* 販売終了しました。

SDA 7Zi-Aシリーズ

SDA 7Zi-Aシリーズ、シリアル･データ･アナライザはWavePro 7Zi-Aシリーズ･オシロスコープをベースとしてシリアル･データ･インタフェースの解析用ツールSDA Ⅱを標準搭載した専用モデルです。従来からのレクロイ独自の機能である、アイパターン、TIE、バスタブ･カーブ、ジッタヒストグラムの4解析結果同時表示と相まって、強力なシリアル・データ解析を実現します。また、オプションでイーサネット、USB、PCI Express Gen1、SerialATA、UWBとHDMIのコンプライアンス試験に対応しています。


  • 　
  • 　
  • 　
基本仕様
モデル名 帯域 サンプリング速度(4ch時/2ch時) 標準メモリ(4ch時/2ch時)
SDA 725Zi-A

販売終了

 2.5 GHz 20/40 GS/s 32/64 Mポイント
SDA 735Zi-A

販売終了

 3.5 GHz 20/40 GS/s 32/64  Mポイント
SDA 740Zi-A

販売終了

 4 GHz 20/40 GS/s 32/64  Mポイント
SDA 760Zi-A

販売終了

 6 GHz 20/40 GS/s 32/64  Mポイント

モデルごとスペック詳細（モデル名をクリックで詳細表示されます） 

SDA 725Zi-A　スペック

Vertical System
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) 2.5 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) 500 MHz (typical) (≥5 mV/div)
Rise Time (10–90%) 150 ps (typical, flatness mode)
Rise Time (20–80%) 176 ps (typical, flatness mode)
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz, 1 GHz
Input Impedance 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input Coupling ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage 50 Ω: ±5 Vrms
1 MΩ: 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel Isolation DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable
DC Gain Accuracy ±1.5% of full scale
Offset Range 50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div
Offset Accuracy ±(1.5% of full scale + 1.0% of offset value + 1 mV)
　

Horizontal System
Timebases Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy < 1 ppm + (aging of 0.5ppm/yr from last calibration)
Time Interval Accuracy < 0.06 / SR + (clock accuracy* Reading) (rms)
Jitter Noise Floor 1.0 ps (TIE, typical)
Trigger and Interpolator Jitter 2 psrms (typical) <0.1 ps rms (typical, software assisted)
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input) 10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output) 10 MHz; 50 Ω impedance, output at the rear
External Clock 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input
　

Acquisition System
Single-Shot Sample Rate/Ch 40 GS/s on 2 Ch
20 GS/s on 4 Ch
Random Interleaved Sampling (RIS) 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time 1 µs
Memory Options (4 Ch / 2 Ch / 1Ch) M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 32 M / 64M / 64M
(5000)
　

Acquisition Processing
Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x
　

Triggering System
Modes Normal, Auto, Single, and Stop
Sources Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode DC, AC, HFRej, LFRej
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range ±4.1 div from center
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs 2 div @ < 2.5 GHz
1.5 div @ < 1.25 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
External Trigger Sensitivity, (Edge Trigger) 2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
External Trigger Input Range Aux (±0.4 V); Aux/10 (±4 V)
Max. Trigger Frequency, SMART Trigger 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 300 ps)
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
　

SMART Triggers with Exclusion Technology
Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern) Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
　

Cascade (Sequence) Triggering
Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
Types A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog).
Holdoff Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events
Reset Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events
　

High Speed Serial Protocol Triggering
Data Rates 100 Mb/s - 1.25 Gb/s
Pattern Length 80 bits, NRZ or 8b10b
Clock and Data Outputs 400mVp-p (typical) AC coupled
Clock Recovery Jitter 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BW PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
　

Color Waveform Display
Type Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution WXGA; 1280 x 768 pixels.
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation Sample dots joined, or sample dots only
　

Processor/CPU
Type Intel® CoreTM 2 Quad, 3 GHz (or better)
Processor Memory 8 GB standard
Operating System Microsoft Windows® Vista Business Edition (64-bit) with SP1
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
　

