高分解能オシロスコープ
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(日本語字幕付きデモビデオ) ● 低価格、高分解能オシロスコープ WaveSurfer 4000HD登場!! ● WaveSurfer 4000HDのノイズ性能 他社比較 |
基本仕様
| モデル名 | 帯域 | ch数 | サンプリ ング速度 垂直分解能 |
標準メモリ | 価格（税別） |
|---|---|---|---|---|---|
| WaveSurfer 4024HD |
200MHz | 4ch | 2.5GS/s* 12ビット |
12.5M ポイント** |
 製品 ラインナップ （価格一覧） |
| WaveSurfer 4034HD
|
350MHz | 4ch | |||
| WaveSurfer 4054HD
|
500MHz | 4ch | |||
| WaveSurfer 4104HD
|
1GHz | 4ch | |||
| ミックスド・シグナル・オシロスコープ | |||||
| WaveSurfer 4024HD + WS4KHD-MSO *** |
200MHz | 4ch | 2.5GS/s* 12ビット デジタル 入力： 16ch |
12.5M ポイント** |
170万円 |
| WaveSurfer 4034HD
+ WS4KHD-MSO *** |
350MHz | 4ch | 212万円 |
||
| WaveSurfer 4054HD + WS4KHD-MSO *** |
500MHz | 4ch | 244万円 |
||
| WaveSurfer 4104HD + WS4KHD-MSO *** |
1GHz | 4ch | 274万円 |
||
|
* インターリーブ時：
5GS/s ** インターリーブ時： 25M ポイント *** ミックスド・シグナル・オプション(税別52万円) ※ 価格は2023年4月現在のものです。 |
|||||
モデルごとスペック詳細（モデル名をクリックで詳細表示されます）
WaveSurfer 4024HD スペックVertical - Analog Channels | |
| Analog Bandwidth (Max) | 200 MHz |
| Bandwidth | 10.74"H x 14.96"W x 6.30"D (273 mm x 380 mm x 160 mm) |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 200 MHz |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 200 MHz |
| Rise Time (10-90%, 50 Ω) | 1.75 ns |
| Input Channels | 4 |
| Input Channels | 11.7 lbs (5.3 kg) |
| Vertical Resolution | 12 bits; up to 15 bits with enhanced resolution (ERES) |
| Vertical Resolution | 20.06 lbs (9.1 kg) |
| Effective Number of Bits (ENOB) | 8.6 |
| Vertical Noise Floor (1 mV/div) | 65 uVrms |
| Vertical Noise Floor (2 mV/div) | 65 uVrms |
| Vertical Noise Floor (5 mV/div) | 65 uVrms |
| Vertical Noise Floor (10 mV/div) | 69 uVrms |
| Vertical Noise Floor (20 mV/div) | 94 uVrms |
| Vertical Noise Floor (50 mV/div) | 162 uVrms |
| Vertical Noise Floor (100 mV/div) | 270 uVrms |
| Vertical Noise Floor (200 mV/div) | 963 uVrms |
| Vertical Noise Floor (500 mV/div) | 1.63 mVrms |
| Vertical Noise Floor (1 V/div) | 2.70 mVrms |
| Sensitivity | 1 MΩ: 1 mV/div - 10 V/div, fully variable; 50 Ω: 1 mV/div - 1 V/div, fully variable |
| DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(0.5%) FS, offset at 0 V |
| Channel-Channel Isolation | 60 dB (For any two ProBus input channels, same v/div settings, typical) |
| Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div 1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 198 mV/div ±160 V @ 200 mV - 1 V/div ±400 V @ 1.02 V - 10 V/div |
| DC Vertical Offset Accuracy | ±(1.0% of offset setting + 0.5% FS + 0.02% of max offset + 1mV) |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz) |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Input Impedance | 50 Ω ± 2.0% or 1 MΩ || 15 pF |
| Bandwidth Limiters | 20 MHz |
| Rescaling | Electrical: volts, amps |
Horizontal - Analog Channels | |
| Timebases | Internal timebase common to 4 input channels |
| Acquisition Modes | Real-time, Roll, Average, Sequence |
| Time/Division Range | 500 ps/div - 100 s/div Roll Mode available at ≥ 50 ms/div |
| Clock Accuracy | +/-2.5ppm + 1.0ppm/year from calibration |
| Channel-Channel Deskew Range | < 5us/div, ± 100 ns, each channel ≥ 5us/div, ± (Tdiv x 0.04), each channel |
Acquisition - Analog Channels | |
| Sample Rate | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 |
| Maximum Acquisition Memory | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
| Sample Rate (Single-shot) | 5 GS/s on 2 Ch 2.5 GS/s on 4 Ch |
| Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 12.5M / 25M (1,000) |
| Intersegment Time | 1 µs |
| Enhanced Resolution (ERES) | From 12.5 to 15 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
Vertical, Horizontal, Acquisition - Digital Channels | |
| Maximum Input Frequency | 125 MHz |
| Minimum Detectable Pulse Width | 4 ns |
| Input Channels | 16 Digital channels (with WS4KHD-MSO option) |
| Input Impedance (Flying Leads) | 100 kΩ || 5 pF |
| Input Dynamic Range | ±20V |
| Maximum Input Voltage | ±30V Peak |
| Maximum Input Voltage Swing | 500mVpp |
| Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 |
| Threshold Selections | TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined |
| Threshold Accuracy | ±(3% of threshold setting + 100mV) |
| User Defined Threshold Range | ±10V in 20 mV steps |
| Sample Rate | 500 MS/s |
| Record Length | 12.5 MS - 16 Channels |
| Channel-to-Channel Skew | ±(1 digital sample) |
Triggering System | |
| Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 200MHz |
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/5, AC Line |
| Coupling | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0-100% of memory size |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Hold-off | 10 ns up to 20s or from 1 to 100,000,000 |
| Trigger and Interpolator Jitter | ≤ 8 psrms (typical) |
| Internal Trigger Level Range | ±4.1 Divisions |
| External Trigger Level Range | Ext: ±0.61 V, EXT/5: ±3.05 V |
| Maximum Trigger Rate | ≤ 175,000 waveforms/second |
| Trigger Sensitivity with Edge Trigger ProBus Inputs | 0.9 division: DC - 10 MHz 1 division: 10 MHz - 200 MHz |
| Trigger Sensitivity with Edge Trigger (Aux Input) | Ext: 200 mV from DC to 10 MHz 300 mV from 10 MHz to 200 MHz Ext/5: 1 V from DC to 10 MHz 1.5 V from 10 MHz to 200 MHz |
Trigger Types | |
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| Width | Triggers on positive or negative glitches with selectable widths. minimum width 2 ns, Maximum Width: 20 s |
