|
|
* 販売終了しました。
WavePro 7Zi-Aシリーズ
WavePro 7Zi-Aシリーズは、特にデバッグと解析を最適化するためにまったく新しいフォームファクタとして、クラス最大のタッチスクリーン付き15インチ高分解能WXGA画面による高い操作性を実現していると同時に独自のリムーバブル・フロント・パネルにより、非測定回路の直近でオシロスコープを操作する新しい操作性も提供します。また、ロングメモリを使った信号捕捉で高度な解析を実施しても、
処理能力を大幅に強化し、ストレスなく多角的な解析を行うことが出来るようになりました。さらに新機能TriggerScanとWaveScan機能によりデバッグ/解析で大きな威力を発揮します。
基本仕様
モデル名 |
帯域 |
サンプリング速度(4ch時/2ch時) |
標準メモリ(4ch時/2ch時) |
WavePro 715Zi-A
販売終了
|
1.5 GHz |
10/20 GS/s |
20/40 Mポイント |
WavePro 725Zi-A
販売終了
|
2.5 GHz |
20/40 GS/s |
20/40 Mポイント |
WavePro 735Zi-A
販売終了
|
3.5 GHz |
20/40 GS/s |
20/40 Mポイント |
WavePro 740Zi-A
販売終了
|
4 GHz |
20/40 GS/s |
20/40 Mポイント |
WavePro 760Zi-A
販売終了
|
6 GHz |
20/40 GS/s |
20/40 Mポイント |
モデルごとスペック詳細(モデル名をクリックで詳細表示されます)
 WavePro 715Zi-A スペック
Vertical System
|
Analog (ProBus Input) Bandwidth @ 50 Ω
(-3 dB) |
1.5 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 1 MΩ
(-3 dB) |
500 MHz (typical) (≥5 mV/div) |
Rise Time (10–90%) |
235 ps (typical, flatness mode) |
Rise Time (20–80%) |
176 ps (typical, flatness mode) |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz |
Input Impedance |
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF
with supplied Probe |
Input Coupling |
ProBus Inputs - 1 MΩ: AC, DC, GND; 50
Ω: DC, GND |
Maximum Input Voltage |
50 Ω: ±5 Vrms
1 MΩ: 250 V max. (peak AC: < 10 kHz + DC) |
Channel-Channel Isolation |
DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical) |
Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
Sensitivity |
50 Ω: 2 mV–1 V/div, fully variable
(2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
DC Gain Accuracy |
±1.5% of full scale |
Offset Range |
50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div |
Offset Accuracy |
±(1.5% of full scale + 1.0% of offset
value + 1 mV) |
|
Horizontal System
|
Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
Time/Division Range |
20 ps/div–1000 s/div (RIS mode: 20 ps/div
- 10 ns/div; Roll mode: up to 1000 s/div) |
Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from last
calibration) |
Time Interval Accuracy |
< 0.06 / SR + (clock accuracy* Reading)
(rms) |
Jitter Noise Floor |
1.5 ps (TIE, typical) |
Trigger and Interpolator Jitter |
3 psrms (typical) <0.1 ps rms (typical,
software assisted) |
Channel-Channel Deskew Range |
±9 x time/div. setting, 100 ms max.,
each channel |
External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at the
rear input |
External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
External Clock |
30 MHz–2 GHz, 50 Ω impedance, applied
at the auxiliary input |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
20 GS/s on 2 Ch
10 GS/s on 4 Ch
(Option WPZi-1.5GHZ-4X20GS doubles the sample rate) |
Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20 ps/div
to 10 ns/div) |
Maximum Trigger Rate |
1,000,000 waveforms/second (in Sequence
Mode, up to 4 channels) |
Intersegment Time |
1 µs |
Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 64M / 64M
(15,000)
M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000) |
Standard Memory (4 Ch / 2 Ch / 1Ch)
(Number of Segments) |
20M /40M / 40M
(5000) |
|
Acquisition Processing
|
Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical resolution |
Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
Interpolation |
Linear or Sin x/x |
|
Triggering System
|
Modes |
Normal, Auto, Single, and Stop |
Sources |
Any input channel, Aux, Aux/10, or
line; slope and level unique to each source (except line trigger) |
Coupling Mode |
DC, AC, HFRej, LFRej |
Pre-trigger Delay |
0–100% of memory size (adjustable in 1%
increments of 100 ns) |
Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
Hold-off by Time |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
Internal Trigger Range |
±4.1 div from center |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 1.5 GHz
1.5 div @ < 750 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling) |
External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
Max. Trigger Frequency, SMART Trigger
|
1.5 GHz @ ≥ 10 mV/div (minimum
triggerable width 500 ps) |
|
Basic Triggers
|
Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
Window |
Triggers when signal exits a window
defined by adjustable thresholds |
TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate
(50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8),
Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing
(1:1, 2:1, 4:1, 8 |
|
SMART Triggers
|
State or Edge Qualified |
Triggers on any input source only if a
defined state or edge occurred on another input source. Delay
between sources is selectable by time or events. |
Qualified First |
In Sequence acquisition mode, triggers
repeatably on event B only if a defined pattern, state, or edge
(event A) is satisfied in the first segment of the acquisition.
