Support
Technical Library

On Demand Webinars

Browse these recorded webinars presented by Teledyne LeCroy technical experts.

View Upcoming Webinars »

Sep 26 ,2024
What is a Digital Phosphor Oscilloscope?
In Part 9 of our 2024 Oscilloscope Coffee Break Webinar Series we explain what is meant by a digital phosphor oscilloscope (DPO), a phrase used by Tektronix to describe their fast update rate technology.
Sep 26 ,2024
Improving Wireless Sound with WPS Reference Audio
Users judge audio systems on their audio experience. Sound fluctuations, distortion, and latency sour a user experience. These problems can be difficult to diagnose. In this webinar, we show you how Teledyne LeCroy’s Wireless Protocol Suite reference audio feature simplifies troubleshooting by using known audio with the Audio Expert System.
Sep 25 ,2024
Fundamentals of DDR Memory Testing
In Part 1 of our How to Become an Expert in DDR Memory Test webinar series we provide an overview of DDR interfaces and test challenges. Special attention will be paid to the differences between validation and compliance test requirements, and preparing for DDR memory test.
Sep 18 ,2024
Characterizing a MEMS switch for High-speed SerDes Interfaces
Learn about MEMS switch fundamentals and best measurement and analysis practices for VNA characterization of an RF switch and other components in high-speed SerDes interfaces with Prof. Eric Bogatin.
Sep 17 ,2024
How to Debug In-vehicle Network (IVN) Bus Systems
In Part 3 of our Testing In-vehicle Networks Webinar Series we tackle IVN link communication, wielding the power of oscilloscopes to debug both Point-to-Point and Multidrop architectures across physical and protocol layers.
Sep 12 ,2024
In the Lab with Eric Bogatin - Part 8: Understanding On-die Rail Voltages by Measuring Quiet High and Low Signals
Eric reveals how to probe quiet HIGH and LOW signals to uncover hidden power rail and ground voltages on the die
Sep 11 ,2024
How to Debug DisplayPort™ 2.1 PHY-logic and Sideband Link Layers
In this webinar we will focus on compliance and interoperability (C&I) of USB Type-C connected sources and sinks, with practical approaches to debugging electrical system issues that may occur when connecting USB-C devices together and meeting all VESA Specifications.
Aug 29 ,2024
Bluetooth Low Energy Fundamentals: RF-PHY
In this webinar, we will explore the Bluetooth Low Energy RF characteristics and specifications and introduce the testing required for Bluetooth SIG Qualification.
Aug 22 ,2024
When Do I Need to Deskew Channels or Probes on an Oscilloscope?
In Part 8 of our 2024 Oscilloscope Coffee Break Webinar Series we look at propagation delay: what it is and how deskew in digital scopes corrects timing mismatches between channels and probes. Learn when precision deskew is crucial and when it can be skipped.
Aug 14 ,2024
Part 2: In-Depth Analysis of Wi-Fi 7 and Bluetooth
Join Teledyne LeCroy and Intel for Part 2 of our discussion about Wi-Fi 7. In this session, we'll talk about the Coexistence issues with Bluetooth and Wi-Fi 7.
Aug 13 ,2024
Testing UniPro Conformance
This webinar will help define the difference between Compliance and Conformance, followed by a deep dive into Conformance Testing for the MIPI UniPro 2.0 specification.
Aug 8 ,2024
In the Lab with Eric Bogatin - Part 7: Getting the Lead Out – Expert Soldering Tips
This webinar reveals Eric's secrets to forming flawless connections by unlocking the holy trinity: optimal temperature, pristine surfaces, and the magic touch of flux.
Jul 25 ,2024
How Does an Oscilloscope Probe Affect My Oscilloscope Gain Settings, Accuracy, Noise, and Dynamic Range?
In Part 7 of our 2024 Oscilloscope Coffee Break Webinar Series we explore the hidden impact of probes on oscilloscopes, revealing how they subtly alter the instrument's behavior.
Jul 22 ,2024
Introduction to New Low-Profile 12-Bit High Definition Oscilloscopes
See how our T3DSO4000L-HD low-profile 12-bit high definition oscilloscope empowers users to capture, analyze, and visualize signals with exceptional clarity and accuracy.
Jul 19 ,2024
第15回 パワエレフォーラム - ワイドバンドギャップ半導体に対応したパワエレ測定技術
炭化ケイ素(4H-SiC)や窒化ガリウム(GaN)のようなワイドバンドギャップ半導体は、従来のシリコン(Si)に比べて高い絶縁体圧や熱伝導率などの優れた特性によりインバータなどの電力変換回路の高効率化、小型化を実現して普及がすすんでいます。現在多くの企業や研究所において、さらなる性能向上を目指して研究開発が進められています。こうした半導体を用いた回路では、高電圧で高速なスイッチング動作をするため、計測においても新たな計測技術が求められています。特に、高電圧、広帯域、高CMRRという特性を持つプローブが理想的です。また、スイッチング動作の詳細な解析のためJEDECの推奨するダブルパルス法のような計測手法の重要性も高まっています。本セミナーにおいては、テレダイン・レクロイが提案するプローブおよびパワーデバイス解析ソフトウェアを用いたパワエレ測定のご紹介をさせていただきます。(日本語、20分)
Jul 19 ,2024
Verifying MIPI CSI Image Sensor Integration
This webinar will provide an overview of the CSI protocol and will identify areas of concern when integrating MIPI CSI cameras and Image Sensors.
Jul 17 ,2024
Bluetooth Products: A Smarter Way to Test
In this webinar, we will explore the fundamentals of testing types, how testing fits within the product lifecycle and when to use automated versus manual testing. We will explore these topics using the latest Test Services, and will follow the presentation with a question and answer session.
Jul 11 ,2024
In the Lab with Eric Bogatin - Part 6: Using a Slammer Circuit and Reducing Power Rail Switching Noise with Decoupling Capacitors
In this webinar, we describe how to build a simple slammer circuit that will draw a fast transient current from the power rail to simulate a rapid load and release, and how to minimize the transient switching noise on the power rail using decoupling capacitors.
Jul 10 ,2024
Introducing Wi-Fi 7 Technology/Discussion Part 1
Intel joins Teledyne LeCroy to discuss Wi-Fi 7, coexistence with other technologies in the 2.4 ISM Band, and how higher data rates are implemented with 320 MHz wide packets and the use of 4096 QAM - then we'll show how Frontline tools capture and decode Wi-Fi 7.
Jul 4 ,2024
オシロスコープ使いこなしセミナー(第13回)~プローブ編~
第十三回目の今回は、お客様からの要望も多いプローブについてご紹介します。 テレダイン・レクロイのオシロスコープで使える最も基本的なパッシブプローブから、高電圧、高周波、光絶縁や電流プローブまで、様々なプローブについて、原理や安全で正確な測定のための使い方等を学びます。  (日本語、60分)
Jun 27 ,2024
What is the Difference Between a Real-time Oscilloscope and a Sampling Oscilloscope?
In Part 6 of our 2024 Oscilloscope Coffee Break Webinar Series we explain the difference between a real-time oscilloscope and a sampling oscilloscope in terms of their architectures and typical applications for each.
Jun 26 ,2024
How to Maximize Digital Oscilloscope Signal Integrity
Attendees will learn how to operate a digital oscilloscope to optimize vertical measurement accuracy, precision and dynamic range.
Jun 20 ,2024
Advanced Debugging with Wireless Protocol Suite 4.00
Debugging complex situations means you need consistent user interfaces, along with the ability to do same operations via automation API. Additionally, the analytic architecture must be optimized for faster packet processing with an increased packet volume for technology, such as Wi-Fi 7. In this talk we will discuss how Wireless Protocol Suite 4.00 handles these challenges.
Jun 19 ,2024
How to Debug USB4 and USB 3.2 PHY-logic (PHY-Protocol) and Sideband Links
In this session we focus on compliance and interoperability (C&I) of USB Type-C connected hosts, hubs, adapters, and peripherals, with practical approaches to debugging electrical system issues that may occur when connecting USB-C devices together and meeting all USB-IF and Thunderbolt Specifications.
Jun 13 ,2024
In the Lab with Eric Bogatin - Part 5: Using the Oscilloscope to Measure Loop-to-loop Crosstalk
This webinar unlocks the secrets of loop-to-loop crosstalk, revealing its link to mutual inductance and showcasing PCB design tricks to silence this noisy foe.
Jun 12 ,2024
How to Test GaN and SiC MOSFET and IGBT Devices
Learn how to effectively test and qualify GaN MOSFETs, SiC MOSFETs, and Si IGBTs utilizing a double-pulse test circuit and high-voltage isolated probes. You will also gain insights into using benchtop test instruments to analyze their circuits safely and comprehensively, both qualitatively and quantitatively.
Jun 4 ,2024
What Information is Provided by Controller Area Network (CAN) Eye Diagrams?
Eye diagrams are a widely used method to quickly assess the signal integrity of serial data systems. In this webinar, we will explain how to create eye diagrams using an oscilloscope and how they can be applied to Controller Area Network (CAN) systems.
May 30 ,2024
オシロスコープ使いこなしセミナー(第12回)~入門編
本セミナーは、テレダイン・レクロイ製オシロスコープやプローブの使い方の基本から、テレダイン・レクロイ製品ならではの高度な機能まで幅広く知っていただくためのセミナーとなります。  12回目の今回は、本セミナーシリーズの中でも人気の高い「入門編」を開催いたします。 入門編では、デジタル・オシロスコープの動作の解説、基本操作として水平軸操作、垂直軸操作、トリガ操作を中心に、見やすいレポート作成のコツや手間を省いて時短するTIPs等もご紹介します。 ① オシロスコープのブロック図と動作の基本 ② 波形捕捉までの基本操作 ③ 水平軸操作 垂直軸操作 ④ トリガ操作 ⑤ 設定や波形、画面の保存とLabNotebook形式による一括保存 ⑥ 見やすい画面設定のコツ (日本語、60分)
May 23 ,2024
What is Oscilloscope Offset and Position?
In Part 5 of our 2024 Oscilloscope Coffee Break Webinar Series we explain the difference between oscilloscope offset and position and how to measure signal DC offset with an oscilloscope. Additionally, we offer insights on leveraging oscilloscope offset adjustments to streamline measurements on power rails and other floating signals.
May 15 ,2024
PCI Express 7.0 Transmitter Characterization - Comparison of Simulated to Measured Results on First Silicon
In this webinar, we showcase Alphawave Semi's IBIS-AMI performance, analyzed using Teledyne LeCroy's WaveMaster® 8650HD oscilloscope and SDAX software, targeting PCIe® 7.0. The demonstration highlights potential tests for 128 Gbps DSP-based SerDes for PCIe 7.0 signal transmission.
May 9 ,2024
In the Lab with Eric Bogatin - Part 4: Understanding the Function Generator and Using it Properly
This webinar demystifies function generators by exploring output impedance through measuring and comparing Thevenin voltage and resistance across setting adjustments.
May 1 ,2024
DisplayPort™ Compliance Test Overview From USB-C® to Native DisplayPort 2.1
In this webinar, we review the latest PHY test requirements DisplayPort 2.1. Source and Sink test updates and new VESA compliance program requirements. Also, the latest on USB Type-C® LRD (Linear Re-Driver) cable testing which extend Ultra-high Bit Rate (UHBR) video links up to 2-3 meters.
Apr 30 ,2024
DisplayPort 2.1 Compliance - Industry Update and Roadmap
Please join our latest webinar where we’ll cover the key developments in protocol compliance for next-generation DisplayPort devices.