| Window | Triggers when signal exits a window defined by adjustable thresholds |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Interval | Triggers on intervals selectable between 1 ns and 20 s. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Multi-Stage: Qualified (Timeout or State/Edge Qualified) | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time. |
| Triggers with Exclusion Technology | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Low Speed Serial Protocol Trigger (Optional) | |
| Supported Protocols | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM) |
Math Tools | |
| Math Functionality | Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform. |
| Math Operators - Basic Math | Delay (from trigger, 50%), Duty Cycle, Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width- |
| Math Operators - Digital (incl. with MSO models/options) | Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top. |
| Math Operators - Filters | Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width- |
| Math Operators - Functions | Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. |
| Math Operators - Other | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Invert (negate), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+). |
Pass/Fail Testing | |
| Pass/Fail Testing | Enhanced resolution (to 15 bits vertical) |
Three-phase Electrical and Mechanical Motor Drive Analysis Software | |
| Setup Capability | FFT (power spectrum, magnitude), up to 500 kpts record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows. |
| Numerics Measurement Table Selections | Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity). |
| Per-cycle "Synthesized" Waveforms and Statistics | Trend (datalog) of up to 1000 measurement parameters |
| Harmonics Calculation Option (MDA800-HARMONICS) | Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook. |
Integrated Second Display | |
| Size | Color 12.1" widescreen capacitive touch screen |
| Resolution | 1200 x 800 |
LeCroy WaveStream™ Fast Viewing Mode | |
| Intensity | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Types | Auto, Single,X-Y, Single+X-Y |
| Number of Channels | Sample dots joined, or sample dots only |
High Speed Digitizer Output (Option) | |
| Type | Variable saturation levels; stores each trace’s persistence data in memory |
| Transfer Rate | Select analog or color |
| Output Protocol | Activate persistence on all traces |
| Control Protocol | Select from 1.00 s to infinity |
Calibration | |
| Auto Calibration | Display up to 8 Zooms |
| Calibration Stability | 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored on the internal microSD card or external USB device, limited only by the data storage media capacity |
Processor/CPU | |
| Type | Store to the internal microSD, over the network, or to a USB-connected peripheral device. |
| Processor Memory | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals |
| Operating System | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range |
| Oscilloscope Operating Software | Ensures specified DC and timing accuracy is maintained for 1 year minimum. |
| Real Time Clock | Calibration ensured within +/-5°C operating temperature. Manual calibration may be invoked if outside this temperature range. |
Connectivity | |
| Ethernet Port | TI AM5728 Sitara Processor |
| USB Host Ports | 2 GB |
| USB Device Port | Microsoft Windows CE |
| GPIB Port (optional) | Teledyne LeCroy MAUI™ |
| External Monitor Port | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
| Remote Control | Supports 10/100BaseT Ethernet interface (RJ45 port) |
| Network Communication Standard | 2 side USB 2.0 ports, 2 front USB 3.1 Gen 1 ports |
| LSIB Port (optional) | 1 port - USBTMC over USB 2.0 |
| Serial Port | Supports IEEE - 488.2 (External) |
| Peripheral Bus | 1 x HDMI, supports up to 1280x800 |
Auxiliary Input | |
| Signal Types | Via Windows Automation, or via LeCroy Remote Command Set |
| Coupling | VXI-11 or VICP, LXI Compatible |
Auxiliary Output | |
| Control Signals | Select External Trigger on the rear panel |
| Connector Type | 50 Ω: DC; 1 MΩ: DC |
Probes | |
| Probes | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz) |
| Probe System | Always Trig Out |
| Scale Factors | 3.3 V into 1 MΩ pulse > 1.3 ms |
| Calibration Output | Trigger out |
Power Requirements | |
| Voltage | BNC, located on back |
| Nominal Power Consumption | Qty. (4) ÷10 Passive Probes |
| Max. Power Consumption | ProBus. Automatically detects and supports a variety of compatible probes |
Environmental | |
| Temperature (Operating) | Automatically or manually selected depending on probe used |
| Temperature (Non-Operating) | Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave |
| Humidity (Operating) | 100-240 VAC ±10% at 50-60 ±10% Hz; 110-120 VAC ±10% at 400 ±5% Hz; Automatic AC Voltage Selection |
| Altitude (Operating) | 150 VA |
| Altitude (Non-Operating) | 0 °C to 50 °C |
| Random Vibration (Operating) | -30 °C to 70 °C |
| Random Vibration (Non-Operating) | 5% to 90% relative humidity (non-condensing) up to ≤ +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +50 °C. |
| Functional Shock | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
Size and Weight | |
| Dimensions (HWD) | Up to 10,000 ft. (3048 m) at or below +30 °C |
| Weight | Up to 40,000 ft. (12,192 m) |
WaveSurfer 4034HD スペックVertical - Analog Channels | |
| Analog Bandwidth (Max) | 350 MHz |
| Bandwidth | 10.74"H x 14.96"W x 6.30"D (273 mm x 380 mm x 160 mm) |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 350 MHz |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 350 MHz |