Holdoff between sources is selectable by time or events. |
Dropout |
Triggers if signal drops out for longer
than selected time between 1 ns and 20 s. |
Pattern |
Logic combination (AND, NAND, OR, NOR)
of 5 inputs (4 channels and external trigger input). Each source can
be high, low, or don’t care. The High and Low level can be selected
independently. Triggers at start or end of the pattern. |
|
SMART Triggers with Exclusion Technology
|
Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Width (Signal or Pattern) |
Triggers on positive, negative, or both
widths with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
Timeout (State/Edge Qualified) |
Triggers on any source if a given state
(or transition edge) has occurred on another source. Delay between
sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between 1
ns and 20 ns. |
Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that condition
is not met |
|
Cascade (Sequence) Triggering
|
Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog). |
Holdoff |
Holdoff between A and B, B and C, C or
D, or any is selectable by time or number of events |
Reset |
Reset between A and B, B and C, C and
D, or any combination is selectable in time or number of events |
|
High Speed Serial Protocol Triggering
|
Pattern Length |
- |
Clock and Data Outputs |
- |
Clock Recovery Jitter |
- |
Hardware Clock Recovery Loop BW |
- |
|
Color Waveform Display
|
Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
Resolution |
WXGA; 1280 x 768 pixels. |
Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
Waveform Representation |
Sample dots joined, or sample dots only |
|
Processor/CPU
|
Type |
Intel® CoreTM 2 Quad, 3 GHz (or better) |
Processor Memory |
8 GB standard |
Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision internal
clocks. |
|
Setup Storage
|
Front Panel and Instrument Status |
Store to the internal hard drive, over
the network, or to a USB-connected peripheral device. |
|
Interface
|
Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
Network Communication Standard |
VXI-11 or VICP, LXI Class C (v 1.2)
Compliant |
GPIB Port (optional) |
Supports IEEE – 488.2 |
LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor. DVI and power connector
to support LeCroy WPZi-EXTDISP-15 additional touch screen display
accessory. Includes support for extended desktop operation with
optional LeCroy or other |
Peripheral Bus |
LeCroy LBUS standard |
|
Auxiliary Output
|
Connector Type |
BNC, located on front |
Signal Types |
Select from calibrator, control signals
or Off |
Output Signal |
500 Hz–5 MHz square wave or DC level;
2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
Control Signals |
Trigger enabled, trigger out, pass/fail
status, off |
|
Power Requirements
|
Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
Max. Power Consumption |
850 W/850 VA |
|
Environmental and Safety
|
Temperature (Operating) |
+5 °C to +40 °C including CD-RW/DVD-ROM
drive |
Temperature (Non-Operating) |
–20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 10 minutes in
each of three orthogonal axes, 30 minutes total |
Random Vibration (Non-Operating) |
2.0 grms 5 Hz to 500 Hz, 10 minutes in
each of three orthogonal axes, 30 minutes total |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes, 18
shocks total |
|
Physical Dimensions
|
Dimensions (HWD) |
14"H x 18.4"W x 11.4"D (355 x 467 x 289
mm) |
Weight |
40.5 lbs. (18.4 kg) |
Shipping Weight |
62 lbs. (28.2 kg) |
|
Certifications
|
Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
|
Warranty and Service
|
Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
|
 WavePro 725Zi-A スペック
Vertical System
|
Analog (ProBus Input) Bandwidth @ 50 Ω
(-3 dB) |
2.5 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 1 MΩ
(-3 dB) |
500 MHz (typical) (≥5 mV/div) |
Rise Time (10–90%) |
150 ps (typical, flatness mode) |
Rise Time (20–80%) |
113 ps (typical, flatness mode) |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz |
Input Impedance |
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF
with supplied Probe |
Input Coupling |
ProBus Inputs - 1 MΩ: AC, DC, GND; 50
Ω: DC, GND |
Maximum Input Voltage |
50 Ω: ±5 Vrms
1 MΩ: 250 V max. (peak AC: < 10 kHz + DC) |
Channel-Channel Isolation |
DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical) |
Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
Sensitivity |
50 Ω: 2 mV–1 V/div, fully variable
(2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
DC Gain Accuracy |
±1.5% of full scale |
Offset Range |
50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div |
Offset Accuracy |
±(1.5% of full scale + 1.0% of offset
value + 1 mV) |
|
Horizontal System
|
Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
Time/Division Range |
20 ps/div–1000 s/div (RIS mode: 20 ps/div
- 10 ns/div; Roll mode: up to 1000 s/div) |
Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from last
calibration) |
Time Interval Accuracy |
< 0.06 / SR + (clock accuracy* Reading)
(rms) |
Jitter Noise Floor |
1.0 ps (TIE, typical) |
Trigger and Interpolator Jitter |
2 psrms (typical) <0.1 ps rms (typical,
software assisted) |
Channel-Channel Deskew Range |
±9 x time/div. setting, 100 ms max.,
each channel |
External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at the
rear input |
External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
External Clock |
30 MHz–2 GHz, 50 Ω impedance, applied
at the auxiliary input |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
40 GS/s on 2 Ch
20 GS/s on 4 Ch |
Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20 ps/div
to 10 ns/div) |
Maximum Trigger Rate |
1,000,000 waveforms/second (in Sequence
Mode, up to 4 channels) |
Intersegment Time |
1 µs |
Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 64M / 64M
(15,000)
M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000) |
Standard Memory (4 Ch / 2 Ch / 1Ch)
(Number of Segments) |
20 M / 40 M / 40M
(5000) |
|
Acquisition Processing
|
Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical resolution |
Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
Interpolation |
Linear or Sin x/x |
|
Triggering System
|
Modes |
Normal, Auto, Single, and Stop |
Sources |
Any input channel, Aux, Aux/10, or
line; slope and level unique to each source (except line trigger) |
Coupling Mode |
DC, AC, HFRej, LFRej |
Pre-trigger Delay |
0–100% of memory size (adjustable in 1%
increments of 100 ns) |
Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
Hold-off by Time |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
Internal Trigger Range |
±4.1 div from center |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 2.5 GHz
1.5 div @ < 1.25 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling) |
External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 300 ps) |
|
Basic Triggers
|
Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
Window |
Triggers when signal exits a window
defined by adjustable thresholds |
TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate
(50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8),
Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing
(1:1, 2:1, 4:1, 8 |
|
SMART Triggers
|
State or Edge Qualified |
Triggers on any input source only if a
defined state or edge occurred on another input source. Delay
between sources is selectable by time or events. |
Qualified First |
In Sequence acquisition mode, triggers
repeatably on event B only if a defined pattern, state, or edge
(event A) is satisfied in the first segment of the acquisition.