Apr 25 ,2024
What is Oscilloscope Spurious Free Dynamic Range (SFDR)?
In Part 4 of our 2024 Oscilloscope Coffee Break Webinar Series we explain and provide examples of spurious free dynamic range (SFDR) measurements in an oscilloscope analog-to-digital converter (ADC).
Apr 24 ,2024
Introduction to Matter with Wireless Protocol Suite Pt. 2
Join Teledyne LeCroy for a two-part Matter Coffee Break series, where it’s not the coffee that matters, but the Matter protocol. Part 2 will focus on device communication and operation with the Matter protocol.
Apr 23 ,2024
Complete SSD Power and Sideband Testing with with OakGate Test Solutions
Join Teledyne LeCroy for an in-depth webinar on Power and Sideband Testing with Teledyne LeCroy’s powerful, new OakGate R350-G5 PowerPlus SSD Test Solution.
Apr 17 ,2024
High-speed Signal and Serial Data Testing Part 2 – How to Make Precise High-speed Oscilloscope Measurements
In Part 2 of our Fundamentals of High-speed Signal and Serial Data Testing webinar series we describe how to optimize your oscilloscope setup, make measurements accurately, explain the serial data signal spectrum, and provide background and tips/techniques to optimize for serial data eye diagram and jitter measurements.
Apr 11 ,2024
In the Lab with Eric Bogatin - Part 3: Building a Prototype PCB and Making Tradeoffs
In this webinar Eric advocates for solderless breadboarding as a fast track to PCB confidence, slashing schedules, refining debug features, and boosting design certainty.
Apr 11 ,2024
Introduction to Matter with Wireless Protocol Suite Pt. 1
Join Teledyne LeCroy for a two-part Matter Coffee Break series, where it’s not the coffee that matters, but the Matter protocol. Part 1 will be a thirty-minute introduction to the Matter protocol.
Apr 10 ,2024
Decoding I2C, SPI & UART Signals with an Oscilloscope
Our webinar will guide you through utilizing your oscilloscope for decoding these protocols, offering essential techniques and knowledge to boost your troubleshooting and analytical skills. Join us to gain insights into decoding I2C, SPI, and UART effectively.
Apr 2 ,2024
How to Compliance Test In-vehicle Network (IVN) Bus Systems
In Part 2 of our Testing In-vehicle Networks Webinar Series we dive deep into mastering PMA compliance testing for in-vehicle networks, covering setup, tools, techniques, and secrets for optimal signal integrity.
Mar 28 ,2024
What is Oscilloscope Aliasing?
In Part 3 of our 2024 Oscilloscope Coffee Break Webinar Series we explain aliasing in an oscilloscope, what aliasing looks like on a real signal, and how to avoid aliasing by understanding the proper minimum ratio of oscilloscope sample rate to bandwidth.
Mar 27 ,2024
Better Sifting of Wireless Data
Wireless Protocol Suite’s (WPS) query-based filtering provides quick answers to diverse questions customers have in a sea of wireless data. This filtering extends WPS’s protocol organization and decoding. Learn how to answer common (and not so common) wireless questions with query-based operators and filters with the added treasure of saved time.
Mar 20 ,2024
High-speed Signal and Serial Data Testing Part 1: How to Build a Great Measurement Foundation
In Part 1 of our 2-part Fundamentals of High-speed Signal and Serial Data Testing webinar series we instruct on proper cable, fixture and probe connection to the oscilloscope, describe the accuracies you can expect, and how to avoid errors.
Mar 14 ,2024
In the Lab with Eric Bogatin - Part 2: Mastering the Oscilloscope for Signal and Noise Measurements
This webinar delves into mastering the oscilloscope by minimizing noise, mastering measurement practices, and optimizing signal input for superior SNR.
Mar 14 ,2024
オシロスコープ使いこなしセミナー(第11回)~オシロのリモート制御編~
本セミナーは、テレダイン・レクロイ製オシロスコープやプローブの使い方の基本から、テレダイン・レクロイ製品ならではの高度な機能まで幅広く知っていただくためのセミナーとなります。  今回は、オシロスコープのリモート制御を始めてみたい方に向けた、初心者向けの内容でお送りします。 レクロイのサイトからダウンロードできるリモート接続ツールを使えば、USBメモリを介さずにPCに直接データや画面ショットをダウンロードすることができます。 また、リモート制御コマンドを活用し、ご自身でプログラミングすることで、測定の自動化を行うことができ、定型の繰り返しの実験やデータ取得の効率化、長時間にわたる自動計測を実現できます。 ① WaveStudioによるリモート制御 ② MAUI Studioによるリモート制御 ③ 自作プログラミングの第一歩 ・レガシーコマンドとAutomationコマンド
Mar 14 ,2024
オシロスコープ使いこなしセミナー(第11回)~オシロのリモート制御編~
本セミナーは、テレダイン・レクロイ製オシロスコープやプローブの使い方の基本から、テレダイン・レクロイ製品ならではの高度な機能まで幅広く知っていただくためのセミナーとなります。  今回は、オシロスコープのリモート制御を始めてみたい方に向けた、初心者向けの内容でお送りします。 レクロイのサイトからダウンロードできるリモート接続ツールを使えば、USBメモリを介さずにPCに直接データや画面ショットをダウンロードすることができます。 また、リモート制御コマンドを活用し、ご自身でプログラミングすることで、測定の自動化を行うことができ、定型の繰り返しの実験やデータ取得の効率化、長時間にわたる自動計測を実現できます。 ① WaveStudioによるリモート制御 ② MAUI Studioによるリモート制御 ③ 自作プログラミングの第一歩 ・レガシーコマンドとAutomationコマンド (日本語、60分)
Mar 13 ,2024
Testing for Perfect USB-C® and HDMI® Cables-Part 2: Assessing Vendor Quality and Detailed Failure Analysis
In Part 2 of our How to Test for Perfect USB-C® and HDMI® Cables webinar series we provide details on how to assess failed cables to understand what the root-cause failure mode is and what that failure mode or test data means in terms of cable operation. Not all failures are equal, and we will describe those types of failures that will critically impact cable performance.
Feb 29 ,2024
Illustrating Channel Sounding Applications
In part three of our series, we analyze Channel Sounding applications, and how they compare and contrast.
Feb 28 ,2024
Get Ready for PCI Express 6.0 Protocol Testing
Join Teledyne LeCroy for an in-depth webinar on testing the new PCI Express 6.0 standard. We will explore new features in the PCI Express Protocol including Flit mode, new low power modes, new encoding schemes and error correction methods to accommodate the use of PAM4 signaling which is required for 64GT/s data rates.
Feb 27 ,2024
ウェビナー -デュアルゲインアンプを内蔵したデジタイザによるパルス測定のダイナミックレンジ最大化
このウェビナーでは、ナノ秒の時間領域パルスを比類のない精度で測定する方法を紹介します。デュアルゲイン・データ・アクイジション・ボードにより、これまでにないレベルの高サンプリング・レートと分解能を同時に実現できます。これにより、高振幅と低振幅のパルスが共存する短時間の信号を取得するために、非常に高いダイナミックレンジを実現することができます。
Feb 22 ,2024
What are Oscilloscope ADC Effective Bits and ENOB?
In Part 2 of our 2024 Oscilloscope Coffee Break Webinar Series we explain how analog-to-digital converters (ADC) work in oscilloscopes and how the ADC digital bit specification is impacted by the performance of the analog portion of the ADC.
Feb 20 ,2024
Fundamentals of In-vehicle Network (IVN) Bus Systems
In Part 1 of our Testing In-vehicle Networks Webinar Series we delve into the evolving world of In-vehicle Networks, exploring their history, the advantages of new technologies, and the design challenges they present.
Feb 20 ,2024
112Gbps SerDes Masterclass 3
Our third masterclass focuses on how to get the best performance out of your 112G SerDes solution. This webinar features four demonstrations on how to succeed with Auto-Negotiation and Link Training, with detailed explanations by technical experts from Synopsys and Teledyne LeCroy.
Feb 15 ,2024
Testing HDMI EDIDs for Source and Sink Devices
This webinar will cover HDMI EDIDs and how EDIDs are tested for both HDMI source and sink devices. Examples shown using the Teledyne LeCroy M41h and 980 48G module test instruments.
Feb 14 ,2024
Analyzing/Debugging Channel Sounding Capture Webinar
In Part 2 of our Bluetooth Channel Sounding Coffee Break Series, " Analyzing and debugging a Channel Sounding capture with Wireless Protocol Suite (WPS)," we build on our understanding of Channel Sounding with capture analysis.
Feb 14 ,2024
Testing for Perfect USB-C® and HDMI® Cables-Part 1: Fundamentals of USB-C and HDMI Cable Test Requirements
In Part 1 of our How to Test for Perfect USB-C® and HDMI® Cables webinar series we provide background on what tests are required or recommended by the USB-C or HDMI cable standards, and what purpose the tests serve. We also describe all of the possible methods to complete these tests and what these tests indicate about vendor cable quality.
Feb 9 ,2024
第13回 パワエレフォーラム講演 - 三相インバータ・モータのオシロスコープベース 過渡パワー解析
インバータやモータのパワー解析の手法として、オシロスコープベースの解析事例をご紹介します。 オシロスコープは、他のパワーアナライザ機器に比べて、急峻な立ち上がりエッジをもつWBGデバイスにも対応できる非常に高いサンプリング速度と帯域を持ち、スイッチング周期ベースでの非常に短い時間から数分間にわたる長い時間まで、パワーパラメータ、メカニカルパラメータの時間変動を可視化する過渡応答解析をすることが出来ます。またトラブルシュート時にはオシロスコープの汎用デバック機能をフルに使ってシステム挙動の相間をとることで迅速な原因特定が可能です。こうした手法を実際の事例を交えながら解説いたします。(日本語、18分)
Feb 7 ,2024
M21 Video Analyzer/Generator… New Features!
The presentation will provide an overview of the HDMI video generation features and the HDMI and DisplayPort video analysis features through connection to external devices.
Feb 6 ,2024
Demystifying PCIe Design and Test Webinar
In this webinar co-hosted with Granite River Labs, we will delve into the intricacies of PCIe Electrical, Link and Protocol Design & Test. We will focus on PCIe 5.0 and 6.0 while looking ahead to 7.0, and examine Compute Express Link (CXL) which leverages PCIe.
Jan 31 ,2024
Introduction to Channel Sounding with Wireless Protocol Suite
In this first webinar of our Channel Sounding Coffee Break Series, we lay the foundation for understanding Channel Sounding.
Jan 24 ,2024
Tips and Techniques for 10Base-T1S Automotive Ethernet Test & Debug
Learn how to apply common oscilloscope tools to speed 10Base-T1S single pair and automotive ethernet test.
Jan 17 ,2024
USB4最新規格動向 ~USB4実装へ、最新の規格情報や検証/デバッグを一挙解説!~
高データレート化と共にますます複雑になるコンプライアンステストおよびデバッグのために、アンリツ株式会社とテレダイン・レクロイはいちはやく規格をキャッチアップし、最新のテストニーズに答えます。本セミナーでは、v1/v2仕様含めて、Tx/Rxコンプライアンステスト、プロトコル層含めたデバッグについて最新のテスト事情について解説します。(日本語)
Dec 14 ,2023
How Do I Make 3-phase Power Measurements with an Oscilloscope?
In Part 12 of our 2023 Oscilloscope Coffee Break Webinar Series we provide the mathematical explanation of the power calculations used in power analyzers and oscilloscopes and how both instruments identify a power cycle during which to calculate values.