| Rise Time (10-90%, 50 Ω) | 1 ns |
| Input Channels | 4 |
| Input Channels | 11.7 lbs (5.3 kg) |
| Vertical Resolution | 13 bits; up to 15 bits with enhanced resolution (ERES) |
| Vertical Resolution | 20.06 lbs (9.1 kg) |
| Effective Number of Bits (ENOB) | 8.6 |
| Vertical Noise Floor (1 mV/div) | 70 uVrms |
| Vertical Noise Floor (2 mV/div) | 70 uVrms |
| Vertical Noise Floor (5 mV/div) | 70 uVrms |
| Vertical Noise Floor (10 mV/div) | 74 uVrms |
| Vertical Noise Floor (20 mV/div) | 94 uVrms |
| Vertical Noise Floor (50 mV/div) | 175 uVrms |
| Vertical Noise Floor (100 mV/div) | 291 uVrms |
| Vertical Noise Floor (200 mV/div) | 923 uVrms |
| Vertical Noise Floor (500 mV/div) | 1.73 mVrms |
| Vertical Noise Floor (1 V/div) | 2.89 mVrms |
| Sensitivity | 1 MΩ: 1 mV/div - 10 V/div, fully variable; 50 Ω: 1 mV/div - 1 V/div, fully variable |
| DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(0.5%) FS, offset at 0 V |
| Channel-Channel Isolation | 60 dB (For any two ProBus input channels, same v/div settings, typical) |
| Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div 1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 198 mV/div ±160 V @ 200 mV - 1 V/div ±400 V @ 1.02 V - 10 V/div |
| DC Vertical Offset Accuracy | ±(1.0% of offset setting + 0.5% FS + 0.02% of max offset + 1mV) |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz) |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Input Impedance | 50 Ω ± 2.0% or 1 MΩ || 15 pF |
| Bandwidth Limiters | 20MHz, 200MHz |
| Rescaling | Electrical: volts, amps |
Horizontal - Analog Channels | |
| Timebases | Internal timebase common to 4 input channels |
| Acquisition Modes | Real-time, Roll, Average, Sequence |
| Time/Division Range | 500 ps/div - 100 s/div Roll Mode available at ≥ 50 ms/div |
| Clock Accuracy | +/-2.5ppm + 1.0ppm/year from calibration |
| Channel-Channel Deskew Range | < 5us/div, ± 100 ns, each channel ≥ 5us/div, ± (Tdiv x 0.04), each channel |
Acquisition - Analog Channels | |
| Sample Rate | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 |
| Maximum Acquisition Memory | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
| Sample Rate (Single-shot) | 5 GS/s on 2 Ch 2.5 GS/s on 4 Ch |
| Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 12.5M / 25M (1,000) |
| Intersegment Time | 1 µs |
| Enhanced Resolution (ERES) | From 12.5 to 15 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
Vertical, Horizontal, Acquisition - Digital Channels | |
| Maximum Input Frequency | 125 MHz |
| Minimum Detectable Pulse Width | 4 ns |
| Input Channels | 16 Digital channels (with WS4KHD-MSO option) |
| Input Impedance (Flying Leads) | 100 kΩ || 5 pF |
| Input Dynamic Range | ±20V |
| Maximum Input Voltage | ±30V Peak |
| Maximum Input Voltage Swing | 500mVpp |
| Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 |
| Threshold Selections | TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined |
| Threshold Accuracy | ±(3% of threshold setting + 100mV) |
| User Defined Threshold Range | ±10V in 20 mV steps |
| Sample Rate | 500 MS/s |
| Record Length | 12.5 MS - 16 Channels |
| Channel-to-Channel Skew | ±(1 digital sample) |
Triggering System | |
| Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 350MHz |
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/5, AC Line |
| Coupling | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0-100% of memory size |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Hold-off | 10 ns up to 20s or from 1 to 100,000,000 |
| Trigger and Interpolator Jitter | ≤ 8 psrms (typical) |
| Internal Trigger Level Range | ±4.1 Divisions |
| External Trigger Level Range | Ext: ±0.61 V, EXT/5: ±3.05 V |
| Maximum Trigger Rate | ≤ 175,000 waveforms/second |
| Trigger Sensitivity with Edge Trigger ProBus Inputs | 0.9 division: DC - 10 MHz 1 division: 10 MHz - 200 MHz |
| Trigger Sensitivity with Edge Trigger (Aux Input) | Ext: 200 mV from DC to 10 MHz 300 mV from 10 MHz to 200 MHz Ext/5: 1 V from DC to 10 MHz 1.5 V from 10 MHz to 200 MHz |
Trigger Types | |
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| Width | Triggers on positive or negative glitches with selectable widths. minimum width 2 ns, Maximum Width: 20 s |
| Window | Triggers when signal exits a window defined by adjustable thresholds |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Interval | Triggers on intervals selectable between 1 ns and 20 s. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Multi-Stage: Qualified (Timeout or State/Edge Qualified) | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time. |
| Triggers with Exclusion Technology | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Low Speed Serial Protocol Trigger (Optional) | |
| Supported Protocols | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM) |
Math Tools | |
| Math Functionality | Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform. |
| Math Operators - Basic Math | Delay (from trigger, 50%), Duty Cycle, Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width- |
| Math Operators - Digital (incl. with MSO models/options) | Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top. |
| Math Operators - Filters | Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width- |
| Math Operators - Functions | Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. |