Holdoff between sources is selectable by time or events. |
Dropout |
Triggers if signal drops out for longer
than selected time between 1 ns and 20 s. |
Pattern |
Logic combination (AND, NAND, OR, NOR)
of 5 inputs (4 channels and external trigger input). Each source can
be high, low, or don’t care. The High and Low level can be selected
independently. Triggers at start or end of the pattern. |
|
SMART Triggers with Exclusion Technology
|
Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Width (Signal or Pattern) |
Triggers on positive, negative, or both
widths with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
Timeout (State/Edge Qualified) |
Triggers on any source if a given state
(or transition edge) has occurred on another source. Delay between
sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between 1
ns and 20 ns. |
Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that condition
is not met |
|
Cascade (Sequence) Triggering
|
Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog). |
Holdoff |
Holdoff between A and B, B and C, C or
D, or any is selectable by time or number of events |
Reset |
Reset between A and B, B and C, C and
D, or any combination is selectable in time or number of events |
|
High Speed Serial Protocol Triggering
|
Data Rates |
(Option WPZi-MSPT) 100 Mb/s - 1.25 Gb/s |
Pattern Length |
80 bits, NRZ or 8b10b |
Clock and Data Outputs |
400mVp-p (typical) AC coupled |
Clock Recovery Jitter |
1 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density |
Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
|
Color Waveform Display
|
Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
Resolution |
WXGA; 1280 x 768 pixels. |
Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
Waveform Representation |
Sample dots joined, or sample dots only |
|
Processor/CPU
|
Type |
Intel® CoreTM 2 Quad, 3 GHz (or better) |
Processor Memory |
8 GB standard |
Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision internal
clocks. |
|
Setup Storage
|
Front Panel and Instrument Status |
Store to the internal hard drive, over
the network, or to a USB-connected peripheral device. |
|
Interface
|
Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
Network Communication Standard |
VXI-11 or VICP, LXI Class C (v 1.2)
Compliant |
GPIB Port (optional) |
Supports IEEE – 488.2 |
LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor. DVI and power connector
to support LeCroy WPZi-EXTDISP-15 additional touch screen display
accessory. Includes support for extended desktop operation with
optional LeCroy or other |
Peripheral Bus |
LeCroy LBUS standard |
|
Auxiliary Output
|
Connector Type |
BNC, located on front |
Signal Types |
Select from calibrator, control signals
or Off |
Output Signal |
500 Hz–5 MHz square wave or DC level;
2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
Control Signals |
Trigger enabled, trigger out, pass/fail
status, off |
|
Power Requirements
|
Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
Max. Power Consumption |
850 W/850 VA |
|
Environmental and Safety
|
Temperature (Operating) |
+5 °C to +40 °C including CD-RW/DVD-ROM
drive |
Temperature (Non-Operating) |
–20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 10 minutes in
each of three orthogonal axes, 30 minutes total |
Random Vibration (Non-Operating) |
2.0 grms 5 Hz to 500 Hz, 10 minutes in
each of three orthogonal axes, 30 minutes total |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes, 18
shocks total |
|
Physical Dimensions
|
Dimensions (HWD) |
14"H x 18.4"W x 11.4"D (355 x 467 x 289
mm) |
Weight |
40.5 lbs. (18.4 kg) |
Shipping Weight |
62 lbs. (28.2 kg) |
|
Certifications
|
Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
|
Warranty and Service
|
Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
|
 WavePro 735Zi-A スペック
Vertical System
|
Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical) (≥5 mV/div) |
Rise Time (10–90%) |
120ps (typical, flatness mode) |
Rise Time (20–80%) |
90ps (typical, flatness mode) |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 3 GHz |
Input Impedance |
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11
pF with supplied Probe |
Input Coupling |
ProBus Inputs - 1 MΩ: AC, DC, GND; 50
Ω: DC, GND |
Maximum Input Voltage |
50 Ω: ±5 Vrms
1 MΩ: 250 V max. (peak AC: < 10 kHz + DC) |
Channel-Channel Isolation |
DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical) |
Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
Sensitivity |
50 Ω: 2 mV–1 V/div, fully variable
(2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
DC Gain Accuracy |
±1.5% of full scale |
Offset Range |
50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div |
Offset Accuracy |
±(1.5% of full scale + 1.0% of offset
value + 1 mV) |
|
Horizontal System
|
Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
Time/Division Range |
20 ps/div–1000 s/div (RIS mode: 20 ps/div
- 10 ns/div; Roll mode: up to 1000 s/div) |
Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
Jitter Noise Floor |
800 fs (TIE, typical) |
Trigger and Interpolator Jitter |
2 psrms (typical) <0.1 ps rms
(typical, software assisted) |
Channel-Channel Deskew Range |
±9 x time/div. setting, 100 ms max.,
each channel |
External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
External Clock |
30 MHz–2 GHz, 50 Ω impedance, applied
at the auxiliary input |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
40 GS/s on 2 Ch
20 GS/s on 4 Ch |
Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
Intersegment Time |
1 µs |
Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 64M / 64M
(15,000)
M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000) |
Standard Memory (4 Ch / 2 Ch / 1Ch)
(Number of Segments) |
20 M / 40 M / 40M
(5000) |
|
Acquisition Processing
|
Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
Interpolation |
Linear or Sin x/x |
|
Triggering System
|
Modes |
Normal, Auto, Single, and Stop |
Sources |
Any input channel, Aux, Aux/10, or
line; slope and level unique to each source (except line trigger) |
Coupling Mode |
DC, AC, HFRej, LFRej |
Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
Hold-off by Time |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
Internal Trigger Range |