Dec 13 ,2023
WPS 3.20 Release Features - Channel Sounding, Enhanced Filtering, New Profiles
Learn in this webinar the basics of Bluetooth’s Channel Sounding and how Wireless Protocol Suite’s (WPS) 3.20 release provides insight into this new distance estimation technique. Additionally, we will show enhanced filtering of packet information and the medical tab supporting the Generic Health Sensor Profile.
Dec 13 ,2023
Fundamentals of EMI Tutorial: 3 Simple Pre-compliance Tests You Should Be Performing
In this webinar, Professor Eric Bogatin describes three common design features to avoid to reduce EMI problems and demonstrate pre-compliance tests that will identify problems before you submit your product for an expensive EMI compliance test.
Dec 12 ,2023
Testing Flexible Data Placement Mode with OakGate SSD Test Appliances
Learn how Flexible Data Placement (FDP) is impacting the solid-state storage industry, and how to use the FDP feature set to configure and test your FDP-ready solid-state storage devices.
Dec 12 ,2023
Get Ready for PCI Express® 6.0 Testing
Join Teledyne LeCroy for an in-depth webinar on testing the new PCI Express 6.0 standard. We will explore new features in the PCI Express Protocol including Flit mode, new low power modes, new encoding schemes and error correction methods to accommodate the use of PAM4 signaling which is required for 64GT/s data rates.
Dec 8 ,2023
Bluetooth® Interoperability and Co-Existence
Join Teledyne LeCroy for a webinar on Bluetooth Interoperability and Co-existence. We explore the fundamentals of testing types, the best test strategy to ensure a great product, Bluetooth co-existence with other technologies and the challenges that presents, and case studies.
Dec 6 ,2023
Understanding and Testing DisplayPort™ Panel Replay
Join this webinar for a detailed training on Panel Replay mode for DisplayPort 2.1 and explore the latest power-saving features and protocol behaviors with a focus on testing and validating Panel Replay and its predecessor Power Self-Refresh 2 (PSR2) implementations.
Dec 5 ,2023
車載Ethernetテストのエキスパートになるために パート 4:車載イーサネット PHY 層リンク通信のデバッグ
このシリーズでは、車載イーサネットのエキスパートになるために必要なこと を、基礎知識から始まり、コンプライアンステストやデバッグの事前準備の方法に至 るまで、すべて紹介します。 ● 車載イーサネットのトポロジー、シグナリング、フレーム構造の簡単なレビュー ● マルチドロップ・リンクのデバッグ ● ポイントto ポイント・リンクのデバッグ 他 (日本語、37分)
Nov 16 ,2023
How Do I Make an XY Display on an Oscilloscope?
In Part 11 of our 2023 Oscilloscope Coffee Break Webinar Series we will provide typical examples of XY plots and how they are created.
Nov 16 ,2023
Remote Wireless Protocol Capture Using Ethernet
Learn how to capture wireless protocol remotely over Ethernet and how this feature changes the dynamics of testing and automation.
Nov 8 ,2023
PCIe® 6.0 Electrical Compliance Test Overview
In this webinar we describe the PCI Express 6.0 electrical compliance test procedures – what’s new, what’s the same as past generations, and how to avoid the most common test pitfalls.
Oct 27 ,2023
第12回パワエレフォーラム講演 ─ パワーエレクトロニクスで使用する高電圧プローブの正しい選び方
オシロスコープには様々なプローブが用意されています。全ての特性について完全なプローブというのは存在しないため、その中からご自身の実験に最適なものを選択しなければなりません。プローブの仕様の意味。どれを選択すべきで、どれを選択すべきでないのか。実際の波形の違いなどもご紹介しつつ解説します。(日本語、20分)
Oct 26 ,2023
オシロスコープ使いこなしセミナー(第九回) 演算と計測パラメータ編
今回ご紹介する機能には、主に弊社オシロスコープのWaveRunnerシリーズ, HDO6000以上のクラスが対象となります。特にレクロイ製品の昔からの特徴である、計測パラメータ値の変動表示の方法、TrendとTrack演算について詳しく解説します。二人の掛け合い形式で進行する本セミナーは、実際のオシロ画面も見ていただきながら、リズム良く、飽きることなくご視聴いただけます。(日本語、60分)
Oct 26 ,2023
How Do I Rescale a Sensor to Use With an Oscilloscope?
In Part 10 of our 2023 Oscilloscope Coffee Break Webinar Series we describe various techniques used to take sensor outputs and rescale them into appropriate and useful non-voltage scientific units for display as an easily understandable waveform on an oscilloscope.
Oct 19 ,2023
Test your HDMI and DisplayPort Devices with the new quantumdata M21
This webinar introduces the M21 Video Analyzer/Generator for HDMI 8K and DisplayPort UHBR testing.
Oct 18 ,2023
Shorten the debugging of Bluetooth LE Audio with Audio Expert System
View our webinar to learn how to shorten the debugging phase of development.
Oct 18 ,2023
Understanding Signal Integrity Problems in USB Type-C® and HDMI® 2.1 Cables
Attendees will learn how to improve assessment of failed cables and determine and understand how to improve the cable design to improve production yield and lower production cost.
Oct 5 ,2023
車載Ethernetテストのエキスパートになるために パート3 :トランスミッタドループ、歪み、ジッタ、スペクトル密度テストの習得
このシリーズでは、車載イーサネットのエキスパートになるために必要なこと を、基礎知識から始まり、コンプライアンステストやデバッグの事前準備の方法に至 るまで、すべて紹介します。 本セッションでは、複雑な信号を使用したPMA Physical Media Attachment )コンプライアンステストの要件を説明しながら、最良の測定結果とシグナルインテグリティを得るための手順を示します。  ●車載イーサネット物理層のまとめ/おさらい  ●PMA(Physical Media Attachment )コンプライアンステストの紹介  ●デバイスのテストモード、出力、フィクスチャ  ●テスト機器要件 他 (日本語、45分)
Oct 4 ,2023
How to Debug PCIe® Link Equalization (LEQ) Training and Other Dynamic Link Behaviors
Join Teledyne LeCroy’s industry experts to learn new techniques to validate and debug link training and other protocol-directed electrical behaviors.
Sep 28 ,2023
How Do I Make a Differential Measurement on an Oscilloscope Using Passive Probes?
In Part 9 of our 2023 Oscilloscope Coffee Break Webinar Series we explain how a differential voltage probe works and how two passive probes can be used to make the same type of measurement on an oscilloscope.
Sep 21 ,2023
Making Your Bluetooth LE Devices Robust with Automated Regression Testing
This webinar shows how the Frontline Harmony LE Tester is critical for successful device development by providing automated regression, debug, and parameter robustness testing.
Sep 20 ,2023
Fundamentals of Signal Integrity Tutorial: Don’t Be Confused by Ground
Learn how to identify the types of grounds in your product and how to avoid common measurement artifacts with Prof. Eric Bogatin.
Sep 19 ,2023
Open Compute Project (OCP) 2.0 SSD Compliance Software Testing
Join Teledyne LeCroy for an in-depth webinar on the Open Compute Project (OCP) 2.0 SSD Compliance Software Testing. Explore the importance of testing OCP 2.0 and learn to use the OCP 2.0 Compliance Software Suite.
Sep 13 ,2023
How to Debug PCI Express® Power Management Behaviors
Learn new techniques to validate and debug PCIe link training, power management transitions, and other protocol-directed electrical behaviors.
Sep 6 ,2023
How to Perform Double Pulse Testing (DPT) on GaN and SiC Devices
In this webinar attendees will learn how to perform the double pulse test safely, and capture and characterize a GaN or SiC power semiconductor device’s dynamic response.
Sep 6 ,2023
Get Ready for CXL 1.1 and 2.0 Compliance Testing
An in-depth webinar on compliance testing for the new Compute Express Link (CXL) standard. We explore the main features in the CXL Protocol including Alternate Protocol Negotiation, ALMP initialization and Link Enumeration.
Sep 5 ,2023
USB4およびThunderbolt 用CrossSync PHYを用いたPHY Logic層のデバッグ
テレダイン・レクロイはプロトコル・アナライザとオシロスコープと連動させて解析することで従来の手法では困難なデバッグ作業を効率的に行うUSB4対応のCrossSync PHY(クロスシンクファイ)を発表しました。 今回はUSB4およびThunderbolt 用CrossSync PHYを使用したPHY Logic 層のデバッグを、実例を含めてご紹介します。(日本語、36分)
Aug 31 ,2023
Part 2 - Getting More Value Out of Your Wi-Fi Capture
Learn how Teledyne LeCroy’s Wireless Protocol Suite’s (WPS) new Wi-Fi and Bluetooth coexistence features make difficult needs a reality.
Aug 24 ,2023
How Do I Measure Current on an Oscilloscope Using a Shunt Resistor?
In Part 8 of our 2023 Oscilloscope Coffee Break Webinar Series we provide practical guidance on how to probe the voltage drop across the shunt resistor to minimize noise and accurately measure the current on your oscilloscope.
Aug 24 ,2023
オシロスコープ使いこなしセミナー(第八回) プローブ編(2)
本セミナーは、テレダイン・レクロイ製オシロスコープやプローブの使い方の基本から、テレダイン・レクロイ製品ならではの高度な機能まで幅広く知っていただくためのセミナーとなります。 今回は、参加者の皆様からご好評をいただいておりますプローブ編のPart2をお届けいたします。 パワエレ測定に使用する様々なプローブとその選び方について、各種プローブの実例と比較等々をご紹介いたします。(日本語、60分)
Aug 9 ,2023
エリック・ボガティン博士 高速シリアルデータリンクの測定とシミュレーションとの相関関係を理解できるエキスパートになるために
講師:エリック・ボガティン博士、コロラド大学ボルダー校、テレダイン・レクロイ・フェロー (このセミナーは日本語訳、また日本語音声を付けたものとなります) テレダイン・レクロイのフェローであるエリック・ボガティン教授と共にAnsys社のツールを使って、高速シリアルデータリンクの設計に不可欠な、測定及びシミュレーションの実践方法とそのプロセスを学びます。 プロセスとその最善な実践方法について説明し、そのプロセスを検証するために、特性が確実に分かっているテスト機器を使って測定とシミュレーションとの相関関係も学びます。(日本語、64分)
Aug 3 ,2023
Test your HDMI 8K Devices with the new quantumdata M21
Join our HDMI 8K webinar for an overview of the HDMI video generation features and the HDMI video analysis features through connection to external devices, and more.
Jul 27 ,2023
Organizing Bluetooth Complexity with Wireless Protocol Suite 3.00
As Bluetooth gets more complicated, it becomes more important to have fast, efficient analytic tools that organize its complexity intelligently. This means you need consistent user interfaces for new Bluetooth features that integrate into the existing workflow. In this talk, we discuss how Wireless Protocol Suite (WPS) 3.00 handles these challenges.
Jul 27 ,2023
How Do I Make a Current Measurement with an Oscilloscope?
In Part 7 of our 2023 Oscilloscope Coffee Break Webinar Series we describe the various methods to acquire and display a scaled current signal using an oscilloscope’s voltage input.
Jul 12 ,2023
Analyzing Electronic Warfare Signals with Oscilloscopes
In Part 2, Electronic Warfare Signal Advanced Customization and Application Examples, we describe how to implement custom algorithms for classified signal analysis, and showcase advanced application-specific examples of electronic warfare signal analysis
Jun 29 ,2023
How Can I Reduce Noise on Signals Measured With an Oscilloscope?