| Math Operators - Other | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Invert (negate), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+). |
Pass/Fail Testing | |
| Pass/Fail Testing | Enhanced resolution (to 15 bits vertical) |
Three-phase Electrical and Mechanical Motor Drive Analysis Software | |
| Setup Capability | FFT (power spectrum, magnitude), up to 500 kpts record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows. |
| Numerics Measurement Table Selections | Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity). |
| Per-cycle "Synthesized" Waveforms and Statistics | Trend (datalog) of up to 1000 measurement parameters |
| Harmonics Calculation Option (MDA800-HARMONICS) | Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook. |
Integrated Second Display | |
| Size | Color 12.1" widescreen capacitive touch screen |
| Resolution | 1200 x 800 |
LeCroy WaveStream™ Fast Viewing Mode | |
| Intensity | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Types | Auto, Single,X-Y, Single+X-Y |
| Number of Channels | Sample dots joined, or sample dots only |
High Speed Digitizer Output (Option) | |
| Type | Variable saturation levels; stores each trace’s persistence data in memory |
| Transfer Rate | Select analog or color |
| Output Protocol | Activate persistence on all traces |
| Control Protocol | Select from 1.00 s to infinity |
Calibration | |
| Auto Calibration | Display up to 8 Zooms |
| Calibration Stability | 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored on the internal microSD card or external USB device, limited only by the data storage media capacity |
Processor/CPU | |
| Type | Store to the internal microSD, over the network, or to a USB-connected peripheral device. |
| Processor Memory | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals |
| Operating System | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range |
| Oscilloscope Operating Software | Ensures specified DC and timing accuracy is maintained for 1 year minimum. |
| Real Time Clock | Calibration ensured within +/-5°C operating temperature. Manual calibration may be invoked if outside this temperature range. |
Connectivity | |
| Ethernet Port | TI AM5728 Sitara Processor |
| USB Host Ports | 2 GB |
| USB Device Port | Microsoft Windows CE |
| GPIB Port (optional) | Teledyne LeCroy MAUI™ |
| External Monitor Port | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
| Remote Control | Supports 10/100BaseT Ethernet interface (RJ45 port) |
| Network Communication Standard | 2 side USB 2.0 ports, 2 front USB 3.1 Gen 1 ports |
| LSIB Port (optional) | 1 port - USBTMC over USB 2.0 |
| Serial Port | Supports IEEE - 488.2 (External) |
| Peripheral Bus | 1 x HDMI, supports up to 1280x800 |
Auxiliary Input | |
| Signal Types | Via Windows Automation, or via LeCroy Remote Command Set |
| Coupling | VXI-11 or VICP, LXI Compatible |
Auxiliary Output | |
| Control Signals | Select External Trigger on the rear panel |
| Connector Type | 51 Ω: DC; 1 MΩ: DC |
Probes | |
| Probes | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz) |
| Probe System | Always Trig Out |
| Scale Factors | 3.3 V into 1 MΩ pulse > 1.3 ms |
| Calibration Output | Trigger out |
Power Requirements | |
| Voltage | BNC, located on back |
| Nominal Power Consumption | Qty. (4) ÷10 Passive Probes |
| Max. Power Consumption | ProBus. Automatically detects and supports a variety of compatible probes |
Environmental | |
| Temperature (Operating) | Automatically or manually selected depending on probe used |
| Temperature (Non-Operating) | Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave |
| Humidity (Operating) | 100-240 VAC ±10% at 50-60 ±10% Hz; 110-120 VAC ±10% at 400 ±5% Hz; Automatic AC Voltage Selection |
| Altitude (Operating) | 150 VA |
| Altitude (Non-Operating) | 0 °C to 50 °C |
| Random Vibration (Operating) | -30 °C to 70 °C |
| Random Vibration (Non-Operating) | 5% to 90% relative humidity (non-condensing) up to ≤ +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +50 °C. |
| Functional Shock | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
Size and Weight | |
| Dimensions (HWD) | Up to 10,000 ft. (3048 m) at or below +30 °C |
| Weight | Up to 40,000 ft. (12,192 m) |
WaveSurfer 4054HD スペックVertical - Analog Channels | |
| Analog Bandwidth (Max) | 500 MHz |
| Bandwidth | 10.74"H x 14.96"W x 6.30"D (273 mm x 380 mm x 160 mm) |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 500 MHz |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 500 MHz |
| Rise Time (10-90%, 50 Ω) | 700 ps |
| Input Channels | 4 |
| Input Channels | 11.7 lbs (5.3 kg) |
| Vertical Resolution | 14 bits; up to 15 bits with enhanced resolution (ERES) |
| Vertical Resolution | 20.06 lbs (9.1 kg) |
| Effective Number of Bits (ENOB) | 8.5 |
| Vertical Noise Floor (1 mV/div) | 88 uVrms |
| Vertical Noise Floor (2 mV/div) | 88 uVrms |
| Vertical Noise Floor (5 mV/div) | 88 uVrms |
| Vertical Noise Floor (10 mV/div) | 93 uVrms |
| Vertical Noise Floor (20 mV/div) | 116 uVrms |
| Vertical Noise Floor (50 mV/div) | 212 uVrms |
| Vertical Noise Floor (100 mV/div) | 352 uVrms |
| Vertical Noise Floor (200 mV/div) | 1.11 mVrms |
| Vertical Noise Floor (500 mV/div) | 2.10 mVrms |
| Vertical Noise Floor (1 V/div) | 3.51 mVrms |
| Sensitivity | 1 MΩ: 1 mV/div - 10 V/div, fully variable; 50 Ω: 1 mV/div - 1 V/div, fully variable |
| DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(0.5%) FS, offset at 0 V |
| Channel-Channel Isolation | DC - 200 MHz: 60 dB (>1000:1) 200 MHz - 500 MHz: 50 dB (>300:1) (For any two ProBus input channels, same v/div settings, typical) |
| Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div 1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 198 mV/div ±160 V @ 200 mV - 1 V/div ±400 V @ 1.02 V - 10 V/div |
| DC Vertical Offset Accuracy | ±(1.0% of offset setting + 0.5% FS + 0.02% of max offset + 1mV) |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz) |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Input Impedance | 50 Ω ± 2.0% or 1 MΩ || 15 pF |
| Bandwidth Limiters | 20MHz, 200MHz |
| Rescaling | Electrical: volts, amps |
Horizontal - Analog Channels | |
| Timebases | Internal timebase common to 4 input channels |
| Acquisition Modes | Real-time, Roll, Average, Sequence |
| Time/Division Range | 500 ps/div - 100 s/div Roll Mode available at ≥ 50 ms/div |
| Clock Accuracy | +/-2.5ppm + 1.0ppm/year from calibration |
| Channel-Channel Deskew Range | < 5us/div, ± 100 ns, each channel ≥ 5us/div, ± (Tdiv x 0.04), each channel |
Acquisition - Analog Channels | |
| Sample Rate | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 |
| Maximum Acquisition Memory | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
| Sample Rate (Single-shot) | 5 GS/s on 2 Ch 2.5 GS/s on 4 Ch |
| Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 12.5M / 25M (1,000) |
| Intersegment Time | 1 µs |
| Enhanced Resolution (ERES) | From 12.5 to 15 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
Vertical, Horizontal, Acquisition - Digital Channels | |
| Maximum Input Frequency | 125 MHz |
| Minimum Detectable Pulse Width | 4 ns |
| Input Channels | 16 Digital channels (with WS4KHD-MSO option) |
| Input Impedance (Flying Leads) | 100 kΩ || 5 pF |
| Input Dynamic Range | ±20V |
| Maximum Input Voltage | ±30V Peak |
| Maximum Input Voltage Swing | 500mVpp |
| Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 |
| Threshold Selections | TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined |
| Threshold Accuracy | ±(3% of threshold setting + 100mV) |
| User Defined Threshold Range | ±10V in 20 mV steps |
| Sample Rate | 500 MS/s |
| Record Length | 12.5 MS - 16 Channels |
| Channel-to-Channel Skew | ±(1 digital sample) |
Triggering System | |
| Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 500MHz |
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/5, AC Line |
| Coupling | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0-100% of memory size |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Hold-off | 10 ns up to 20s or from 1 to 100,000,000 |
| Trigger and Interpolator Jitter | ≤ 8 psrms (typical) |
| Internal Trigger Level Range | ±4.1 Divisions |
| External Trigger Level Range | Ext: ±0.61 V, EXT/5: ±3.05 V |
| Maximum Trigger Rate | ≤ 175,000 waveforms/second |
| Trigger Sensitivity with Edge Trigger ProBus Inputs | 0.9 division: DC - 10 MHz 1 division: 10 MHz - 200 MHz |
| Trigger Sensitivity with Edge Trigger (Aux Input) | Ext: 200 mV from DC to 10 MHz 300 mV from 10 MHz to 200 MHz Ext/5: 1 V from DC to 10 MHz 1.5 V from 10 MHz to 200 MHz |
Trigger Types | |
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| Width | Triggers on positive or negative glitches with selectable widths. minimum width 2 ns, Maximum Width: 20 s |
| Window | Triggers when signal exits a window defined by adjustable thresholds |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Interval | Triggers on intervals selectable between 1 ns and 20 s. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Multi-Stage: Qualified (Timeout or State/Edge Qualified) | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time. |
| Triggers with Exclusion Technology | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Low Speed Serial Protocol Trigger (Optional) | |
| Supported Protocols | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM) |
Math Tools | |
| Math Functionality | Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform. |
| Math Operators - Basic Math | Delay (from trigger, 50%), Duty Cycle, Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width- |
| Math Operators - Digital (incl. with MSO models/options) | Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top. |
| Math Operators - Filters | Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width- |
| Math Operators - Functions | Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. |
| Math Operators - Other | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Invert (negate), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+). |
Pass/Fail Testing | |
| Pass/Fail Testing | Enhanced resolution (to 15 bits vertical) |
Three-phase Electrical and Mechanical Motor Drive Analysis Software | |
| Setup Capability | FFT (power spectrum, magnitude), up to 500 kpts record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows. |
| Numerics Measurement Table Selections | Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity). |
| Per-cycle "Synthesized" Waveforms and Statistics | Trend (datalog) of up to 1000 measurement parameters |
| Harmonics Calculation Option (MDA800-HARMONICS) | Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook. |
Integrated Second Display | |
| Size | Color 12.1" widescreen capacitive touch screen |
| Resolution | 1200 x 800 |
LeCroy WaveStream™ Fast Viewing Mode | |
| Intensity | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Types | Auto, Single,X-Y, Single+X-Y |
| Number of Channels | Sample dots joined, or sample dots only |
High Speed Digitizer Output (Option) | |