Setup Storage
Front Panel and Instrument Status Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Class C (v 1.2) Compliant
GPIB Port (optional) Supports IEEE – 488.2
LSIB Port (optional) Supports PCIe Gen1 x4 protocol with LeCroy supplied API
Ethernet Port Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Ports minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other
Peripheral Bus LeCroy LBUS standard
　

Auxiliary Output
Connector Type BNC, located on front
Signal Types Select from calibrator, control signals or Off
Output Signal 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ)
Control Signals Trigger enabled, trigger out, pass/fail status, off
　

Power Requirements
Voltage 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection;
Max. Power Consumption 850 W/850 VA
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C including CD-RW/DVD-ROM drive
Temperature (Non-Operating) –20 °C to +60 °C
Humidity (Operating) 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating) 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating) Up to 40,000 ft. (12,192 m)
Random Vibration (Operating) 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Random Vibration (Non-Operating) 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Functional Shock 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
　

Physical Dimensions
Dimensions (HWD) 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight 40.5 lbs. (18.5 kg)
Shipping Weight 58.5 lbs. (26.5 kg)
　

Certifications
Certifications CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
　
SDA 735Zi-A　スペック

Vertical System
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) 3.5 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) 500 MHz (typical) (≥5 mV/div)
Rise Time (10–90%) 120ps (typical, flatness mode)
Rise Time (20–80%) 113 ps (typical, flatness mode)
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz, 1 GHz, 3 GHz
Input Impedance 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input Coupling ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage 50 Ω: ±5 Vrms
1 MΩ: 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel Isolation DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable
DC Gain Accuracy ±1.5% of full scale
Offset Range 50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div
Offset Accuracy ±(1.5% of full scale + 1.0% of offset value + 1 mV)
　

Horizontal System
Timebases Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy < 1 ppm + (aging of 0.5ppm/yr from last calibration)
Time Interval Accuracy < 0.06 / SR + (clock accuracy* Reading) (rms)
Jitter Noise Floor 800 fs (TIE, typical)
Trigger and Interpolator Jitter 2 psrms (typical) <0.1 ps rms (typical, software assisted)
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input) 10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output) 10 MHz; 50 Ω impedance, output at the rear
External Clock 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input
　

Acquisition System
Single-Shot Sample Rate/Ch 40 GS/s on 2 Ch
20 GS/s on 4 Ch
Random Interleaved Sampling (RIS) 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time 1 µs
Memory Options (4 Ch / 2 Ch / 1Ch) M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 32M / 64M / 64M
(5000)
　

Acquisition Processing
Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x
　

Triggering System
Modes Normal, Auto, Single, and Stop
Sources Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode DC, AC, HFRej, LFRej
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range ±4.1 div from center
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs 2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
External Trigger Sensitivity, (Edge Trigger) 2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
External Trigger Input Range Aux (±0.4 V); Aux/10 (±4 V)
Max. Trigger Frequency, SMART Trigger 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 250 ps)
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
　

SMART Triggers with Exclusion Technology
Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern) Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
　

Cascade (Sequence) Triggering
Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
Types A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog).
Holdoff Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events
Reset Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events
　

High Speed Serial Protocol Triggering
Data Rates 100 Mb/s - 1.25 Gb/s
Pattern Length 80 bits, NRZ or 8b10b
Clock and Data Outputs 400mVp-p (typical) AC coupled
Clock Recovery Jitter 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BW PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
　

Color Waveform Display
Type Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution WXGA; 1280 x 768 pixels.
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation Sample dots joined, or sample dots only
　

Processor/CPU
Type Intel® CoreTM 2 Quad, 3 GHz (or better)
Processor Memory 8 GB standard
Operating System Microsoft Windows® Vista Business Edition (64-bit) with SP1
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
　

Setup Storage
Front Panel and Instrument Status Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Class C (v 1.2) Compliant
GPIB Port (optional) Supports IEEE – 488.2
LSIB Port (optional) Supports PCIe Gen1 x4 protocol with LeCroy supplied API
Ethernet Port Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Ports minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other
Peripheral Bus LeCroy LBUS standard
　

