FRVS Bluetooth RF Test System

Request a Quote
FRVS Test Platform Components
Key Features and Benefits


FRVS is recognized by the Bluetooth SIG as a validated test system for qualification testing of products to Bluetooth BR/EDR and low energy RF test specifications.

At the core of the system is the Teledyne LeCroy TLF3000 RF Tester which can test all the test cases up to 6GHz in the specification. (To perform blocking performance test cases which go up to 12.75GHz, an external CW generator is used).

FRVS Test Platform Components

The FRVS system is a highly portable and flexible qualification testing solution that, due to its unique parallel architecture, can execute testing much faster than traditional RF test systems. This compact yet powerful system is significantly smaller than comparable solutions, and can easily be accommodated on the test bench.


The FRVS Test System's main components include Windows Host PC, TLF3000 Hardware unit, FRVS validated test software, external CW generator and 2-way RF combiner.

The user configures the software for DUT connection and parameters from ICS/IXIT to enable test case selection. DUT properties are verified at the start of each test, and if incompatible, a test will not be run.


Test results are displayed in real-time and can be reviewed after each test run. Test results can be exported into a PDF report for full breakdown of parametrized results for individual tests.


FRVS Bluetooth Test System supports the following features:


The FRVS test system provides access to test cases as shown below:


Key Features and Benefits

  • Recognized by Bluetooth SIG as a validated test system for Bluetooth BR/EDR and Low Energy RF Test Specifications
  • Fast - 2 second boot time, and the in-band emissions test completes in 2.5 ms
  • Recognized by Bluetooth SIG as a validated test system for Bluetooth BR/EDR and Low Energy RF Test Specifications
  • Fully automated test bench solution with unrivalled speed of test
  • Support for all category A and B tests listed in Bluetooth SIG TCRL
  • Test case coverage includes: Transmitter and Receiver tests for 1M, 2M, 3M and LE coded, Stable Modulation and 1/3/5-slot packets
  • Pre-compliance to AoA and AoD test cases
  • Automated compensation across 2.4GHz band for cable loss
  • Detailed test reports created automatically for Bluetooth SIG submission
  • Ability to run all tests for formal qualification or a selected subset of tests for pre-compliance confidence
  • Graceful recovery and continuation of testing in the case of DUT failure or connection issues
  • Compact, powerful and portable


Name Type
FRVS Bluetooth RF Test System Datasheet Download PDF


Download PDF
Quick Start Guide Download PDF

Start Guide

Download PDF
Frontline FRVS Bluetooth® RF Test System (v2.10 GA) Download PDF

User Manual

Download PDF
Supported Host OS

Windows 10, 11

Host Interfaces

USB - Connector type: Micro-USB
- Speed Rating: High Speed
- VBUS Load: 2.2 µF, > 10 kΩ
- Connector type: RJ45
- Speed: 10 / 100 / 1000

Input Power

- Connector type: 2.5 mm jack
- Input voltage: 12 V DC
- Power: 10 W typical (application dependent)
- Reverse polarity protection: Yes
- Over voltage protection: Yes
- Under voltage protection: Yes


158.5 mm x 160.0 mm x 47.0 mm (6.3” X 1.9” X 6.3” )


1.3 kg (2.87 lb)

Operating Temperature

0°C to 40°C


0% - 90% (0 °C – 35 °C), noncondensing

Got a Question?

We’re here to help and answer any question you might have.
We look forward to hearing from you