| Type | Variable saturation levels; stores each trace’s persistence data in memory |
| Transfer Rate | Select analog or color |
| Output Protocol | Activate persistence on all traces |
| Control Protocol | Select from 1.00 s to infinity |
Calibration | |
| Auto Calibration | Display up to 8 Zooms |
| Calibration Stability | 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored on the internal microSD card or external USB device, limited only by the data storage media capacity |
Processor/CPU | |
| Type | Store to the internal microSD, over the network, or to a USB-connected peripheral device. |
| Processor Memory | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals |
| Operating System | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range |
| Oscilloscope Operating Software | Ensures specified DC and timing accuracy is maintained for 1 year minimum. |
| Real Time Clock | Calibration ensured within +/-5°C operating temperature. Manual calibration may be invoked if outside this temperature range. |
Connectivity | |
| Ethernet Port | TI AM5728 Sitara Processor |
| USB Host Ports | 2 GB |
| USB Device Port | Microsoft Windows CE |
| GPIB Port (optional) | Teledyne LeCroy MAUI™ |
| External Monitor Port | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
| Remote Control | Supports 10/100BaseT Ethernet interface (RJ45 port) |
| Network Communication Standard | 2 side USB 2.0 ports, 2 front USB 3.1 Gen 1 ports |
| LSIB Port (optional) | 1 port - USBTMC over USB 2.0 |
| Serial Port | Supports IEEE - 488.2 (External) |
| Peripheral Bus | 1 x HDMI, supports up to 1280x800 |
Auxiliary Input | |
| Signal Types | Via Windows Automation, or via LeCroy Remote Command Set |
| Coupling | VXI-11 or VICP, LXI Compatible |
Auxiliary Output | |
| Control Signals | Select External Trigger on the rear panel |
| Connector Type | 52 Ω: DC; 1 MΩ: DC |
Probes | |
| Probes | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz) |
| Probe System | Always Trig Out |
| Scale Factors | 3.3 V into 1 MΩ pulse > 1.3 ms |
| Calibration Output | Trigger out |
Power Requirements | |
| Voltage | BNC, located on back |
| Nominal Power Consumption | Qty. (4) ÷10 Passive Probes |
| Max. Power Consumption | ProBus. Automatically detects and supports a variety of compatible probes |
Environmental | |
| Temperature (Operating) | Automatically or manually selected depending on probe used |
| Temperature (Non-Operating) | Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave |
| Humidity (Operating) | 100-240 VAC ±10% at 50-60 ±10% Hz; 110-120 VAC ±10% at 400 ±5% Hz; Automatic AC Voltage Selection |
| Altitude (Operating) | 150 VA |
| Altitude (Non-Operating) | 0 °C to 50 °C |
| Random Vibration (Operating) | -30 °C to 70 °C |
| Random Vibration (Non-Operating) | 5% to 90% relative humidity (non-condensing) up to ≤ +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +50 °C. |
| Functional Shock | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
Size and Weight | |
| Dimensions (HWD) | Up to 10,000 ft. (3048 m) at or below +30 °C |
| Weight | Up to 40,000 ft. (12,192 m) |
WaveSurfer 4104HD スペックVertical - Analog Channels | |
| Analog Bandwidth (Max) | 1 GHz |
| Bandwidth | 10.74"H x 14.96"W x 6.30"D (273 mm x 380 mm x 160 mm) |
| Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 1 GHz |
| Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 500 MHz |
| Rise Time (10-90%, 50 Ω) | 450 ps |
| Input Channels | 4 |
| Input Channels | 11.7 lbs (5.3 kg) |
| Vertical Resolution | 15 bits; up to 15 bits with enhanced resolution (ERES) |
| Vertical Resolution | 20.06 lbs (9.1 kg) |
| Effective Number of Bits (ENOB) | 8.3 |
| Vertical Noise Floor (1 mV/div) | 125 uVrms |
| Vertical Noise Floor (2 mV/div) | 125 uVrms |
| Vertical Noise Floor (5 mV/div) | 125 uVrms |
| Vertical Noise Floor (10 mV/div) | 128 uVrms |
| Vertical Noise Floor (20 mV/div) | 161 uVrms |
| Vertical Noise Floor (50 mV/div) | 281 uVrms |
| Vertical Noise Floor (100 mV/div) | 465 uVrms |
| Vertical Noise Floor (200 mV/div) | 1.63 uVrms |
| Vertical Noise Floor (500 mV/div) | 2.73 mVrms |
| Vertical Noise Floor (1 V/div) | 4.68 mVrms |
| Sensitivity | 1 MΩ: 1 mV/div - 10 V/div, fully variable; 50 Ω: 1 mV/div - 1 V/div, fully variable |
| DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(0.5%) FS, offset at 0 V |
| Channel-Channel Isolation | DC - 200 MHz: 60 dB (>1000:1) 200 MHz - 500 MHz: 50 dB (>300:1) 500 MHz - 1 GHz: 40 dB (>100:1) (For any two ProBus input channels, same v/div settings, typical) |
| Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div 1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 198 mV/div ±160 V @ 200 mV - 1 V/div ±400 V @ 1.02 V - 10 V/div |
| DC Vertical Offset Accuracy | ±(1.0% of offset setting + 0.5% FS + 0.02% of max offset + 1mV) |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz) |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Input Impedance | 50 Ω ± 2.0% or 1 MΩ || 15 pF |
| Bandwidth Limiters | 20MHz, 200MHz |
| Rescaling | Electrical: volts, amps |
Horizontal - Analog Channels | |
| Timebases | Internal timebase common to 4 input channels |
| Acquisition Modes | Real-time, Roll, Average, Sequence |
| Time/Division Range | 500 ps/div - 100 s/div Roll Mode available at ≥ 50 ms/div |
| Clock Accuracy | +/-2.5ppm + 1.0ppm/year from calibration |
| Channel-Channel Deskew Range | < 5us/div, ± 100 ns, each channel ≥ 5us/div, ± (Tdiv x 0.04), each channel |