Auxiliary Output
Connector Type BNC, located on front
Signal Types Select from calibrator, control signals or Off
Output Signal 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ)
Control Signals Trigger enabled, trigger out, pass/fail status, off
　

Power Requirements
Voltage 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection;
Max. Power Consumption 850 W/850 VA
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C including CD-RW/DVD-ROM drive
Temperature (Non-Operating) –20 °C to +60 °C
Humidity (Operating) 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating) 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating) Up to 40,000 ft. (12,192 m)
Random Vibration (Operating) 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Random Vibration (Non-Operating) 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Functional Shock 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
　

Physical Dimensions
Dimensions (HWD) 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight 40.5 lbs. (18.5 kg)
Shipping Weight 58.5 lbs. (26.5 kg)
　

Certifications
Certifications CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
　
SDA 740Zi-A　スペック

Vertical System
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB) 4 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) 3.5 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) 500 MHz (typical) (≥5 mV/div)
Rise Time (10–90%) 105 ps (typical, flatness mode)
Rise Time (20–80%) 90ps (typical, flatness mode)
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz, 1 GHz, 3 GHz
Input Impedance 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input Coupling ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage 50 Ω (ProBus): ±5 Vrms
50 Ω (ProLink): ±4 Vpeak
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel Isolation DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable
DC Gain Accuracy ±1.5% of full scale
Offset Range 50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div
Offset Accuracy ±(1.5% of full scale + 1.0% of offset value + 1 mV)
　

Horizontal System
Timebases Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy < 1 ppm + (aging of 0.5ppm/yr from last calibration)
Time Interval Accuracy < 0.06 / SR + (clock accuracy* Reading) (rms)
Jitter Noise Floor 750 fs (TIE, typical)
Trigger and Interpolator Jitter 1 psrms (typical) <0.1 ps rms (typical, software assisted)
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input) 10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output) 10 MHz; 50 Ω impedance, output at the rear
External Clock 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input
　

Acquisition System
Single-Shot Sample Rate/Ch 40 GS/s on 2 Ch
20 GS/s on 4 Ch
Random Interleaved Sampling (RIS) 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time 1 µs
Memory Options (4 Ch / 2 Ch / 1Ch) M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 32M / 64M / 64M
(5000)
　

Acquisition Processing
Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x
　

Triggering System
Modes Normal, Auto, Single, and Stop
Sources Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode DC, AC, HFRej, LFRej
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range ±4.1 div from center
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs 2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs 2 div @ < 4 GHz
1.5 div @ < 2 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
External Trigger Sensitivity, (Edge Trigger) 2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
External Trigger Input Range Aux (±0.4 V); Aux/10 (±4 V)
Max. Trigger Frequency, SMART Trigger 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
　

SMART Triggers with Exclusion Technology
Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern) Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
　

Cascade (Sequence) Triggering
Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
Types A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog).
Holdoff Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events
Reset Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events
　

High Speed Serial Protocol Triggering
Data Rates 100 Mb/s - 2.7, 3.0, 3.125 Gb/s
Pattern Length 80 bits, NRZ or 8b10b
Clock and Data Outputs 400mVp-p (typical) AC coupled
Clock Recovery Jitter 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BW PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
　

Color Waveform Display
Type Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution WXGA; 1280 x 768 pixels.
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation Sample dots joined, or sample dots only
　

Processor/CPU
Type Intel® CoreTM 2 Quad, 3 GHz (or better)
Processor Memory 8 GB standard
Operating System Microsoft Windows® Vista Business Edition (64-bit) with SP1
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
　

Setup Storage
Front Panel and Instrument Status Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Class C (v 1.2) Compliant
GPIB Port (optional) Supports IEEE – 488.2
LSIB Port (optional) Supports PCIe Gen1 x4 protocol with LeCroy supplied API
Ethernet Port Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Ports minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other
Peripheral Bus LeCroy LBUS standard
　

Auxiliary Output
Connector Type BNC, located on front
Signal Types Select from calibrator, control signals or Off
Output Signal 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ)
Control Signals Trigger enabled, trigger out, pass/fail status, off
　