In Part 6 of our 2023 Oscilloscope Coffee Break Webinar Series we describe common causes of oscilloscope noise and how additive noise from the oscilloscope can be reduced to improve the quality of your measurement result.
Jun 22 ,2023
オシロスコープ使いこなしセミナー(第七回) プローブ編
テレダイン・レクロイのオシロスコープで使える最も基本的なパッシブプローブから、高電圧、高周波、光絶縁や電流プローブまでの様々なプローブについて、原理や安全で正確な測定のための使い方について学びます。 二人の掛け合い形式で進行する本セミナーは、実際のオシロ画面も見ていただきながら、リズム良く、飽きることなくご視聴いただけます。セミナー中の質問もどしどし受け付けておりますので、「見て!聴いて!質問して!」ライブならではのセミナーに是非ご参加ください。(日本語、60分)
Jun 21 ,2023
Fundamentals of Power Integrity Tutorial: Measuring Power Sources
Join Prof. Eric Bogatin to learn the three most important tests to verify the quality of your VRM and the best measurement practices.
Jun 14 ,2023
Analyzing Electronic Warfare Signals with Oscilloscopes
In part 1, How to Perform Envelope, Frequency, Demodulation and Phase Analysis on Electronic Warfare Signals , we describe how to utilize common oscilloscope tools to provide a range of advanced characterization and debugging capabilities for a variety of different electronic warfare signals
Jun 13 ,2023
How to Debug Automotive Ethernet PHY Layer Link Communications
In Part 4 of our How to Become an Expert in Automotive Ethernet Testing Webinar Series attendees will learn how to connect to PHY layer devices and how to use oscilloscope tools to trigger, decode and use tools to test and debug communication between an Automotive Ethernet Master and Slave.
Jun 7 ,2023
How to Production Test USB Type-C® and HDMI® Cables
Join Teledyne LeCroy as we explain the newest test requirements for USB Type-C and HDMI cables.
Jun 7 ,2023
車載Ethernetテストのエキスパートになるために パート1 : コンプライアンス・テスト、評価、デバッグの基礎知識
このセミナーでは、車載イーサネットとは、車載イーサネットのさまざまなバリエーション比較、テスト要件とテスト/デバッグのアプローチ等々を分かりやすくご紹介します。基礎知識から始まり、コンプライアンステストやデバッグの方法に至るまで、車載イーサネットのエキスパートになるために必要な内容が全て網羅されています。(日本語、36分)
May 25 ,2023
Getting Value Out of Your Wi-Fi Capture
Do you want to learn to fish for answers in a sea of Wi-Fi data? This webinar covers concepts like channel usage, frequency congestion, security settings, and quality of service.
May 25 ,2023
How Much Memory Do I Need to Use in my Oscilloscope?
In Part 5 of our 2023 Oscilloscope Coffee Break Webinar Series we define what acquisition memory is in a digital oscilloscope. We also define how acquisition memory, sample rate and capture time are interrelated.
May 24 ,2023
Diving into HDMI Protocol Compliance Testing
Join our webinar for an overview of the HDMI compliance tests required for the HDMI logo program.
May 10 ,2023
112Gbps SerDes Masterclass 2
As the complexity of ensuring interoperability increases, developers and test engineers need solutions that make that process simpler. Co-presented by AMD, MultiLane, Teledyne LeCroy and Xena Networks.
May 10 ,2023
今さら聞けないPCI Express  Part 2: Gen1/Gen2のコンプライアンス試験
今日、PCI Expressは、パソコンやサーバーなどの内部バスとして進展し、Gen7の議論が始まっています。 しかしながら、パソコン以外の分野でもPCI Expressの採用が広がり、新規参入を計画されていらっしゃる方も少なくないと聞き及んでおります。 今回は、そうした方にも分かりやすい、PCI Expressの解説を行いたいと思います。(日本語、34分)
May 9 ,2023
How to Test Automotive Ethernet Transmitter Droop, Distortion, Jitter and Spectral Density Electrical Compliance Test
In Part 3 of our How to Become an Expert in Automotive Ethernet Testing Webinar Series we review what to expect when setting-up and performing Automotive Ethernet physical layer tests. Each of the different tests will be covered in detail with hands-on experience.
Apr 27 ,2023
What is Oscilloscope Sample Rate and How Much Do I Need?
In Part 4 of our 2023 Oscilloscope Coffee Break Webinar Series we define what sample rate is and what high sample rate provides. We also describe minimum sample rates required and maximum practical sample rates needed for your signal and your oscilloscope.
Apr 20 ,2023
オシロスコープ使いこなしセミナー 第六回 入門編(1)
初心者の方にも参加いただける大好評の「入門編(1)」となります。オシロスコープの使いこなしに役立つ情報満載でお送りいたします。デジタル・オシロスコープの動作解説、基本操作として水平軸操作、垂直軸操作、トリガ操作を中心に学びます。(日本語、60分)
Apr 20 ,2023
Less Work and More Reliability with Wireless Protocol Suite Automation
Join our webinar to learn how to automate wireless capture for Wi-Fi, Bluetooth, Thread and Matter while receiving reliable reproducibility and reducing the amount of human intervention.
Apr 6 ,2023
TDR の活用 ─シグナルインテグリティ障害のデバッグとして
このセミナーではTDRテクノロジを使用してシグナルインテグリティ障害をデバッグし、解決する方法について見ていきます。 (日本語、34分)
Apr 4 ,2023
How to Test Automotive Ethernet MDI Return Loss and Mode Conversion Loss Electrical Compliance Test
In Part 2 of our How to Become an Expert in Automotive Ethernet Testing Webinar Series we provide a background knowledge for MDI S-parameter Automotive Ethernet measurement and what to expect when testing it.
Mar 30 ,2023
How is Rise Time Related to Bandwidth in an Oscilloscope?
In Part 3 of our 2023 Oscilloscope Coffee Break Webinar Series we discuss the relationship between signal rise time and oscilloscope bandwidth and how to choose the right bandwidth of oscilloscope for your application.
Mar 24 ,2023
How Bluetooth® Security Has Improved and Expanded
Join us on a whirlwind tour of Bluetooth Security's growth as we highlight important features and tie together concepts. Our demo focuses on a common problem: decrypting over the air captures with long term keys (LTK).
Mar 22 ,2023
DisplayPort 2.1 Protocol Compliance Guided Tour
Join this technical webinar for a complete briefing on the latest DisplayPort 2.1 compliance test specifications (CTS).
Mar 14 ,2023
Fundamentals of Automotive Ethernet Compliance Test, Validation, and Debug
In Part 1 of our How to Become an Expert in Automotive Ethernet Testing Webinar Series we review the fundamentals of Automotive Ethernet. Who uses it, why they are using it, and what to expect when testing it.
Mar 8 ,2023
How to Measure Jitter Induced by PDN Noise
Join Professor Eric Bogatin as he discusses and demonstrates how to measure in-circuit jitter caused by PDN power integrity noise and other abnormalities.
Mar 8 ,2023
USB Type-C テクノロジ オンラインセミナー・シリーズ ─パート5 : DisplayPort2.0 物理層コンプライアンス・テストの概要
このセミナーはUSB Type-C技術に関する新しいシリーズで、USB 3.2, USB4™, Thunderbolt™ 3, DisplayPort™, USB4 Type-C sideband (USB Power Delivery, DisplayPort AUX, USB4 SB) テストまで、物理層に重点を置いて解説します。 今回はDisplayPort2.0物理層コンプライアンステストの概要を取り上げます。(日本語、43分)
Mar 2 ,2023
Oszilloskop Grundlagen - Teil 5 - Fernsteuerung
Im fünften und letzten Teil der Webinar Serie geht es um die Fernsteuerung von, oder den Fernzugriff auf ein Oszilloskop. Welche Schnittstellen stehen zur Verfügung und welche Tools kann ich verwenden, um einen Fernzugriff zu realisieren?
Mar 1 ,2023
How to Debug USB4® PHY-logic and Sideband Link Layers
Have you thought about using an oscilloscope and a protocol analyzer together to debug USB system level interoperability failures? In this webinar learn practical methods for uncovering compliance and interoperability issues using an oscilloscope.
Feb 28 ,2023
Oszilloskop Grundlagen - Teil 4 - Tastköpfe A-Z
Der vierte Teil der Webinar Serie behandelt ein sehr wichtiges Zubehör von Oszilloskopen, die Tastköpfe. Was gibt es für Tastkopftypen, welche Limitierungen gibt es bei den unterschiedlichen Tastkopftypen und wie vermeide ich Messfehler durch richtige Anwendung der Tastköpfe?
Feb 28 ,2023
Picosecond Accuracy in Multi-channel Data Acquisition
Join Teledyne SP Devices webinar where we explain challenges and solutions for clocking, triggering, and timestamping in Giga-sample-per-second data acquisition systems.
Feb 28 ,2023
Essentials of HDMI Gaming Features
This webinar provides an overview of the HDMI gaming features that have been included in the HDMI 2.1x specification. We discuss the principle of the various gaming features, how they can be tested and what compliance tests are in place to verify them.
Feb 28 ,2023
オシロスコープ使いこなしセミナー 第五回 中級編(2)
テレダイン・レクロイ製オシロスコープの使い方の基本から、テレダイン・レクロイの製品ならではの高度な機能まで幅広く知っていただくためのセミナーを開催いたします。 第五回目の今回は、前回に引き続き使いこなしの中級編として、オシロスコープの自動機能を使った解析について学びます。オシロスコープの使いこなしに役立つ情報満載でお送りいたします。(日本語、60分)
Feb 23 ,2023
Oszilloskop Grundlagen - Teil 3 - FFT & Spectrum Analyse
Im dritten Teil der Webinar Serie geht es um eine Standardfunktion, die es bei fast allen Digitalspeicher Oszilloskopen gibt, der Fast-Fourier-Transformation - FFT. Wie kann der Anwender durch Einstellungen im Zeitbereich das Ergebnis der FFT beeinflussen und wie hilft ihm dabei die Spectrum Analyzer Software?
Feb 23 ,2023
How Much Bandwidth Do I Need in My Oscilloscope?
In Part 2 of our 2023 Oscilloscope Coffee Break Webinar Series we define what analog bandwidth is and review what that means in the context of an oscilloscope.
Feb 17 ,2023
Oszilloskop Grundlagen - Teil 2 - Spezifikationen
Der zweite Teil der Webinar Serie befasst sich mit den Spezifikationen eines Digitalspeicher Oszilloskops. Die meisten Angaben finden sich im Datenblatt eines Gerätes. Allerdings gibt es Unterschiede in der Auslegung der Spezifikationen. Wie sind diese genau zu interpretieren und welche Kriterien sind noch wichtig, die vielleicht nicht im Datenblatt zu finden sind?
Feb 14 ,2023
Oszilloskop Grundlagen - Teil 1 - Basics
Im ersten Teil der Webinar Serie lernen Sie wie ein Digitalspeicher Oszilloskop aufgebaut ist und was Begriffe wie analoge oder digitale Bandbreite, Abtastrate oder Speichertiefe bedeuten. Sie erhalten einen Überblick über Grundfunktionen der Triggerung, sowie Mess- und Mathematikfunktionen.
Feb 10 ,2023
Rapid Decoding of Bluetooth® GATT Applications with WPS
Join us for a practical webinar on how to quickly view and analyze Bluetooth GATT applications with the Wireless Protocol Suite (WPS) software. The webinar shows how WPS’s decoder script can be rapidly developed to analyze existing GATT profiles or be extended to proprietary Bluetooth data.