±4.1 div from center |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling) |
External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 250 ps) |
|
Basic Triggers
|
Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
Window |
Triggers when signal exits a window
defined by adjustable thresholds |
TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8 |
|
SMART Triggers
|
State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Delay
between sources is selectable by time or events. |
Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
|
SMART Triggers with Exclusion Technology
|
Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
|
Cascade (Sequence) Triggering
|
Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog). |
Holdoff |
Holdoff between A and B, B and C, C
or D, or any is selectable by time or number of events |
Reset |
Reset between A and B, B and C, C and
D, or any combination is selectable in time or number of events |
|
High Speed Serial Protocol Triggering
|
Data Rates |
(Option WPZi-MSPT) 100 Mb/s - 1.25 Gb/s |
Pattern Length |
80 bits, NRZ or 8b10b |
Clock and Data Outputs |
400mVp-p (typical) AC coupled |
Clock Recovery Jitter |
1 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density |
Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
|
Color Waveform Display
|
Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
Resolution |
WXGA; 1280 x 768 pixels. |
Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
Waveform Representation |
Sample dots joined, or sample dots
only |
|
Processor/CPU
|
Type |
Intel® CoreTM 2 Quad, 3 GHz (or
better) |
Processor Memory |
8 GB standard |
Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
|
Setup Storage
|
Front Panel and Instrument Status |
Store to the internal hard drive,
over the network, or to a USB-connected peripheral device. |
|
Interface
|
Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
Network Communication Standard |
VXI-11 or VICP, LXI Class C (v 1.2)
Compliant |
GPIB Port (optional) |
Supports IEEE – 488.2 |
LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor. DVI and power
connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory. Includes support for extended desktop
operation with optional LeCroy or other |
Peripheral Bus |
LeCroy LBUS standard |
|
Auxiliary Output
|
Connector Type |
BNC, located on front |
Signal Types |
Select from calibrator, control
signals or Off |
Output Signal |
500 Hz–5 MHz square wave or DC level;
2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
|
Power Requirements
|
Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
Max. Power Consumption |
850 W/850 VA |
|
Environmental and Safety
|
Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
Temperature (Non-Operating) |
–20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Random Vibration (Non-Operating) |
2.0 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
|
Physical Dimensions
|
Dimensions (HWD) |
14"H x 18.4"W x 11.4"D (355 x 467 x
289 mm) |
Weight |
40.5 lbs. (18.4 kg) |
Shipping Weight |
62 lbs. (28.2 kg) |
|
Certifications
|
Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and
CSA C22.2 No. 61010-1-04 |
|
Warranty and Service
|
Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
|
 WavePro 740Zi-A スペック
Vertical System
|
Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
4 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical) (≥5 mV/div) |
Rise Time (10–90%) |
105 ps (typical, flatness mode) |
Rise Time (20–80%) |
79 ps (typical, flatness mode) |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 3 GHz |
Input Impedance |
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11
pF with supplied Probe |
Input Coupling |
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
Maximum Input Voltage |
50 Ω (ProBus): ±5 Vrms
50 Ω (ProLink): ±4 Vpeak
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
Channel-Channel Isolation |
DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical) |
Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
Sensitivity |
50 Ω: 2 mV–1 V/div, fully variable
(2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
DC Gain Accuracy |
±1.5% of full scale |
Offset Range |
50 Ω (ProLink):
±750 mV @ 10–118 mV/div
±4 V @ 120 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
& |
Offset Accuracy |
±(1.5% of full scale + 1.0% of offset
value + 1 mV) |
|
Horizontal System
|
Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
Time/Division Range |
20 ps/div–1000 s/div (RIS mode: 20 ps/div
- 10 ns/div; Roll mode: up to 1000 s/div) |
Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
Jitter Noise Floor |
750 fs (TIE, typical) |
Trigger and Interpolator Jitter |
1 psrms (typical) <0.1 ps rms
(typical, software assisted) |
Channel-Channel Deskew Range |
±9 x time/div. setting, 100 ms max.,
each channel |
External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
External Clock |
30 MHz–2 GHz, 50 Ω impedance, applied
at the auxiliary input |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
40 GS/s on 2 Ch
20 GS/s on 4 Ch |
Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
Intersegment Time |
1 µs |
Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 64M / 64M
(15,000)
M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000) |
Standard Memory (4 Ch / 2 Ch / 1Ch)
(Number of Segments) |
20 M / 40 M / 40M
(5000) |
|
Acquisition Processing
|
Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
Interpolation |
Linear or Sin x/x |
|
Triggering System
|
Modes |
Normal, Auto, Single, and Stop |
Sources |
Any input channel, Aux, Aux/10, or
line; slope and level unique to each source (except line trigger) |
Coupling Mode |
DC, AC, HFRej, LFRej |
Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
Hold-off by Time |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
Internal Trigger Range |
±4.1 div from center |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
2 div @ < 4 GHz
1.5 div @ < 2 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling) |
External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
|
Basic Triggers
|
Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
Window |
Triggers when signal exits a window
defined by adjustable thresholds |
TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8 |
|
SMART Triggers
|
State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Delay
between sources is selectable by time or events. |
Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
|
SMART Triggers with Exclusion Technology
|
Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
|
Cascade (Sequence) Triggering
|
Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog). |
Holdoff |
Holdoff between A and B, B and C, C
or D, or any is selectable by time or number of events |
Reset |
Reset between A and B, B and C, C and
D, or any combination is selectable in time or number of events |
|
High Speed Serial Protocol Triggering
|
Data Rates |
(Option WPZi-HSPT) 100 Mb/s - 2.7,
3.0, 3.125 Gb/s |
Pattern Length |
80 bits, NRZ or 8b10b |
Clock and Data Outputs |
400mVp-p (typical) AC coupled |
Clock Recovery Jitter |
1 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density |
Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
|
Color Waveform Display
|
Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
Resolution |
WXGA; 1280 x 768 pixels. |
Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
Waveform Representation |
Sample dots joined, or sample dots
only |
|
Processor/CPU
|
Type |
Intel® CoreTM 2 Quad, 3 GHz (or
better) |
Processor Memory |
8 GB standard |
Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
|
Setup Storage
|
Front Panel and Instrument Status |
Store to the internal hard drive,
over the network, or to a USB-connected peripheral device. |
|
Interface
|
Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
Network Communication Standard |
VXI-11 or VICP, LXI Class C (v 1.2)
Compliant |
GPIB Port (optional) |
Supports IEEE – 488.2 |
LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor. DVI and power
connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory. Includes support for extended desktop
operation with optional LeCroy or other |
Peripheral Bus |
LeCroy LBUS standard |
|
Auxiliary Output
|
Connector Type |
BNC, located on front |
Signal Types |
Select from calibrator, control
signals or Off |
Output Signal |
500 Hz–5 MHz square wave or DC level;
2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
|
Power Requirements
|
Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
Max. Power Consumption |
850 W/850 VA |
|
Environmental and Safety
|
Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
Temperature (Non-Operating) |
–20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Random Vibration (Non-Operating) |
2.0 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
|
Physical Dimensions
|
Dimensions (HWD) |
14"H x 18.4"W x 11.4"D (355 x 467 x
289 mm) |
Weight |
40.5 lbs. (18.4 kg) |
Shipping Weight |
62 lbs. (28.2 kg) |
|
Certifications
|
Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and
CSA C22.2 No. 61010-1-04 |
|
Warranty and Service
|
Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
|
 WavePro 760Zi-A スペック
Vertical System
|
Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
6 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz (≥10 mV/div) |
Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical) (≥5 mV/div) |
Rise Time (10–90%) |
70 ps (typical, flatness mode) |
Rise Time (20–80%) |
53 ps (typical, flatness mode) |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 3 GHz, 4 GHz |
Input Impedance |
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11
pF with supplied Probe |
Input Coupling |
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
Maximum Input Voltage |
50 Ω (ProBus): ±5 Vrms
50 Ω (ProLink): ±4 Vpeak
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
Channel-Channel Isolation |
DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical) |
Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
Sensitivity |
50 Ω: 2 mV–1 V/div, fully variable
(2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
DC Gain Accuracy |
±1.5% of full scale |
Offset Range |
50 Ω (ProLink):
±750 mV @ 10–118 mV/div
±4 V @ 120 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
& |
Offset Accuracy |
±(1.5% of full scale + 1.0% of offset
value + 1 mV) |
|
Horizontal System
|
Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
Time/Division Range |
20 ps/div–1000 s/div (RIS mode: 20 ps/div
- 10 ns/div; Roll mode: up to 1000 s/div) |
Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
Jitter Noise Floor |
560 fs (TIE, typical) |
Trigger and Interpolator Jitter |
1 psrms (typical) <0.1 ps rms
(typical, software assisted) |
Channel-Channel Deskew Range |
±9 x time/div. setting, 100 ms max.,
each channel |
External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
External Clock |
30 MHz–2 GHz, 50 Ω impedance, applied
at the auxiliary input |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
40 GS/s on 2 Ch
20 GS/s on 4 Ch |
Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
Intersegment Time |
1 µs |
Memory Options (4 Ch / 2 Ch / 1Ch) |
S-32 Option:
32M / 64M / 64M
(15,000)
M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000) |
Standard Memory (4 Ch / 2 Ch / 1Ch)
(Number of Segments) |
20 M / 40 M / 40M
(5000) |
|
Acquisition Processing
|
Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
Interpolation |
Linear or Sin x/x |
|
Triggering System
|
Modes |
Normal, Auto, Single, and Stop |
Sources |
Any input channel, Aux, Aux/10, or
line; slope and level unique to each source (except line trigger) |
Coupling Mode |
DC, AC, HFRej, LFRej |
Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
Hold-off by Time |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
Internal Trigger Range |
±4.1 div from center |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
2 div @ < 6 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling) |
External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
|
Basic Triggers
|
Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
Window |
Triggers when signal exits a window
defined by adjustable thresholds |
TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8 |
|
SMART Triggers
|
State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Delay
between sources is selectable by time or events. |
Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
|
SMART Triggers with Exclusion Technology