Power Requirements
Voltage 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection;
Max. Power Consumption 850 W/850 VA
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C including CD-RW/DVD-ROM drive
Temperature (Non-Operating) –20 °C to +60 °C
Humidity (Operating) 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating) 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating) Up to 40,000 ft. (12,192 m)
Random Vibration (Operating) 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Random Vibration (Non-Operating) 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Functional Shock 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
　

Physical Dimensions
Dimensions (HWD) 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight 40.5 lbs. (18.5 kg)
Shipping Weight 58.5 lbs. (26.5 kg)
　

Certifications
Certifications CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
　
SDA 760Zi-A　スペック

Vertical System
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB) 6 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) 3.5 GHz (≥10 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) 500 MHz (typical) (≥5 mV/div)
Rise Time (10–90%) 70 ps (typical, flatness mode)
Rise Time (20–80%) 79 ps (typical, flatness mode)
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz, 1 GHz, 3 GHz, 4 GHz
Input Impedance 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input Coupling ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage 50 Ω (ProBus): ±5 Vrms
50 Ω (ProLink): ±4 Vpeak
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel Isolation DC to 2 GHz: 46 dB (>200:1 VSWR)
2 to 4 GHz: 34 dB (>50:1 VSWR)
4 to 6 GHz: 26 dB (>20:1 VSWR)
(For any two ProLink input channels, same v/div settings, typical)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable
DC Gain Accuracy ±1.5% of full scale
Offset Range 50 Ω (ProBus):
±750 mV @ 10–170 mV/div
±4 V @ 172 mV/div -1 V/div
1 MΩ:
±1V @ 2–128 mV/div
±10V @ 130mV-1.28V/div
±100V @ 1.3V-10V/div
Offset Accuracy ±(1.5% of full scale + 1.0% of offset value + 1 mV)
　

Horizontal System
Timebases Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div)
Clock Accuracy < 1 ppm + (aging of 0.5ppm/yr from last calibration)
Time Interval Accuracy < 0.06 / SR + (clock accuracy* Reading) (rms)
Jitter Noise Floor 560 fs (TIE, typical)
Trigger and Interpolator Jitter 1 psrms (typical) <0.1 ps rms (typical, software assisted)
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input) 10 MHz; 50 Ω impedance, applied at the rear input
External Timebase Reference (Output) 10 MHz; 50 Ω impedance, output at the rear
External Clock 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input
　

Acquisition System
Single-Shot Sample Rate/Ch 40 GS/s on 2 Ch
20 GS/s on 4 Ch
Random Interleaved Sampling (RIS) 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time 1 µs
Memory Options (4 Ch / 2 Ch / 1Ch) M-64 Option:
64M / 128M / 128M
(15,000)
L-128 Option:
128M / 256M / 256M
(15,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 32M / 64M / 64M
(5000)
　

Acquisition Processing
Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x
　

Triggering System
Modes Normal, Auto, Single, and Stop
Sources Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode DC, AC, HFRej, LFRej
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range ±4.1 div from center
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs 2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs 2 div @ < 6 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
External Trigger Sensitivity, (Edge Trigger) 2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
External Trigger Input Range Aux (±0.4 V); Aux/10 (±4 V)
Max. Trigger Frequency, SMART Trigger 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
　

SMART Triggers with Exclusion Technology
Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern) Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
　

Cascade (Sequence) Triggering
Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
Types A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog).
Holdoff Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events
Reset Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events
　

High Speed Serial Protocol Triggering
Data Rates 100 Mb/s - 2.7, 3.0, 3.125 Gb/s
Pattern Length 80 bits, NRZ or 8b10b
Clock and Data Outputs 400mVp-p (typical) AC coupled
Clock Recovery Jitter 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BW PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
　

Color Waveform Display
Type Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution WXGA; 1280 x 768 pixels.
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation Sample dots joined, or sample dots only
　

Processor/CPU
Type Intel® CoreTM 2 Quad, 3 GHz (or better)
Processor Memory 8 GB standard
Operating System Microsoft Windows® Vista Business Edition (64-bit) with SP1
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
　