Feb 9 ,2023
今さら聞けないPCI Express Part 1: PCI Expressの基礎
今日、PCI Expressは、パソコン以外の分野でも採用が広がり、新規参入を計画されていらっしゃる方も少なくないと聞き及んでおります。今回は、そうした方にも分かりやすい、PCI Expressの解説をGen1の基本からGen3まで3部構成で行うシリーズのパート1:PCI Expressの基礎です。(日本語、35分)
Jan 26 ,2023
What is Oscilloscope Resolution?
In Part 1 of our 2023 Oscilloscope Coffee Break Webinar Series we discuss what oscilloscope resolution is and how to get the most out of it.
Jan 11 ,2023
オシロスコープを使った組み込みシステムのデバッグ パート3: 組み込みシステムの検証とデバッグの実例
このシリーズの目的は、組み込み機器設計におけるアナログ、デジタル、シリアル・データ、およびセンサ信号の相互作用の評価とトラブルシューティングに関する知識と効率を向上させることです。 今回のオンライン・セミナー(パート3)では、パート1およびパート2で説明した、表示、計測、波形演算ツールを、実際の組み込み機器のデバッグに適用した例を紹介します。(日本語、70分)
Dec 21 ,2022
What’s new in DisplayPort™ Alternate Mode 2.1!
A detailed technical training on DisplayPort Alt Mode 2.1. We drill-down on DisplayPort Alt-mode over USB Type-C® technology including a detailed look at the mechanisms and protocol that will enable the next generation of DisplayPort 2.1 devices.
Dec 21 ,2022
オシロスコープ使いこなしセミナー 第四回 中級編(1)
テレダイン・レクロイ製オシロスコープの使い方の基本から、テレダイン・レクロイの製品ならではの高度な機能まで幅広く知っていただくためのセミナーを開催いたします。 第四回目の今回は、使いこなしの中級編として、演算と計測パラメータについて学びます。オシロスコープの使いこなしに役立つ情報満載でお送りいたします。(日本語、60分)
Dec 15 ,2022
Using Oscilloscope Pass/Fail Analysis for Productive Validation and Debug
In Part 12 of our Oscilloscope Coffee Break Webinar Series we describe how to test signals against a set of qualifying measurement conditions to establish either a “Pass” or “Fail” result.
Dec 14 ,2022
PCI Express® 6.0 Electrical Compliance Test Overview
PCIe® 6.0 FYI compliance and interoperability testing is expected to begin sometime around October 2023. Get ready with Teledyne LeCroy.
Dec 14 ,2022
Get Ready for CXL 1.1 and 2.0 Compliance Testing
Join Teledyne LeCroy for an in-depth webinar on compliance testing for the new Compute Express Link (CXL) standard. We explore the main features in the CXL Protocol including Alternate Protocol Negotiation, ALMP initialization and Link Enumeration.
Dec 8 ,2022
112Gbps SerDes Masterclass 1
In this webinar, Xena Networks joins forces with AMD Xilinx, MultiLane and Teledyne LeCroy to provide a masterclass in implementing 112Gbps SerDes.
Dec 8 ,2022
エリック・ボガティン博士 必要なものとその理由 ─ TDR、Sパラメータ、またはその両方
シグナル・インテグリティ業界の第一人者であるエリック・ボガティン博士とテレダイン・レクロイが、TDRとWavePulser 40iXやベクトルネットワークアナライザ(VNA)などのSパラメータを測定する製品の違いについて、実践的にレビューしていきます。(日本語、60分)
Dec 7 ,2022
Become an Expert in Measurement-Simulation Correlation for High-speed Serial Data Links
Join Teledyne LeCroy, Professor Eric Bogatin and Ansys to learn best practices and measurement and simulation processes critical in designing high-speed serial data links. The process and best practices will be described, and a well-characterized test device will be used with a measurement-simulation correlation to validate the process.
Nov 30 ,2022
Advanced Course on Serial Data Jitter Measurements
In Part 7 of our Jitter University Webinar Series we dive deeper into the various measured and extrapolated jitter views, explain statistical and time-varying views of jitter in serial data link margins as viewed with an eye diagram.
Nov 29 ,2022
Introduction to the Five Pillars of Data Acquisition
Join Teledyne SP Device's webinar about data acquisition fundamentals such as analog front-end (AFE), triggering, clocking, signal processing, and the use of general-purpose input/output (GPIO)
Nov 22 ,2022
モータードライブ解析セミナー ~三相パワー解析の基礎と測定例
オシロスコープベースのモータードライブアナライザMDAシリーズで行っている三相パワー解析の計算処理、実際の測定シーンの動画を交え、モータードライブ解析の基礎をご紹介いたします。(日本語、17分)
Nov 18 ,2022
Threading the 802.15.4 Stack
Join Teledyne LeCroy for an in-depth webinar on analyzing the Thread and 802.15.4 stack with a specific focus on debugging and troubleshooting. We explain the protocol layers and describe our tools for exploring the technology.
Nov 17 ,2022
Using Oscilloscope Digital Filters to Remove Undesirable Signal Components
In Part 11 of our Oscilloscope Coffee Break Webinar Series we describe how to remove undesirable signal components in oscilloscope acquired signals through the use of digital filters.
Nov 16 ,2022
How to Perform USB4 Electrical Compliance Testing
Join Teledyne LeCroy for this live demonstration of USB4® electrical compliance testing. In this webinar we will demonstrate everything a Test or Validation Engineer will need to do to perform USB4 electrical compliance testing.
Nov 9 ,2022
PCI Expressのリンクトレーニングと他の動的リンク動作のデバッグ法
今回のセミナー前半はPCI Expressの概要、リンクトレーニングの簡単な概要を説明します。後半はインターフェイスの様々な階層にまたがるPCI Expressのデバッグについて解説し、これらの問題に取り組むテレダイン・レクロイ独自の方法をご紹介します。 (日本語、58分)
Nov 8 ,2022
Fundamentals of 10 Mb/s In-vehicle Networks
Get a background on the evolution of 10 Mb/s automotive serial data, strengths and weaknesses of new standards, and using oscilloscopes for validation and debugging of serial data traffic.
Nov 3 ,2022
Creating a Strategy for Bluetooth Interoperability Testing
Join Teledyne LeCroy for an in-depth webinar on creating a strategy for interoperability testing, focused on Bluetooth. We explore why testing should be performed, ways to develop a test strategy, and capturing the data and analysis of discovered issues.
Nov 2 ,2022
How to De-embed and Emulate Serial Data Links Using Oscilloscopes
Join Teledyne LeCroy to learn about the various oscilloscope de-embedding and embedding/emulation techniques for high-speed serial data links, interconnects, and channels and oscilloscope probes.
Oct 27 ,2022
Zooming With an Oscilloscope – Zoom Waveforms and Timebase Adjustment
In Part 10 of our Oscilloscope Coffee Break Webinar Series we describe how to view timing details of your acquired signals through the use of both horizontal zoom controls and changes to timebase and delay settings. We will compare and contrast the two methods.
Oct 26 ,2022
Serial Data Jitter Separation, Extrapolation, and Jitter Views
In Part 6 of our Jitter University Webinar Series we describe what total jitter at a given bit error rate (Tj@BER) is and how it is derived from time interval error (TIE) measurements using extrapolation models. Random jitter (Rj) and deterministic (Dj) separation is explained, with further explanation of Dj separation into data dependent jitter (DDj), duty cycle distortion (DCD), intersymbol interference (ISI), bounded uncorrelated jitter (BUj) and periodic jitter (Pj), with examples provided.
Oct 26 ,2022
Part 2 - Making Auto-Negotiation & Link Training Reliable and Why It Matters
Join UNH-IOL and Teledyne LeCroy as they dive deeper into details of Auto-Negotiation (ANEG) and Link Training (LT). During our last webinar, there were many good questions bringing up new topics, which we discuss in more depth. In addition, reiterate how successful ANEG and LT have shown to reduce overall installation time while minimizing the risk of ongoing mistakes.
Oct 26 ,2022
USB Type-C技術セミナーシリーズ パート4: USB4 とUSB 3.2 のPHY Logic 層デバッグ
このセミナーはUSB Type-C技術に関する新しいシリーズで、USB 3.2, USB4™, Thunderbolt™ 3, DisplayPort™, USB4 Type-C sideband (USB Power Delivery, DisplayPort AUX, USB4 SB) テストまで、物理層に重点を置いて解説します。 今回はUSB4とUSB3.2のPHY-Logic層とサイドバンド不良のデバッグ方法を取り上げます。(日本語、47分)
Oct 12 ,2022
How to Perform PCI Express® 5.0 PHY Compliance Testing
Join Teledyne LeCroy for this live demonstration of PCI Express 5.0 Electrical Compliance Testing. In this webinar we will demonstrate everything a Test or Validation Engineer will need to do to perform PCIe® 5.0 CEM physical layer/electrical compliance testing.
Oct 12 ,2022
オシロスコープ使いこなしセミナー 第三回 入門編(2)
入門編(2)としてテレダイン・レクロイ製オシロスコープの操作の基本について引き続き学びます。1)ばえるレポートの作り方! 2)時短!手間なし!知って得するトリガ操作(日本語、60分)
Oct 6 ,2022
Become an Expert on Channel Operating Margin (COM) and Understanding Its Impact on Oscilloscope Eye Diagrams
Join Teledyne LeCroy, Siemens EDA and Professor Eric Bogatin to learn best practices to reduce artifacts when calculating the channel operating margin (COM) using an S-parameter file for a serial data link. Attendees will learn what COM really means, what features in your serial data link affect the COM and the right ways to correlate COM value and oscilloscope eye diagrams.
Oct 5 ,2022
オシロスコープを使った組み込みシステムのデバッグ パート2:高度な計測と演算の基礎
このシリーズの目的は、組み込み機器設計におけるアナログ、デジタル、シリアル・データ、およびセンサ信号の相互作用の評価とトラブルシューティングに関する知識と効率を向上させることです。 第2回目となる今回のセッションでは、組み込みシステム設計における信号振幅やタイミングのエラーを分離・特定するための計測、波形演算、解析を実行するためのスキルを学びます。(日本語、60分)
Sep 30 ,2022
Bluetooth® LE Debugging and Regression Testing
Join Teledyne LeCroy for an in-depth webinar on Bluetooth Low Energy testing. We explore the testing required for Bluetooth SIG HCI/LL qualification and ongoing compliance.
Sep 29 ,2022
How to Use an Oscilloscope to Confirm Pulse-width Modulation (PWM) Envelopes
In Part 9 of our Oscilloscope Coffee Break Webinar Series we describe how to use your oscilloscope to monitor PWM signals and demodulate them to display modulation envelopes, which can be compared to control system inputs and system operation expectations.
Sep 27 ,2022
Introduction to High-Level Synthesis (HLS)
Join Teledyne SP Devices for an introductory webinar on HLS in the context of high-performance digitizers.
Sep 21 ,2022
Fundamentals of Serial Data Jitter Measurements
In Part 5 of our Jitter University Webinar Series we focus on the details of the time interval error (TIE) measurement that is the foundation for extrapolated jitter calculations on non-return to zero (NRZ) serial data signals. We describe a typical serial data link, and provide foundational knowledge about the impact that link has on jitter measurement and extrapolation methodologies.
Sep 14 ,2022
How to Perform DisplayPort™ 2.0 Physical Layer Compliance Testing and Debug
In Part 5 of our USB Type-C® Technologies Webinar Series we review the latest PHY test requirements for DisplayPort 2.0 including Source and Sink test updates and new VESA compliance program requirements.