Acquisition - Analog Channels | |
| Sample Rate | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 |
| Maximum Acquisition Memory | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
| Sample Rate (Single-shot) | 5 GS/s on 2 Ch 2.5 GS/s on 4 Ch |
| Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 12.5M / 25M (1,000) |
| Intersegment Time | 1 µs |
| Enhanced Resolution (ERES) | From 12.5 to 15 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
Vertical, Horizontal, Acquisition - Digital Channels | |
| Maximum Input Frequency | 125 MHz |
| Minimum Detectable Pulse Width | 4 ns |
| Input Channels | 16 Digital channels (with WS4KHD-MSO option) |
| Input Impedance (Flying Leads) | 100 kΩ || 5 pF |
| Input Dynamic Range | ±20V |
| Maximum Input Voltage | ±30V Peak |
| Maximum Input Voltage Swing | 500mVpp |
| Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 |
| Threshold Selections | TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined |
| Threshold Accuracy | ±(3% of threshold setting + 100mV) |
| User Defined Threshold Range | ±10V in 20 mV steps |
| Sample Rate | 500 MS/s |
| Record Length | 12.5 MS - 16 Channels |
| Channel-to-Channel Skew | ±(1 digital sample) |
Triggering System | |
| Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 1GHz |
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/5, AC Line |
| Coupling | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0-100% of memory size |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Hold-off | 10 ns up to 20s or from 1 to 100,000,000 |
| Trigger and Interpolator Jitter | ≤ 8 psrms (typical) |
| Internal Trigger Level Range | ±4.1 Divisions |
| External Trigger Level Range | Ext: ±0.61 V, EXT/5: ±3.05 V |
| Maximum Trigger Rate | ≤ 175,000 waveforms/second |
| Trigger Sensitivity with Edge Trigger ProBus Inputs | 0.9 division: DC - 10 MHz 1 division: 10 MHz - 200 MHz |
| Trigger Sensitivity with Edge Trigger (Aux Input) | Ext: 200 mV from DC to 10 MHz 300 mV from 10 MHz to 200 MHz Ext/5: 1 V from DC to 10 MHz 1.5 V from 10 MHz to 200 MHz |
Trigger Types | |
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| Width | Triggers on positive or negative glitches with selectable widths. minimum width 2 ns, Maximum Width: 20 s |
| Window | Triggers when signal exits a window defined by adjustable thresholds |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Interval | Triggers on intervals selectable between 1 ns and 20 s. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Multi-Stage: Qualified (Timeout or State/Edge Qualified) | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time. |
| Triggers with Exclusion Technology | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Low Speed Serial Protocol Trigger (Optional) | |
| Supported Protocols | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM) |
Math Tools | |
| Math Functionality | Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform. |
| Math Operators - Basic Math | Delay (from trigger, 50%), Duty Cycle, Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width- |
| Math Operators - Digital (incl. with MSO models/options) | Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top. |
| Math Operators - Filters | Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width- |
| Math Operators - Functions | Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. |
| Math Operators - Other | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Invert (negate), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+). |
Pass/Fail Testing | |
| Pass/Fail Testing | Enhanced resolution (to 15 bits vertical) |
Three-phase Electrical and Mechanical Motor Drive Analysis Software | |
| Setup Capability | FFT (power spectrum, magnitude), up to 500 kpts record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows. |
| Numerics Measurement Table Selections | Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity). |
| Per-cycle "Synthesized" Waveforms and Statistics | Trend (datalog) of up to 1000 measurement parameters |
| Harmonics Calculation Option (MDA800-HARMONICS) | Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook. |
Integrated Second Display | |
| Size | Color 12.1" widescreen capacitive touch screen |
| Resolution | 1200 x 800 |
LeCroy WaveStream™ Fast Viewing Mode | |
| Intensity | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Types | Auto, Single,X-Y, Single+X-Y |
| Number of Channels | Sample dots joined, or sample dots only |
High Speed Digitizer Output (Option) | |
| Type | Variable saturation levels; stores each trace’s persistence data in memory |
| Transfer Rate | Select analog or color |
| Output Protocol | Activate persistence on all traces |
| Control Protocol | Select from 1.00 s to infinity |
Calibration | |
| Auto Calibration | Display up to 8 Zooms |
| Calibration Stability | 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored on the internal microSD card or external USB device, limited only by the data storage media capacity |
Processor/CPU | |
| Type | Store to the internal microSD, over the network, or to a USB-connected peripheral device. |
| Processor Memory | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals |
| Operating System | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range |
| Oscilloscope Operating Software | Ensures specified DC and timing accuracy is maintained for 1 year minimum. |
| Real Time Clock | Calibration ensured within +/-5°C operating temperature. Manual calibration may be invoked if outside this temperature range. |