|
Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps (depending on
oscilloscope bandwidth) to 20 s, or on intermittent faults. |
Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
|
Cascade (Sequence) Triggering
|
Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog). |
Holdoff |
Holdoff between A and B, B and C, C
or D, or any is selectable by time or number of events |
Reset |
Reset between A and B, B and C, C and
D, or any combination is selectable in time or number of events |
|
High Speed Serial Protocol Triggering
|
Data Rates |
(Option WPZi-HSPT) 100 Mb/s - 2.7,
3.0, 3.125 Gb/s |
Pattern Length |
80 bits, NRZ or 8b10b |
Clock and Data Outputs |
400mVp-p (typical) AC coupled |
Clock Recovery Jitter |
1 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density |
Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
|
Color Waveform Display
|
Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
Resolution |
WXGA; 1280 x 768 pixels. |
Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
Waveform Representation |
Sample dots joined, or sample dots
only |
|
Processor/CPU
|
Type |
Intel® CoreTM 2 Quad, 3 GHz (or
better) |
Processor Memory |
8 GB standard |
Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
|
Setup Storage
|
Front Panel and Instrument Status |
Store to the internal hard drive,
over the network, or to a USB-connected peripheral device. |
|
Interface
|
Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
Network Communication Standard |
VXI-11 or VICP, LXI Class C (v 1.2)
Compliant |
GPIB Port (optional) |
Supports IEEE – 488.2 |
LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor. DVI and power
connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory. Includes support for extended desktop
operation with optional LeCroy or other |
Peripheral Bus |
LeCroy LBUS standard |
|
Auxiliary Output
|
Connector Type |
BNC, located on front |
Signal Types |
Select from calibrator, control
signals or Off |
Output Signal |
500 Hz–5 MHz square wave or DC level;
2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
|
Power Requirements
|
Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
Max. Power Consumption |
850 W/850 VA |
|
Environmental and Safety
|
Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
Temperature (Non-Operating) |
–20 °C to +60 °C |
Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Random Vibration (Non-Operating) |
2.0 grms 5 Hz to 500 Hz, 10 minutes
in each of three orthogonal axes, 30 minutes total |
Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
|
Physical Dimensions
|
Dimensions (HWD) |
14"H x 18.4"W x 11.4"D (355 x 467 x
289 mm) |
Weight |
40.5 lbs. (18.4 kg) |
Shipping Weight |
62 lbs. (28.2 kg) |
|
Certifications
|
Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and
CSA C22.2 No. 61010-1-04 |
|
Warranty and Service
|
Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
|
WavePro 7Ziシリーズ スペック詳細 (PDF:700K)
ページトップへ

- 1.5 〜 6 GHz帯域(帯域アップグレード可能)
- 標準メモリ:20Mポイント(4ch時)/40Mポイント(2ch時)
- 最大メモリ:128Mポイント(4ch時)/256Mポイント(2ch時)
- サンプリングレート:20GS/s(4ch時)/ 40GS/s(2ch時)
- 80ビットシリアル・パターン・トリガ(オプション、WavePro715Zi非対応)
デモビデオ(計測方法などを解説)
基本的な活用方法を、ビデオで解説しています。
WavePro 7Ziシリーズ デモビデオ
高い汎用性
従来、4GHzを超える帯域のオシロスコープは、その帯域を確保することができる50Ω入力のみを備え、パッシブ・プローブなど汎用的なプローブの接続には、高インピーダンス変換アダプタの使用が必要となっていましたが、 WavePro 7Zi-Aシリーズでは高インピーダンス入力を標
準装備とし、また、ミックスド・シグナル・オプションに対応しているので、幅広いアプリケーションに簡単に対応で
きます。
帯域幅アップグレードが可能:1.5〜6GHz
すべてのWavePro 7Zi-Aシリーズのオシロスコープは、単一のハードウェア・プラットフ
ォームで設計されています。1.5〜6GHzの全帯域に渡ってアップグレードが最小のコス
トで可能です。
X-Stream IIストリーミング・アーキテクチャ
X-Stream IIストリーミング・アーキテクチャでは、複数の100Mポイント波形(またはそれ以上の波形)を、オシロスコープで同時に処理するときでも、データ処理能力を高く
保つことを保証します。X-Stream IIでは、アクセス速度が速いCPUキャッシュメモリの使用効率を上げるために、波形データをキャッシュに合わせた可変長の波形セグメン
トに分割して処理することで、ボトルネックとなるメイン
メモリのアクセスを最小回数に抑えるので、計算速度が向上します。その結果、他のオシロスコープと比べて10〜100倍の処理速度が実現されます。

ロング・メモリ処理の最適化
X-Stream IIストリーミング・アーキテクチャでは、64ビットのオペレーティング・システムが広大なメモリ領域をリニアに扱えるので、
ロングメモリの波形データも制限なく取り扱うことが出来ます。
また、波形データをCPUキャッシュ・メモリに収まるサイズの可変長セグメントに分割できるため、解析の種類に関わらず、
実質的に解析メモリの長さに関する制限がありません。従来のアーキテクチャによる他のオシロスコープではこのような特性がサポートされず、
通常、最適な条件下でも解析メモリの長さは捕捉メモリの長さの5〜20%に制限されます。
応答性の最適化
WavePro 7Zi-Aシリーズでは、動的にバッファを割り当てることにより、演算処理の効率化を図ることで、フロント・パネルの応答性を最大化しています。また、フロント・パネルのコントロールの変更が行われると、実行中の処理が中断され、変更後の設定が即座に反映されます。また、波形のプレビューでは最終演算結果が表示されるまで、一時的に中間計算結果を表示し、スムーズな操作性を支援します。
ページトップへ
WaveScanTMの高度な検索/解析機能で検出可能
WaveScanには、異常イベント検出とソフトウェア・トリガ機能の両方が備わっています。
異常イベント検出ロングメモリを活かしてシングル・ショットで捕捉した波形の中の異常イベントを約30種類
(オプションでさらに増えます)の検索モードと検索条件を指定して検出することができます。検出された異常イベントが、
画面上にハイライト表示され、該当するイベントを一覧で確認できます。
一覧表示内のイベントをクリックすると、その箇所にジャンプします。
Trigger Scan
(異常波形を捕捉するプログラマブルトリガ)
あらかじめ設定したトリガ条件を自動的に切替えることにより、トリガ条件による波形スキャン機能を実現。これにより、異常波形データを高い確率で捕捉することがきる上に、その波形データそのものを解析することができます。
( 参考資料
テク ニカルノートTrigger Scan)

外部転送用インタフェースに LSIB(PCI ExpressCable)を採用!
PCI Express Cableを外部転送インタフェースとして採用することにより、従来比で数十倍〜数百倍の250MB/secものデータ転送スピードを実現しました(LSIBオプションが必要)。これにより、高エネルギー物理関連の大規模実験施設や物理・化学関連の実験効率を飛躍的に高めることができます。
ページトップへ
リムーバブル・フロント・パネル 
オシロスコープから取り外して、測定作業の直近で操作が可能。また将来のカスタマイズにも対応予定。
 外部ディスプレイ(オプション)
外部ディスプレイを拡張デスクトップに設定して、特定のオシロスコープの機能を表示することができます。
ミックスド・シグナル・オプション(オプション)
接続するだけで最大36本・最高2GS/sのデジタル・チャンネルが追加され、ミックスド・シグナル・オシロスコープに変身。
( MSシリーズ詳細ページへ)
各種解析オプション
各種コンプライアンステスト、ジッタ解析、スペクトラムアナライザ解析、統計解析、光ディスク解析など多種多様の解析オプションを追加することができます
低速バスオプション
CAN, LIN, FlexRayをはじめとする車載LANインタフェースをはじめ、I2C, SPI,UART等の汎用インタフェースのトリガ&デコード機能を追加することができます(FlexRayTDPはEYEパターンによる物理層解析機能にも対応)。
ページトップへ
クリックで詳細表示されます
ミックスド・シグナル・ソリューション
HDA125-18-LBUS
12.5GS/s高速ミックスド・シグナル・オプション
(18チャンネルQuickLinkリードセット、LBUS接続) |
HDA125-09-LBUS
12.5GS/s高速ミックスド・シグナル・オプション
(9チャンネルQuickLinkリードセット、LBUS接続) |
MS-500
最高500MHz、18ch、帯域ミックスド・シグナル・オプション |
MS-500-36
最高250MHz帯域、36ch、ミックスド・シグナル・オプション |
MS-250
最高250MHz帯域、18ch、ミックスド・シグナル・オプション |
メモリオプション
WPZi-A-S-32
32 Mpt/Ch (64 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
WPZi-A-M-64
64 Mpt/Ch (128 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
WPZi-A-L-128
128 Mpt/Ch (256 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
サンプリングレート・オプション
WPZi-1.5GHz-4X20GS
20 GS/s (40 GS/s Interleaved) Sampling Rate
Option for 1.5 GHz WavePro Zi |
ハードウエア・オプション
WPZi-8-UPG-32GBRAM
Upgrade from 8 GB to 32 GB CPU RAM |
WPZi-500GB-HD
Upgrade from standard size hard drive to 500
GB hard drive |
WPZi-500GB-RHD-02
Additional 500 GB Hard Drive for WPZi.