Sep 14 ,2022
プローブ入門
●基本のパッシブプローブについて学ぼう -プロープとは何だろう? -プローブをオシロスコープに接続する -プローブには調整が必要 他 ●その他のシングルエンドプローブ ●先端アタッチメントに注意 ●差動プローブ ●電流プローブ(日本語、24分)
Sep 8 ,2022
Bluetooth® Coffee Break Series Part 4: Bluetooth LE Audio Profiles
In this session we explore the various profiles & services defined in the Generic Audio Framework that is used for rendering & capturing audio, content control, transition & coordination control, and stream control.
Sep 7 ,2022
USB Type-C技術セミナーシリーズ パート3:USB4™ および Thunderbolt 3/4 物理層のコンプライアンス・テスト
このセミナーはUSB Type-C技術に関する新しいシリーズで、USB 3.2, USB4™, Thunderbolt™ 3, DisplayPort™, USB4 Type-C sideband (USB Power Delivery, DisplayPort AUX, USB4 SB) テストまで、物理層に重点を置いて解説します。 今回はUSB仕様の最新規格となる、USB4とThunderbolt3、およびThunderbolt4を取り上げます。 (日本語、40分)
Sep 1 ,2022
Bluetooth® Coffee Break Series Part 3: Auracast™
In this session we take a deeper dive onto the transportation of audio from a Auracast™ transmitter (TV) and a receiver (earbuds) through an assistant (phone).
Aug 30 ,2022
PCI Express® 6.0 PAM4 物理層テスト入門
テレダイン・レクロイの PCIe 6.0物理層テストの専門家より、技術者がPCIe5.0からPCIe6.0に移行するときに直面する課題と、これらの課題を克服する方法について説明します。(日本語、50分)
Aug 25 ,2022
Bluetooth® Coffee Break Series Part 2: Unicast Audio Streams
In this session we explore the logical transport layer known as Connected Isochronous Streams (CIS) used to transport audio data.
Aug 25 ,2022
How to Use an Oscilloscope as a Serial Digital-to-Analog Converter (DAC) for Validation and Debug
In Part 8 of our Oscilloscope Coffee Break Webinar Series we describe how the oscilloscope may be used to extract analog data values from serial data digital messages for the purposes of validating and debugging digital data transmissions.
Aug 25 ,2022
オシロスコープ使いこなしセミナー 第二回 プローブ編
テレダイン・レクロイ製オシロスコープの使い方の基本から、テレダイン・レクロイのオシロスコープならではの高度な機能まで幅広く知っていただくためのセミナーを開催いたします。 第二回目は、テレダイン・レクロイのオシロスコープで使える最も基本的なパッシブプローブから、高電圧、高周波、光絶縁や電流プローブまでの様々なプローブについて、原理や安全で正確な測定のための使い方について学びます。(日本語、60分)
Aug 24 ,2022
Making Auto-Negotiation & Link Training Reliable and Why It Matters
Join University of New Hampshire InterOperability Laboratory and Teledyne LeCroy as they break down Auto-Negotiation (ANEG) and Link Training (LT) by addressing common issues folks may run into during testing.
Aug 18 ,2022
Bluetooth® Coffee Break Series Part 1: Introduction to Bluetooth LE Audio
In this session we go over the architectural overview of Bluetooth LE Audio.
Aug 17 ,2022
Get ready for PCI Express® Integrity and Data Encryption (IDE) Protocol Test
View our webinar for an overview of Integrity and Data Encryption (IDE) capabilities, hardware test requirements, and decoding and debugging PCIe® IDE situations.
Aug 10 ,2022
How to Validate Auto-Negotiation and Link Training in PAM4 and NRZ Ethernet Connections
This webinar introduces the viewer to the SierraNet protocol analysis tools for validating Ethernet connections, starting with Auto-negotiation and Link Training (AN/LT) conformance and discusses some of the interoperability challenges faced by developers.
Aug 3 ,2022
USB Type-C技術セミナーシリーズ パート2:USB3.2 物理層 コンプライアンステストの概要
USBペリフェラルに広く使用されているUSB 3.2の仕様に焦点を当てます。USB 3.2 CTSの新しいテスト要件とそれをテストするためのツールについて説明します。(日本語、42分)
Aug 1 ,2022
測定精度を高めるための「デジタル・オシロスコープ」基礎知識
製造現場や研究開発の現場に欠かせない「デジタル・オシロスコープ」。実は基礎を押さえておかないと、正確な測定を行うことはできません。本ウェビナーでは、正しい測定を行うためのコツ・注意点を初心者向けに解説します。(日本語、37分)
Jul 28 ,2022
Incorporating Automated Testing Into Your Product Test Strategy
Explore the fundamentals of testing types, how testing fits within the product lifecycle and when to use automated versus manual testing.
Jul 28 ,2022
How to Use Oscilloscope Track or Time Trends for Debugging
In Part 7 of our Oscilloscope Coffee Break Webinar Series we review how to to use an oscilloscope’s measurements and track or time trend functions to quickly identify circuit issues and unexpected signal behaviors.
Jul 27 ,2022
How to Debug USB4™ and USB 3.2 PHY-logic and Sideband Links
In Part 4 of our USB Type-C® Technologies Webinar Series we will focus on compliance and interoperability (C&I) of USB Type-C connected hosts, hubs, adapters, and peripherals, with practical approaches to debugging electrical system issues that may occur when connecting USB-C devices together and meeting all USB-IF and Thunderbolt Specifications.
Jul 20 ,2022
Four Tips for High Bandwidth Connector Crosstalk Characterization
Attendees of this webinar will learn what the most important figures of merit are for crosstalk in connectors and how to perform reliable measurements for typical connector systems.
Jul 15 ,2022
USB Type-C技術セミナーシリーズ パート1:USB Type-C物理層テスト入門
このセミナーはUSB Type-C技術に関する新しいシリーズで、USB 3.2, USB4™, Thunderbolt™ 3, DisplayPort™, USB4 Type-C sideband (USB Power Delivery, DisplayPort AUX, USB4 SB) テストまで、物理層に重点を置いて解説します。 USB Type-Cは高速データ、ディスプレイ、電源供給が集約されたコネクタで、急速にPC業界の標準になりつつあります。本セッションでは、USB Type-Cコネクタで送信されるすべての電気信号の概要とそのテスト方法について説明します。(日本語、46分)
Jul 13 ,2022
Practical Jitter Debug and Measurement Examples
In Part 4 of our Jitter University Webinar Series we introduce spectral analysis of jitter as a debug tool and provide other practical examples of using statistical and time domain analysis tools in the oscilloscope to uncover the root cause of jitter problems.
Jul 12 ,2022
New Flexibility, Sideband and Power Features for Gen5 SSD Testing
View Teledyne LeCroy's in-depth webinar on OakGate’s new Gen5 SSD Test Solutions. The solutions have been re-designed and re-engineered from the bottom up to give SSD Validation Engineers more flexibility and access to the new sideband and power capabilities.
Jul 8 ,2022
オシロスコープを使った組み込みシステムのデバッグ パート 1:信号の表示と測定の基礎
このセミナーは、オシロスコープを使用して効率的かつ正確に組み込みシステムをデバッグする方法について、3回に分けてご紹介するオンライン・セミナー・シリーズの第1回目です。 このシリーズの目的は、組み込み機器設計におけるアナログ、デジタル、シリアル・データ、およびセンサ信号の相互作用の評価とトラブルシューティングに関する知識と効率を向上させることです。 オシロスコープで使用できるさまざまな信号表示ツールと、測定ツールについて説明します。また、不正確な測定や非効率な測定につながるトラップや落とし穴を回避する方法についても説明します。(日本語、65分)
Jun 30 ,2022
How to Use Statistical Data and Histograms in Your Oscilloscope
In Part 6 of our Oscilloscope Coffee Break Webinar Series we describe how to quickly identify circuit issues through the oscilloscope’s measurements, measurement statistics and statistical measurement distributions (histograms).
Jun 29 ,2022
USB4™ and Thunderbolt™ 3/4 Physical Layer Compliance Test Overview
In Part 3 of our USB Type-C® Technologies Webinar Series we will provide an update of the latest tools available for USB4 electrical validation and compliance testing and requirements to adhere to the USB-IF’s test program.
Jun 28 ,2022
Introduction to Pulse Detection Range Extension (PDRX)
Join Teledyne SP Devices for an introduction to our Pulse Detection Range eXtension (PDRX) technology. It achieves a dynamic range equivalent to 16-bit analog-to-digital converters (ADCs) while exceeding the sampling rate supported by commercially available devices.
Jun 22 ,2022
Automating Your DisplayPort Testing with the Teledyne LeCroy API
This webinar describes the capabilities of the Teledyne LeCroy Application Programming Interface (API) for controlling the quantumdata M42d/M41d and 980 series DisplayPort test instruments.
Jun 16 ,2022
USB PD Compliance Guided Tour
Go under-the-hood with the new “merged” PD 3.1 compliance test procedure. This detailed webinar provides an insider’s view of the new and improved PD testing process.
Jun 15 ,2022
Taking the Long View of Jitter
In Part 3 of our Jitter University Webinar Series we leverage the use of modern digital oscilloscopes to make more jitter measurements faster and more accurately.
Jun 14 ,2022
Three Design Tricks to Reduce Switching Noise in Printed Circuit Boards
Switching noise is the most common source of noise in all digital circuits. In this webinar Prof. Eric Bogatin will show you 3 design principles that can dramatically reduce switching noise.
Jun 9 ,2022
オシロスコープ使いこなしセミナー 第一回 入門編(1)
デジタルオシロの動作とレクロイオシロの基本操作 テレダイン・レクロイ製オシロスコープの使い方の基本からテレダイン・レクロイのオシロスコープならではの高度な機能まで幅広く知っていただくためのセミナーとなります。 第一回目は入門編としてデジタル・オシロスコープの動作の解説、基本操作として水平軸操作、垂直軸操作、トリガ操作を中心に学びます。(日本語、60分)
Jun 8 ,2022
High Voltage Probe Real-world Examples and Comparisons
In Part 2 of our Probing in Power Electronics webinar series we provide real-world application examples and high voltage probe comparisons to highlight the practical impact of each type’s strengths and weaknesses in different application examples.
Jun 7 ,2022
Introduction to PCI Express® 6.0 PAM4 Physical Layer Testing
Join Teledyne LeCroy PCIe 6.0 physical-layer test experts explain the challenges that early adopters will face when moving from PCIe 5.0 to PCIe 6.0 and how to overcome these challenges.
Jun 1 ,2022
EV用インバータ、モーターシステムのデバッグ オシロスコープベースのモータシステム解析
(ITmediaVirtual EXPO 2022春 ブース内講演動画) 昨今のEV化の状況ですが、以前の予測をはるかに超えるEV化の加速がすすんでいます。これまで特にEU各国での動きがけん引してきましたが日本でも今年後半になって大きな発表がありさらに前倒しでEVシフトが進みそうです。 EV、あるいはハイブリッドのみならずガソリンエンジン車においても内部には様々なモーターが使用されておりそれらのデバッグには専用の機器が必要となります。特に定常状態のカタログ仕様適合を評価するのではなくトラブル状態のデバッグや最適化されてないシステムのチューニングには従来使用されてきた測定機器では機能が不足してきます。 この講演ではEV用インバータ、モーターシステムのデバッグについてご紹介します。(日本語、9分)
May 31 ,2022
Automating Your HDMI Testing with the Teledyne LeCroy API
This webinar describes the capabilities of the Teledyne LeCroy Application Programming Interface (API) for controlling the quantumdata 980 and M41h series test instruments.