Connectivity | |
| Ethernet Port | TI AM5728 Sitara Processor |
| USB Host Ports | 2 GB |
| USB Device Port | Microsoft Windows CE |
| GPIB Port (optional) | Teledyne LeCroy MAUI™ |
| External Monitor Port | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
| Remote Control | Supports 10/100BaseT Ethernet interface (RJ45 port) |
| Network Communication Standard | 2 side USB 2.0 ports, 2 front USB 3.1 Gen 1 ports |
| LSIB Port (optional) | 1 port - USBTMC over USB 2.0 |
| Serial Port | Supports IEEE - 488.2 (External) |
| Peripheral Bus | 1 x HDMI, supports up to 1280x800 |
Auxiliary Input | |
| Signal Types | Via Windows Automation, or via LeCroy Remote Command Set |
| Coupling | VXI-11 or VICP, LXI Compatible |
Auxiliary Output | |
| Control Signals | Select External Trigger on the rear panel |
| Connector Type | 53 Ω: DC; 1 MΩ: DC |
Probes | |
| Probes | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz) |
| Probe System | Always Trig Out |
| Scale Factors | 3.3 V into 1 MΩ pulse > 1.3 ms |
| Calibration Output | Trigger out |
Power Requirements | |
| Voltage | BNC, located on back |
| Nominal Power Consumption | Qty. (4) ÷10 Passive Probes |
| Max. Power Consumption | ProBus. Automatically detects and supports a variety of compatible probes |
Environmental | |
| Temperature (Operating) | Automatically or manually selected depending on probe used |
| Temperature (Non-Operating) | Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave |
| Humidity (Operating) | 100-240 VAC ±10% at 50-60 ±10% Hz; 110-120 VAC ±10% at 400 ±5% Hz; Automatic AC Voltage Selection |
| Altitude (Operating) | 150 VA |
| Altitude (Non-Operating) | 0 °C to 50 °C |
| Random Vibration (Operating) | -30 °C to 70 °C |
| Random Vibration (Non-Operating) | 5% to 90% relative humidity (non-condensing) up to ≤ +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +50 °C. |
| Functional Shock | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
Size and Weight | |
| Dimensions (HWD) | Up to 10,000 ft. (3048 m) at or below +30 °C |
| Weight | Up to 40,000 ft. (12,192 m) |
デモビデオ
|
主な特徴
- 12ビットADC分解能
- 分解能向上演算（ERES）使用時に最大15ビット
- 最小ノイズフロア：65μVrms @1mV/div(200MHz)
- DCゲイン精度：±0.5%フルスケール
- チャンネル間アイソレーション： 1000：1(60dB)
- 周波数帯域：200MHz、350MHz、500MHz、1GHz
- サンプリング速度：2.5GS/s（インターリーブ時：5GS/s）
- メモリ長：標準：12.5Mポイント/[email protected] （インターリーブ時：25Mポイント/[email protected]）
- オフセット電圧：最高±400V
- タブレット感覚のワンタッチ操作 OneTouch MAUI（ワンタッチマウイ）搭載
- デジタル16ch（ミックスド・シグナル・オプション）
- 12.1インチ･タッチ・スクリーン・ディスプレイ
- 幅広いプローブへの対応
- 高機能な解析／レポート用ツールセット
HD4096 高精細テクノロジ
HD4096高精細テクノロジは、従来のオシロスコープ（8ビット:1/256） と比較して16倍（12ビット:1/4096）の高い電圧分解能を実現し、最高1GHzの帯域までカバーします。
HD4096 高精細テクノロジのメリット
HD4096高精細テクノロジは、より正確かつ鮮明に波形を捉えることができます。従来のオシロスコープではノイズに埋もれて識別が困難になりがちな微小信号や、高電圧に埋もれてしまう微小なノイズに対してもHDO4096高精細テクノロジは正確にその波形を把握することができます。このような高い測定精度と高ダイナミックレンジにより、デバッグ・解析・分析などの様々な用途に対して多大なるメリットをもたらします。
信号の細部まで表示
ローノイズ・フロントエンドと16倍高い電圧分解能により、従来では ノイズなどの影響で観測できなかった信号をより精細に捕捉できます。
タブレット感覚の操作性
OneTouch MAUI（ワンタッチマウイ）搭載により、他のオシロスコープにない独自のタッチ操作でオシロスコープの操作性を刷新します。タブレット等で一般的なジェスチャを採用することで直感的な操作が可能になり設定時間が劇的に短くなります。全ての一般的な操作がポップアップ・メニューや設定メニューを開かなくともワンタッチ操作で行えます。
- タッチ操作に特化した設計
独自のタッチスクリーン機能を用いることで、タブレットのように操作することができます。
- 簡素な実装
便利なショートカットや直感的なメニューにより設定が簡潔に行えます。
- 問題解決のために
デバッグの際には多種の解析ツールの操作をサポートして迅速に問題を解決します。
30種類以上の豊富なプローブラインナップ
高電圧パッシブプローブ、高電圧差動プローブ、電流プローブ、広帯域差動プローブ、アクティブプローブ、光アイソレーション・プローブ、 ロゴスキーコイル電流プローブ、電源レールプローブ、テクトロニクス社TekProbe用アダプタなどのプローブに対応
先進の解析機能（Measure & Math）
自動測定パラメータ（6個）と演算機能（2個）により詳細分析・測定が可能になりました。
ヒストリ・モード（波形再生）
過去に起きた現象を簡単に呼び出す事ができます。また、呼び出した波形にカーソルや測定パラメータを使って、問題の原因をすばやく特定することができます。
WaveScan高機能波形検索ツール
オシロスコープで捕捉したアナログ・デジタルの波形から異常現象を素早く抽出する事ができます。ラント・グリッチ・メジャーなどのパラメータを用いて解析する事ができます。
作業内容の保存とレポート作成ができるLabNotebook
LabNotebookは通常の画像保存機能を更に強化したユニークなツールです。画面コピー、シリアルナンバー、タイムスタンプ、コメント、タイトル、オシロスコープの設定条件などをレポートファイルとして出力することができます。また、PDFだけではなく波形データ・設定データも同時に保存しており、FlashBack機能で後から「その瞬間」に簡単に戻ることができます。
低速シリアルバス・デコード＆トリガオプション
アドレスやデータでの条件トリガや、プロトコル検索機能で目的のメッセージを探し出すことができます。波形上に色分けされてデコード表示されるため、プロトコル構造を一目で理解することができます。I2C、SPI、UART-RS232、CAN、CAN FD、LIN、FlexRay、AudioBusをサポートしています。
パワー・デバイス解析オプション
スイッチング電源解析オプションを使って、電源やパワーデバイスの動作特性をすばやく測定・解析することができます。ダイナミックレンジの不足により、近似式を使って計測していた導通損失が12ビット高分解能により捕捉された電圧波形と電流波形の掛け算により直接計測が可能です。
ファンクション・ジェネレータ・オプション（25MHz、1ch）
25 MHz、125 MS/s、1チャンネルを内蔵可能で、本体の操作画面の専用メニューで設定が行えます。
スペクトラム・アナライザ・オプション
オプションでスペクトラム・アナライザ（高分解能FFT機能）を追加する事ができます。ピークサーチ・ピークリスト表示にも対応します。
クリックで詳細表示されます
クリックで詳細表示されます
光アイソレーション・プローブ
プローブ・アダプタ
電源レール・プローブ
アクティブ・プローブ
電流プローブ
差動プローブ
高電圧差動プローブ
高電圧プローブ
パッシブ・プローブ
他社比較
| モデル名 | テレダイン・ レクロイ |
テクトロ ニクス |
キーサイト |
|---|---|---|---|
| WaveSurfer 4000HD | 4シリーズMSO | InfiniiVision 4000 X | |
| 詳細比較資料 ダウンロード |
─ |  |
|
| 帯域幅 | 200MHz~1GHz | 100 MHz - 1 GHz | 200MHz~1.5GHz |
| アナログ・チャンネル数 | 4ch | 4ch | 4ch |
| デジタル(MSO)・ チャンネル数 |
16ch (オプション） |
16ch (オプション） |
16ch (MSOorオプション） |
| 垂直分解能 | 12ビット | 8ビット/12ビット | 8ビット |
| 最高サンプリング速度 (インターリーブ時） |
2.5GS/s (5GS/s) |
12ビット：3.125GS/s 8ビット：6.25GS/s |
2.5GS/s (5GS/s) |
| 標準メモリ量 (インターリーブ時） |
12.5M(25M) | 31.25M | 2M(4M) |
| DCゲイン精度 （>5 mV/div、 /フルスケール） |
±0.5% | ±1.0% | ±2.0% |
| ベースラインノイズ (1 GHzモデル、 100 mV/div) |
465μV | 1,620μV | ー |
| オフセット・レンジ | 最大±400V | 最大±100V | 最大±75 V |
| ディスプレイ・ サイズ(分解能) |
12.1インチ （1280×800) |
13.3インチ （1,920×1,080） |
12.1インチ （800×600) |
| タッチパネル操作 | 〇 | 〇 | 〇 |
| 重量 | 5.3kg | 7.6kg | 6.3kg |
- 製品カタログ
- ダイジェストカタログ
-
高分解能オシロスコープ
性能比較表 - オシロスコープ機能、オプション、アクセサリ・カタログ
- マニュアル(日本語)
- マニュアル(英文)
- デモビデオ
-
ソフトウエア
ファームウエア
ユーティリティ・ソフトウエア - サンプル・プログラム
- 問い合わせ窓口
- 販売窓口
- デモのリクエスト