Includes Windows Vista OS, LeCroy
oscilloscope software and critical scope
operational file duplicates. |
Remote Control/Network Options
GPIB-2
IEEE 488 GPIB Interface |
電源解析
トリガ/デコード・パッケージ
WPZI-1553 TD
MIL-STD-1553用トリガ・デコード・オプション |
WPZI-1553 TDME
MIL-STD-1553 Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-8B10B D
8B10Bプロトコル・デコーディング・オプション |
WPZI-ARINC429BUS DME SYMBOLIC
ARINC 429 Bus Symbolic Decode, Measure/Graph, and Eye Diagram Option |
WPZI-ARINC429BUS DSYMBOLIC
ARINC 429 Bus Symbolic Decode option |
WPZI-MDIObus D
MDIOデコード・オプション |
WPZI-AudioBus TD
AudioBus-I2S トリガ・デコード・オプション |
WPZI-AudioBus TDG
AudioBusトリガ/デコード/グラフ・パッケージ |
WPZI-CANbus TD
CAN用トリガ/デコード・オプション |
WPZI-CANbus TDME
CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-CAN FDbus TD
CAN FD用トリガ/デコード・オプション |
WPZI-CAN FDbus TDME
CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-CAN FDbus TDME SYMBOLIC
CAN FD Symbolic Trigger, Decode, and Measure/Graph, and Eye Diagram Option |
WPZI-DigRFV4bus D
DigRF V4デコード・オプション |
WPZI-DigRF3Gbus D
DigRF 3Gデコード・オプション |
WPZI-DPHYbus D
MIPI D-PHYデコード・オプション |
WPZI-DPHYbus DP
MIPI D-PHYデコード物理層試験パッケージ |
WPZI-EMB TD
Bundle: Includes I2C, SPI, UART-RS232 Trigger and Decode Options |
WPZI-EMB TDME
Bundle: Incl. I2C, SPI, UART-RS232 Trigger, Decode, Measure/Graph, and Eye Diagram Opt. |
WPZI-ENETbus D
イーサネット・デコード・オプション |
WPZI-FCbus D
Fiber Channel用デコード・オプション |
WPZI-FlexrayBus TD
FlexRay用トリガ/デコード・オプション |
WPZI-FlexRaybus TDMP
FlexRay Trigger, Decode, Measure/Graph and Physical Layer Option |
WPZi-HSPT
100 Mb/s to 3.125 Gb/s High Speed Serial Trigger Option for 4-6 GHz Oscilloscopes & Disk Drive Analyzer |
WPZI-I2Cbus TD
I2C用トリガ/デコード・オプション |
WPZI-I2CBUS TDME
I2C Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-LINbus TD
LIN用トリガ/デコード・オプション |
WPZI-LINBUS TDME
LIN Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-Manchesterbus D
Manchesterbus用デコード・オプション |
WPZI-MPHYbus D
MIPI M-PHYデコード・オプション |
WPZI-MPHYbus DP
MIPI M-PHYデコード・オプション |
WPZI-MSO-EMB TD
Bundle: MS-500-36 with I2C, SPI, UART and RS-232 Trigger and Decodes |
WPZI-MSO-EMB TDME
Bundle: MS-500-36 with I2C, SPI, UART-RS-232 Trig, Decode, Measure/Graph and Eye Opt. |
WPZi-MSPT
ミディアムスピード・シリアル・トリガ |
WPZI-NRZbus D
NRZ用デコード・オプション |
WPZI-PCIebus D
PCI Expressトリガ・デコード・オプション |
WPZI-ProtoBus MAG
PROTObus MAG シリアル・デバッグ・ツールキット |
WPZI-ProtoSync
デコード情報とプロトコル・アナライザ同期オプション |
WPZI-PROTOSYNC-BT
プロトコル解析オプション(Bit Tracer機能付) |
WPZI-SASbus D
SAS用デコード・オプション |
WPZI-SATAbus TD
SATA用トリガ・デコード・オプション |
WPZI-SENTbus D
SENTデコード・オプション |
WPZI-SpaceWirebus D
SpaceWireデコード・オプション |
WPZI-SPIbus TD
SPI用トリガ/デコード・オプション |
WPZI-SPIBUS TDME
SPI Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-UART-RS232bus TD
UART-RS232用トリガ/デコード・オプション |
WPZI-UART-RS232BUS TDME
UART-RS232 Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZI-UNIPRObus D
UniProデコード・オプション |
WPZI-UPG-MPHY-UNIPRObus D
MPHY to UniPro Decoder Software Upgrade MPHY REQUIRED |
WPZI-USB2-HSICbus D
USB 2.0 HSICデコード・オプション |
WPZI-USB2bus TD
USB 2.0トリガ・デコード・オプション |
WPZI-USB2bus TDME
USB 2.0 Trigger, Decode, Measure/Graph, and Eye Diagram Option |
WPZi-USB3bus D
USB3.0.デコード・オプション |
ジッタ解析パッケージ
デジタル・フィルタ・パッケージ
高速転送・制御インタフェース
コンプライアンス・テスト・パッケージ
シリアル・データ解析
WPZi-SDAIII
シリアルデータ・メジャメント・パッケージ |
WPZi-SDAIII-CompleteLinQ
Bundle - Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe |
WPZi-SDAIII-CrossLinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements |
WPZi-SDAIII-Crosstalk
Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements |
WPZi-SDAIII-LinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements |
WPZi-EYEDRII
Eye Doctor(シグナル・インテグリティ・ツ ール) |
WPZi-EYEDRII-VP
Bundle - EyeDrII and VirtualProbe Toolkits |
WPZi-VIRTUALPROBE
Advanced De-embedding, Emulation and Virtual Probing Toolkit |
WPZi-CBL-DE-EMBED
ケーブル・デエンベデッド |
その他、汎用ソフトウエア
その他オプション
オシロスコープチャンネル同期オプション
データストレージ解析
ミックスド・シグナル・アクセサリ
PK400-1
大型グリッパ・プローブ・セット − 2.54mmピン・ピッチ用、色分け導線が付いた10個のプローブからなるセット |
PK400-2
中型グリッパ・プローブ・セット − 1.0mmピン・ピッチ用、色分け導線が付いた10個のプローブからなるセット |
PK400-3
小型グリッパ・プローブ・セット − 0.2mmピン・ピッチ用、色分け導線が付いた10個のプローブからなるセット |
MSO-MICTOR
36ピンMictorインタフェース・ケーブル |
MSO-3M
18ピン3Mインタフェース・ケーブル (3Mパーツ番号2520-6002とともに使用)
|
テスト・フィクスチャ
クリックで詳細表示されます
プローブ・アダプタ
アクティブ・プローブ
ZS1500
1.5GHz ハイインピーダンス・アクティブ・プローブ |
ZS1000
1GHz ハイインピーダンス・アクティブ・プローブ |
ZS1500
1.5GHz ハイインピーダンス・アクティブ・プローブ |
ZS1000
1GHz ハイインピーダンス・アクティブ・プローブ |
電流プローブ
CP030/CP030A
電流プローブ、DC〜50MHz 30A (DC)、 50A(ピーク) 、CP030Aは最高感度1mA/div |
CP031/CP031A
電流プローブ、DC〜100MHz 30A (DC)、 50A(ピーク) 、CP031Aは最高感度1mA/div |
CP150
電流プローブ、DC〜10MHz 150A (DC)、500A(ピーク) |
CP500
電流プローブ、DC〜2MHz 500A (DC)、700A(ピーク) |
DCS025
電流プローブ用スキュー調整ジグ |
CA10
サードパーティ製電流測定デバイス用アダプタ |
CA10-QUADPAK
サードパーティ製電流測定デバイス用アダプタ(4個セット) |
差動アンプ
DA1855A
100MHz高精度・オフセット機能付き差動アンプ 1ch仕様 (ProBus対応) |
DXC100A
DAシリーズ用ペア・プローブ:250MHz* 10:1/100:1 1MΩ 10.5pF |
DXC200
DAシリーズ用ペア・プローブ:50MHz 1:1 30pF |
DXC-5100
DAシリーズ用ペア・プローブ:250MHz(DA1855A使用時は100MHz) 100:1 2.75pF 最大入力電圧 2,500VDC+Peak |
DA101
10:1 1MΩ受動アッテネータ (DXC5100用) |
DA1855A-PR2
100MHz高精度・オフセット機能付き差動アンプ 2ch仕様 (ProBus対応) |
DA1855A-PR2-RM
100MHz高精度・オフセット機能付き差動アンプ 2ch仕様 (ProBus対応) ラックマウント仕様 (後付不可) |
差動プローブ
AP033
500MHz差動プローブ |
ZD1500
1.5GHz, 1.0 pF 差動プローブ |
ZD1000
1GHz、1.0 pF、差動プローブ |
ZD500
500MHz、差動プローブ |
ZD200
200 MHz、3.5 pF、差動プローブ |
D410-PS
4 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1) |
D420-PS
4 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1) |
D610-PS
6 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1) |
D620-PS
6 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1) |
D410
WL300/WL-PLINK/WL-Pbus用スモールチップ・モジュール(帯域:4GHz・ダイナミックレンジ:±1.25V)ル |
D420
WL300/WL-PLINK/WL-Pbus用スモールチップ・モジュール(帯域:4GHz・ダイナミックレンジ:±2.5V) |
D610
WL600/WL-PLINK/WL-Pbus用スモールチップ・モジュール(帯域:6GHz・ダイナミックレンジ:±1.25V)) |
D620
WL600/WL-PLINK/WL-Pbus用スモールチップ・モジュール(帯域:6GHz・ダイナミックレンジ:±2.5V)) |
D600A-AT
WL600/WL-PLINK/WL-Pbus用可変チップ・モジュール(2.4V差動:6GHzオシロスコープ測定時、6GHz帯域)) |
D400A-AT
WaveLink D400 4 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips |
WL-PBUS-CASE
WaveLink ProBus Platform/Cable Assembly Kit for D410, D420, and D400A-AT WaveLink Probes. |
Dx10-PT-KIT
D310/D410/D610用PTブラウジング・リード・キット) |
Dx20-PT-KIT
D320/D420/D620用PTブラウジング・リード・キット |
Dx10-HiTemp
WaveLink Temperature Extension cables for Dx10. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set |
Dx20-HiTemp
WaveLink Temperature Extension cables for Dx20. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set |
Dx10-SI
Replacement Solder tip lead set for D410/D610 |
Dx20-SI
Replacement Solder tip lead set for D420/D620 |
高圧差動プローブ
高圧プローブ
HVP120
400MHz、50MΩ、1kVrms-6kV(過渡)、高圧プローブ |
PPE4KV
高圧プローブ、耐圧4kV、100:1、400MHz帯域、50MΩ、<6pF、2mケーブル |
PPE5KV
高圧プローブ、耐圧4kV、100:1、400MHz帯域、50MΩ、<6pF、2mケーブル |
PPE6KV
高圧プローブ、耐圧6kV、1000:1、400MHz帯域、50MΩ、<6pF、2mケーブル、 |
O/E変換器
OE425
5GHz 500-870nm O/Eコンバータ (ProBus入力用) |
OE455
3.5GHz 950-1630nm O/Eコンバータ (ProBus入力用) |
OE525
5GHz 500-870nm O/Eコンバータ (ProLink入力用) |
OE555
3.5GHz 950-1630nm O/Eコンバータ (ProLink入力用) |
パッシブ・プローブ
PP008-1
10:1プローブ 10MΩ、9.5pF 500MHz帯域 |
PP009-1
10:1プローブ 10MΩ、9.5pF 500MHz帯域 |
PP025-1
10:1プローブ 10MΩ、10pF 500MHz帯域 |
プローブ・キット
|
|
|