May 26 ,2022
Path to Bluetooth Qualification
Join Teledyne LeCroy for a webinar on the Path to Bluetooth RF Qualification. We explore the technologies, documentation, process and testing for qualifying a Bluetooth product with a focus on the Bluetooth SIG’s RF requirements.
May 26 ,2022
How to Set Up an FFT for Frequency-domain Analysis
In Part 5 of our Oscilloscope Coffee Break Webinar Series we describe the insight that can be gained by looking at signal captures in the spectral rather than time domain.
May 25 ,2022
USB 3.2 Physical Layer Compliance Test Overview
In Part 2 of our USB Type-C® Technologies Webinar Series we focus on the USB 3.2 specification given its ubiquitous use for USB peripherals. We will cover new test requirements for the USB 3.2 CTS and the tools for testing it.
May 20 ,2022
Decoding Proprietary Bluetooth LE Data over GATT
Learn how to write your own decodes for Teledyne LeCroy (Frontline) Bluetooth analyzer decoding. When you capture proprietary data contained in Bluetooth packet payload, you need to add new decodes to read the proprietary content. Write your own decodes and now you can read/decode the full packet content.
May 17 ,2022
How to Choose the Correct High Voltage Probe
In Part 1 of our Probing in Power Electronics webinar series we explain the different types of High Voltage probes and how to choose the best probe for the specific application.
May 12 ,2022
PCI Express 5.0 コンプライアンス・テスト Part 2: 電気コンプライアンス・テストの概要
テレダイン・レクロイには、物理層テスト用のオシロスコープやプロトコル層テスト用のプロトコルアナライザなど、幅広いテストツールがあり、これらの機器は、今日のエレクトロニクスで使用されている一般的なシリアル・データ規格のをテストするために使用されます。 PCI Expressの電気的コンプライアンステストについては、学ぶべき多くの技術情報がありますが、このオンライン・セミナーでは、デバイスをコンプライアンス・ワークショップに持ち込む準備について解説します。(日本語、40分)
May 4 ,2022
Learning About Jitter on the Edge
In Part 2 of our Jitter University Webinar Series we illustrate examples of measuring jitter using acquisitions comprised of one or two edges.
May 4 ,2022
How to verify and diagnose problems in MIPI DSI Display Integration
This webinar identifies areas of concern when integrating MIPI DSI Displays with Host Processors.
Apr 28 ,2022
50 Ω or 1 MΩ Coupling? That is the Question.
In Part 4 of our Oscilloscope Coffee Break Webinar Series we explore what oscilloscope input termination is best – 1 MΩ or 50 Ω? When should you use one over the other?
Apr 20 ,2022
Introduction to USB Type-C® Physical Layer Testing
In Part 1 of our USB Type-C® Technologies Webinar Series we will provide an overview of all the electrical signals sent over the USB Type-C connector and how to test them.
Apr 13 ,2022
How to Debug PCI Express® Link Training and Other Dynamic Link Behaviors
Do you struggle to debug PCIe® interactions between protocol and electrical behaviors during link training and data rate changes? Join us to learn advanced debugging techniques that can drastically improve time-to-market.
Apr 7 ,2022
デジタル・オシロスコープ入門
テレダイン・レクロイの「デジタル・オシロスコープ入門」という小冊子は、長年に渡ってご好評を頂いておりますが、本セミナーでは、この小冊子に沿った内容を分かりやすく解説したものとなっています。初級者に限らず、中級者以上の方にも復習としておすすめのセミナーです。(日本語、35分)
Apr 6 ,2022
Introduction to Jitter
In Part 1 of our Jitter University Webinar Series we provide basic jitter definitions and categories, describe the types of instruments historically and currently used to measure jitter, and jitter measurement instrument strengths and weaknesses.
Mar 31 ,2022
How to Test Low-speed Serial Data Signal Integrity with Eye Diagrams
In Part 3 of our Oscilloscope Coffee Break Webinar Series we describe how to use your oscilloscope to perform quick and simple signal integrity tests on your low-speed serial data signals using eye diagrams.
Mar 29 ,2022
Pulse detection in the presence of noise
Join Teledyne SP Devices for an introductory webinar providing technical insight and practical advice on how to improve triggered acquisition of weak signals in the presence of noise.
Mar 24 ,2022
Wireless Coexistence Challenge
View our in-depth webinar to explore the Wireless Coexistence challenge and how developers can mitigate the risks using the latest Teledyne test tools and Wireless Protocol Suite software via a live demo.
Mar 16 ,2022
PCI Express® 5.0 Electrical Compliance Test Overview
In Part Two of our PCI Express 5.0 Compliance Test Overview Webinar series we describe the new PCIe® 5.0 electrical compliance test procedures – what’s new, what’s the same as past generations, and how to avoid the most common test pitfalls.
Mar 16 ,2022
Compliance Testing for DisplayPort Link Training Tunable Phy Repeater (LTTPR) Devices
This webinar covers the operation of DisplayPort 2.0 Link Layer Protocols with LTTPR devices in a UHBR network and how to test LTTPR-capable devices for compliance.
Mar 9 ,2022
PCI Express® 5.0 Protocol Compliance Test Overview
In Part One of our PCI Express 5.0 Compliance Test Overview Webinar series we discuss the PCI Express 5.0 tests specified for the Logical PHY, Data Link Layer and Transaction Layers.
Feb 25 ,2022
Advantages of Pre-Qualification for Bluetooth® Products
View our webinar on the Advantages of Pre-qualification and with a focus on Bluetooth. We explore the technologies and testing using the latest Frontline hardware and software.
Feb 24 ,2022
How to Deskew Your Oscilloscope Probes for Best Accuracy
In Part 2 of our Oscilloscope Coffee Break Webinar Series we explain deskewing to eliminate timing errors. Propagation delay differences between your probes and/or channels may affect timing measurement accuracy. Methods to minimize these errors will be described.
Feb 24 ,2022
Essentials of DisplayPort Adaptive Sync Testing
This webinar covers the DisplayPort adaptive sync function in both source devices and sink devices and how to verify these functions through compliance testing.
Feb 18 ,2022
Next Generation Bluetooth® Audio: LE Audio
Watch our in-depth webinar on – the next generation of Bluetooth® Audio: LE Audio. We explore this topic using the latest Wireless Protocol Suite software and real captured data.
Feb 16 ,2022
パッシブ/アクティブ・プロービング技術とトレードオフ パート2
本セミナーは2部構成となっており、オシロスコープで測定を行う際にどのようなプローブを用いるべきか、プロービングの手法とトレードオフについて説明いたします。(日本語、39分)
Feb 15 ,2022
Analyzing Electronic Warfare Signals with Oscilloscopes - Part 2
In Part 2 of our webinar series we describe how to implement custom algorithms for classified signal analysis, and showcase advanced application-specific examples of electronic warfare signal analysis.
Jan 27 ,2022
Five Tips to Improve Your Oscilloscope Resolution and Dynamic Range
In Part 1 of our Oscilloscope Coffee Break Webinar Series we recommend five tips and best practices on how to get the best measurement accuracy and performance by using your oscilloscope’s full dynamic range, whether that is 8, 10, or 12 bits of resolution.
Jan 26 ,2022
Analyzing Electronic Warfare Signals with Oscilloscopes Part One
In Part 1 of our webinar series learn how to effectively and efficiently use oscilloscopes to characterize, understand and debug electronic warfare (EW) signals
Jan 19 ,2022
Qualifying NVMe™ Drives in a Zero Trust World
Join OakGate Technology, Teledyne LeCroy and Eclypsium, a leading security company, for an in-depth webinar on drive qualification best practices for a “zero trust” environment. We discuss DMA and Firmware level attacks, Zero Trust, recommended actions to implement a robust security model and more.
Jan 18 ,2022
Essentials of DisplayPort Adaptive Sync Testing
This webinar covers the DisplayPort adaptive sync function in both source devices and sink devices and how to verify these functions through compliance testing.
Jan 12 ,2022
Passive and Active Probing Techniques and Tradeoffs - What to Use and Why - Part Two
Learn how to choose the right probe for a particular measurement, and optimize the use of that probe for the highest signal fidelity.
Jan 12 ,2022
パッシブ/アクティブ・プロービング技術とトレードオフ パート1
本セミナーは2部構成となっており、オシロスコープで測定を行う際にどのようなプローブを用いるべきか、プロービングの手法とトレードオフについて説明いたします。(日本語、43分)
Jan 11 ,2022
USB Power Delivery 3.1 Round-up
Catch up on the latest Power Delivery 3.1 enhancements and changes. This comprehensive technical training looks back at the evolution of USB Power Delivery, the world-wide standard for USB charging and power.
Dec 16 ,2021
Oscilloscope Coffee Break Series - Part 12: Validating For 1% Noise Margin
In this session we will investigate how our oscilloscope measurement tools can support us to reach that 1% power supply output noise margin.
Dec 16 ,2021
CXL Protocol Test and Debug
Join Teledyne LeCroy for an in-depth webinar on CXL protocol test and debug using the Teledyne LeCroy Summit series Protocol Analyzers and Exercisers. Learn more about CXL protocol, a technology that introduces several new features to increase bandwidth for Memory and Cache applications.
Dec 15 ,2021
How to Perform USB 3.2 Physical Layer Compliance Testing
Join Teledyne LeCroy for this live demonstration of USB 3.2 Electrical Compliance Testing.
Dec 9 ,2021
What Do I Need and Why – TDR, S-parameters, or Both?
Join Professor Eric Bogatin and Teledyne LeCroy and learn what information can be obtained from a TDR and VNA and how to choose the right tool for your application.
Dec 7 ,2021
Practical On-die Power Integrity Measurements
Part 8: How to Become an Expert in Power Integrity Testing In this webinar Dr. Eric Bogatin describes the direct measurement of power rail noise on the chip itself (i.e. on die)
Dec 2 ,2021
Passive and Active Probing Techniques and Tradeoffs - What to Use and Why - Part One
Learn how to choose the right probe for a particular measurement, and optimize the use of that probe for the highest signal fidelity.
Dec 1 ,2021
How to Perform PCI Express 4.0 Compliance Testing
In this webinar we demonstrate everything a Test or Validation Engineer will need to do to perform PCIe 4.0 CEM compliance testing.
Nov 18 ,2021
Oscilloscope Coffee Break Series - Part 11: Finding High Frequency Noise
In this session we will use our oscilloscope tools and probes to gain an understanding of potential crosstalk or conducted emissions on our power supply circuits.
Nov 16 ,2021
Don’t Let Ground Bounce Ruin Your Day
Part 7: How to Become an Expert in Power Integrity Testing In this webinar Dr. Eric Bogatin looks at the principles behind the root cause of ground bounce, how we can measure the ground bounce in your system, and based on the root cause, how we can design ground bounce out of your next product.
Nov 11 ,2021
DisplayPort 2.0 PHY Compliance Test Overview
Part 2: Compliance Test Overview Webinar Series
In this webinar we will review the latest PHY test requirements DisplayPort 2.0. Source and Sink test updates and new VESA compliance program requirements.
Nov 10 ,2021
DisplayPort 2.0 Protocol Compliance Test Overview
Part 1: Compliance Test Overview Webinar Series
In this webinar we will review the new DisplayPort 2.0 protocols operating at the UHBR rates up to 20G using the new 128b/132b line coding. This webinar will be of interest to engineers developing DisplayPort 2.0 products and devices.