Setup Storage
Front Panel and Instrument Status Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Class C (v 1.2) Compliant
GPIB Port (optional) Supports IEEE – 488.2
LSIB Port (optional) Supports PCIe Gen1 x4 protocol with LeCroy supplied API
Ethernet Port Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Ports minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
External Monitor Port 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other
Peripheral Bus LeCroy LBUS standard
　

Auxiliary Output
Connector Type BNC, located on front
Signal Types Select from calibrator, control signals or Off
Output Signal 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ)
Control Signals Trigger enabled, trigger out, pass/fail status, off
　

Power Requirements
Voltage 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection;
Max. Power Consumption 850 W/850 VA
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C including CD-RW/DVD-ROM drive
Temperature (Non-Operating) –20 °C to +60 °C
Humidity (Operating) 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating) 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating) Up to 40,000 ft. (12,192 m)
Random Vibration (Operating) 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Random Vibration (Non-Operating) 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
Functional Shock 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
　

Physical Dimensions
Dimensions (HWD) 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm)
Weight 40.5 lbs. (18.5 kg)
Shipping Weight 58.5 lbs. (26.5 kg)
　

Certifications
Certifications CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
　
上位モデル
　 上位モデル
　
モデル名 SDA 8Zi
帯域 4～30GHz
サンプリング速度 40～80GS/s
標準メモリ 32～64Mポイント/ch
　 詳細

7Ziシリーズ　スペック詳細 （PDF:700K）

ページトップへ  

  • 帯域：2.5GHz、3.5GHz、4GHz、6GHz
  • 標準メモリ：32Mポイント@4ch／64Mポイント@2ch
  • 80ビット シリアル・パターン・トリガ（標準装備)
  • シリアルデータ解析機能SDA Ⅱ
    　・ EYEパターン解析機能
    　・ 3種類のジッタ・ブレイクダウン・アルゴリズム
    　・ ケーブル・デエンベデッド
  • PJブレー クダウン、ISIプロット
シリアル・データ解析のためのトータル・ソリューション
SDA 7Zi-Aシリーズの強力なシリアル･データ解析機能SDA Ⅱは、コンプライアン ス・テストによる合否判定だけではなく、特性分析・検証やテストに外れた 際の原因究明に威力を発揮します。SDAの4分割サマリー・ビューには、常にアイ・パターン、TIE、バスタ ブ・カーブ、ジッタ・ヒストグラムが表示されます。これら4種類の測定を同時に操作してリアルタイムに表示で きるオシロスコープはレクロイだけです。業界最速の解析エンジンXStream IIによって、高速アップデートと高速のアイ・パターン解析が実現されます。業界最速のアイ・パターン 描画と、最大限の単位間隔（UI）は、解析時間の最小化につながります。高速シリアル・パターン・トリガでは、最長80ビット、2.7Gb/sのシリア ル･パターンに対してパターン・トリガをかけることができます。ジッタ計算は統計値に基づいて行われおり、 最高水準のロング･メモリ性能（最高256Mポイント/ch）とX-Stream IIによる高い応答性により、 ジッタ・ブレイクダウンは瞬時に実行されます。
コンプライアンス・テストの自動化
QualiPHYコンプライアンス・テスト･パッケージでは、分かりやすいステップに従って、 広範なシリアル･データ規格に関するコンプライアンス・テストを実施することができます。 自動化された高速処理、イラスト入りの説明、接続ダイアグラムによって、テスト・プロセスが簡素化されます。 不合格時停止オプション付きの完全なテスト･レポート機能が用意されています。 この機能では、デバッグ処理中に不合格の箇所からテストを再開できます。 SDAシリーズにはアイ･パターンのエラーや、コンプライアンス・テストのエラーに対して、デバッグを行うために、 ジッタ・ブレイクダウン、8b/10bデコード、マスク違反ロケータ、ISIプロット、拡散スペクトル・ クロック解析などの高度な解析機能機能が用意されています。ケーブル負荷効果の除去機能 (ケーブル・ディエンベディッド)は、特定の種類のケーブルにSパラメータを挿入することで、 ケーブルの負荷効果を低減することができ、真の立ち上がり時間や振幅が測定できます。 また、このケーブル・ディエンベディッドに対して全ての解析機能を利用することができるため、不具合時の解析に威力を発揮します。

ページトップへ

Trigger Scan ケーブル・ディエンベディッド
測定系に含まれるケーブルの負荷効果を低減することができます。ケーブルのS-パラメータを入力するだけで利用できる上に、SDA 7Zi-Aシリーズの全ての解析ツールを利用することができます。
外部転送用インタフェースに LSIB（PCI ExpressCable）を採用！
PCI Express Cableを外部転送インタフェースとして採用することにより、従来比で数十倍～数百倍の250MB/secものデータ転送スピードを実現しました（LSIBオプションが必要）。これにより、高エネルギー物理関連の大規模実験施設や物理・化学関連の実験効率を飛躍的に高めることができます。
シリアル・パターン・トリガ
SDA 7Zi-Aシリーズには、80ビットのパターン･トリガが標準装備されています。SDA 760ZiとSDA 740Ziには最高2.7 Gb/s、SDA 735ZiとSDA 725Ziには最高1.25 Gb/sの高速パターン･トリガ･オプションが搭載されています。これら2種類のパターン･トリガは、リカバリ･クロックとデータが出力することができます。
8b/10bデコーダ
レクロイの強力8b/10bデコーダは、8b/10bの信号のデコードとイベント検索をサポートしています。また、デコード機能はSAS, SATA , PCI-Express, XAUI,ユーザ定義の5種類プロトコルデコードに対応しており、ユーザ独自の定義ファイルでデコードすることもできます。マルチレーン解析に対応しており、最高4chを同時にデコードすることができます。
SSC解析機能
レクロイ独自の長い捕捉メモリと高速サンプリング･レートは、拡散スペクトル･クロック（SSC）で転送されたデータ内の詳細情報を表示するのに最適です。今日の設計でSSCが使用される理由は、その低い変調周波数とノイズ低減効果にあります。波形メモリ全体にすばやくアクセスして、変調効果を確認することができます。
ISIプロット（符号間干渉解析機能）
ISIプロットは、符号間干渉の影響を分析するためのツールで、任意のデータパターン(3～10bit)が信号に与える影響を分離・比較することができます。ISIプロットは、データ依存性ジッタ（DetaDependentJitter）のみを反映したアイ･パターンを描くことができるため、伝送路の影響によるアイパターンの劣化を正確に測定する事ができます。また、ISIプロットはランダムパターンからDDjを測定することができるため、システム・デバッグに最も適したツールと言えます。
マスク・バイオレーション・ロケータ（エラー・ロケータ）
マスク・バイオレーション・ロケータ（エラー・ロケータ）は、マスクに対する違反箇所を、カラー･スポットで表示します。このカラー･スポットは、波形データがマスク･テンプレートと
接触するすべてのポイントに表示されます。マスク・エラー・ロケータは、エラー箇所をリストアップし、エラー波形を呼び出すことができます。これにより、通常のアイパターン解析では把握できない「エラーした瞬間の波形」を表示することができるため、ISI（符号間干渉）の解析に威力を発揮します。エラー・ロケータはエラーした瞬間の他のチャンネルの信号を表示することができるため、エラーした瞬間の機器の動作を把握することができます。

ページトップへ

クリックで詳細表示されます

ミックスド・シグナル・ソリューション

Memory Options

サンプリング速度オプション

ハードウエア・オプション

Remote Control/Network Options

電源解析

トリガ／デコード・パッケージ

ジッタ解析パッケージ

デジタル・フィルタ・パッケージ

高速転送・制御インタフェース

コンプライアンス・テスト・パッケージ

シリアル・データ解析

その他、汎用ソフトウエア

その他オプション

オシロスコープチャンネル同期オプション

データストレージ解析

ミックスド・シグナル・アクセサリ

テスト・フィクスチャ

クリックで詳細表示されます

プローブ・アダプタ

アクティブ・プローブ

電流プローブ

差動アンプ

差動プローブ

高圧差動プローブ

高圧プローブ

O/E変換器

パッシブ・プローブ

プローブ・キット