Nov 9 ,2021
Advanced EMC/EMI Pulse Measurement Techniques and Examples
Join us as we provide techniques and examples for measuring and debugging Electrical Fast Transient (EFT) and other complex measurement examples, including damped sinusoid, multiple bursts, and momentary power interruption.
Nov 8 ,2021
TDR を用いた信号品質問題のデバッグ ~信号経路における不良個所の特定
信号が高速化すると、様々な原因によって信号に歪を生じ、通信エラーを引き起こすことが心配されます。 プリント基板をなどの信号経路に問題がある場合も散見されますが、このような事例ではTDRが有効なデバッグ手法となります。 今回は、TDRを用いた信号品質問題のデバッグと題して、その原理から測定手法をご紹介します。(日本語、45分)
Nov 4 ,2021
Bluetooth® RF Testing
Join Teledyne LeCroy for an in-depth webinar on Introduction to Bluetooth Radio Frequency testing. We explore the testing required for Bluetooth SIG Validation testing.
Nov 3 ,2021
End-to-End NVMe Debugging
Join OakGate Technology, Teledyne LeCroy for an in-depth webinar to help improve your ability to find and troubleshoot errors using cross triggers with the Teledyne LeCroy’s OakGate Test Appliances and the Summit series Protocol Analyzers.
Nov 2 ,2021
Essentials of HDMI 2.1 Fixed Rate Link (FRL) Forward Error Correction (FEC) Protocols
This webinar will provide an overview of the HDMI 2.1 Forward Error Correction (FEC) main link protocols. The webinar will also discuss how FEC is enable during transactions over the DDC channel.
Oct 28 ,2021
Wireless Coexistence Challenge
Join our in-depth webinar to explore the Wireless Coexistence challenge and how developers can mitigate the risks using the latest Teledyne test tools and Wireless Protocol Suite software via a live demo.
Oct 28 ,2021
Oscilloscope Coffee Break Series - Part 10: Measuring Transient Response Droop Level
In this session we discuss the best practices and techniques for measuring a power supply’s response to transient events.
Oct 26 ,2021
Real-time Spectral Analysis of Power Rails
Part 6: How to Become an Expert in Power Integrity Testing In this webinar Prof. Eric Bogatin explains and demonstrate how transforming acquired time-domain signals into the frequency domain will get you to the right answer faster, extract the important figures of merit of the signal, and help you find the root cause of a problem.
Oct 20 ,2021
How to Optimize Your Oscilloscope for Basic EMC/ESD Pulse Measurements
Join us for an overview of the basic EMC/ESD pulse definitions with practical best practice measurement examples using the oscilloscope measurement and analysis tools. Several real-world application examples are also provided and explained.
Oct 13 ,2021
How to Save Results and Data on Teledyne LeCroy Oscilloscopes
Leverage the full power of your Teledyne LeCroy oscilloscope to save results and data for use/analysis in other software applications, or for recall into your or a colleague’s Teledyne LeCroy oscilloscope or Teledyne LeCroy’s MAUI® Studio Pro.
Oct 12 ,2021
High-Performance Digitizer Basics
Join Teledyne SP Devices for part 1,2 and 3 on demand webinar introductory series on high-performance digitizers.
Oct 6 ,2021
ジッタ測定入門 ~ジッタを正しく理解する
シリアル・インタフェースの評価で重要な測定項目となっているジッタですが、その振る舞いを深く理解してはいないように思います。ここでは、ジッタとは何かという原点から最新の測定手法までを紹介します(日本語、32分)
Oct 5 ,2021
5 Tips for Power Integrity Debug
Part 5: How to Become an Expert in Power Integrity Testing In this session, Dr. Eric Bogatin will begin to steer our webinar series from fundamentals to detailed real-world advice to help you debug power integrity problems faster. With demonstrations on a microcontroller board, Eric will demonstrate five techniques you can use with any real time scope to analyze the power rail and uncover common problems in the design and interpretation of the power rail.
Sep 30 ,2021
Oscilloscope Coffee Break Series - Part 9: Finding Root Cause of Intermittent Failures
In this session we focus on oscilloscope tools to help us identify measurement outliers, confirm their rate of occurrence, and determine root causes when running circuit validation tests.
Sep 28 ,2021
Essentials of DisplayPort 2.0 Link Layer Protocols with Tunable Phy Repeater (LTTPR) Devices
This webinar covers the operation of DisplayPort 2.0 Link Layer Protocols with LTTPR devices in the network. Viewers will learn about the changes in Link Layer protocols and Link Training with DisplayPort 2.0 UHBR rates and Line Coding.
Sep 23 ,2021
Essentials of USB Power Delivery V3.1 and Extended Power Range
Join this first ever webinar on USB Power Delivery's new Extended Power Range technology. USB PD Revision 3.1 now enables up to 48 V and 240 W of power over the USB Type-C® cable. This technical webinar drills-down on the EPR protocol.
Sep 23 ,2021
Examining and Confirming Auto-negotiation and Link Training for 400Gb Ethernet Connections
This webinar illustrates the value of the SierraNet protocol analysis tools for validating Ethernet connections, looking deeper into AN/LT conformance and discussing some of the complexities.
Sep 16 ,2021
SI/PI Measurements on a Budget
Part 4: How to Become an Expert in Power Integrity Testing In this webinar we show you how you get the most out of your oscilloscope for power integrity measurements without spending a lot of money, including the right way you can do five common SI and PI measurements with a budget scope.
Sep 16 ,2021
PCI Express® 5.0 Protocol Compliance Test Overview
Part 2: PCI Express® 5.0 Compliance Test Overview
In this webinar we discuss the PCI Express 5.0 tests specified for the Logical PHY, Data Link Layer and Transaction Layers.
Sep 8 ,2021
Advanced Control and Programming of Teledyne LeCroy Oscilloscopes
In this webinar we focus on using remote control commands with Teledyne LeCroy oscilloscopes to achieve more powerful automation.
Sep 1 ,2021
お手持ちのPCによるオシロスコープの波形解析~MAUI Studioを使ったオフライン解析
ご自宅などでのリモートワークを支援するテレダイン・レクロイのオシロスコープのオフライン・データ解析について学びたいと思います。お手持ちのPCでオシロスコープの波形解析がどんな風にできるかデモを交えて紹介します(日本語、47分)
Aug 26 ,2021
Oscilloscope Coffee Break Series - Part 8: Measuring Rise Times and Propagation Delays
In this session, we will focus on measuring a power supply’s start up and output performance.
Aug 25 ,2021
Remote Connection and Basic Control of Teledyne LeCroy Oscilloscopes
In this webinar we describe the full range of tools available to connect remotely, perform basic control and acquire data from Teledyne LeCroy oscilloscopes using either commercial off-the-shelf programs or Teledyne LeCroy software.
Aug 25 ,2021
How to verify and diagnose problems in MIPI CSI Image Sensor Integration
This webinar identifies areas of concern when integrating MIPI CSI cameras and Image Sensors. We show how the Teledyne LeCroy Envision X84 Protocol Analyzer and Traffic Generator can ease debug of format and resolution translation.
Aug 18 ,2021
Power Integrity in Multi-rail Embedded Designs Learning Lab
Part 3: How to Become an Expert in Power Integrity Testing In this webinar we demonstrate and teach how to characterize and validate the integrity of multiple power rails in a PDN network, including the interactions and control of VRM’s, POL’s, LDO’s by Power Management ICs in embedded designs.
Aug 17 ,2021
Get Ready for Compute Express Link (CXL) Protocol Compliance Testing
Join Teledyne LeCroy for an in-depth webinar on compliance testing for the new Compute Express Link (CXL) standard. We explore the main features in the CXL Protocol including Alternate Protocol Negotiation, ALMP initialization and Link Enumeration.
Aug 12 ,2021
DisplayPort Link Training Tunable Phy Repeater (LTTPR) Devices
This webinar covers the operation of LTTPR devices in DisplayPort networks. Viewers will learn about LTTPR devices and how the DisplayPort connection sequence operates with LTTPR devices in the network.
Aug 5 ,2021
テレダイン・レクロイ製オシロスコープのリモート接続
コロナ禍の中リモートワークが求められる環境下では、計測器のリモート・コントロールも必須の操作となっています。このセミナーでは、テレダイン・レクロイのオシロスコープのリモート接続について学びたいと思います。(日本語、47分)
Jul 29 ,2021
Advantages of Pre-compliance and Interoperability Testing for Bluetooth® Products
Join Teledyne LeCroy for a webinar on the Advantages of Pre-compliance and Interoperability Testing with a focus on Bluetooth Low Energy.
Jul 29 ,2021
Oscilloscope Coffee Break Series - Part 7: Debugging Noise Reduction of Decoupling Capacitors
In this session we address how do we lower our power supply output noise when changes to the output capacitors made no difference?
Jul 28 ,2021
Best Practices for 48 V Power Conversion Testing
In this webinar we describe new products and best practices and measurement techniques for validation and debug of 48 V power conversion systems.
Jul 22 ,2021
Accurate and Efficient PDN Measurements Learning Lab
Part 2: How to Become an Expert in Power Integrity Testing In this webinar we demonstrate and teach how to make accurate, high bandwidth measurements of power rail voltages and avoid introducing probing artifacts or interference into the measurements.
Jul 21 ,2021
Understanding Real-time Spectral Analysis
Join Eric Bogatin for this webinar as he describes best measurement and analysis practices for signals in the time and frequency domains.
Jul 14 ,2021
오실로스코프 실습 세미나
Jul 14 ,2021
Essentials of DisplayPort 2.0 Link Training Compliance Testing
This webinar covers the DisplayPort Link Training mechanisms and how they are verified for compliance, as well as the sequence of link training and some of the details of the key tests used to verify these new mechanisms.
Jul 13 ,2021
How to Perform Customized Analysis With an Oscilloscope
Part 2: Advanced Customization Examples
In this session we provide specific real-world examples of customization being used to solve specific measurement and control challenges.
Jul 8 ,2021
A New architecture for the next generation of Bluetooth® Audio
Want to learn more about Bluetooth LE Audio and Generic Audio Framework? Join our in-depth webinar where we explore these topics using Wireless Protocol Suite software and real captured data.
Jul 1 ,2021
DDRメモリ物理層テストの基礎
DDRは、パソコンではおなじみのメモリですが、現在DDR4からDDR5へと高速化が進行しています。応用分野はパソコンのみならず組み込み系にも広がっています。メモリの読み書きに用いるインタフェースの動きは独特で評価するにあったっては、その動きを理解する必要があります。今回はその導入部として基礎的な内容を解説します。(日本語、45分)
Jun 24 ,2021
Oscilloscope Coffee Break Series - Part 6: Testing Noisy Power Supply Outputs
In this session we review which probes are best for your application and how best to connect to your oscilloscope to minimize RF pick up.
Jun 22 ,2021
Tips & Tricks – Getting the most out of TeleScan PE software
TeleScan PE is a powerful graphical tool provided free of charge that will help give you visibility and control with your PCIe testing. This webinar will provide an overview of this technology and present how to use this powerful tool.
Jun 17 ,2021
How to Perform Customized Analysis With an Oscilloscope
Part 1: Fundamentals of Customized Analysis
In this session we describe the range of capabilities available to customize measurements, math, and user interface using a Teledyne LeCroy oscilloscope as an example.
Jun 16 ,2021
How to De-embed Interconnect Elements in Both Frequency and Time Domains
In this webinar we demonstrate best practices for de-embedding test fixtures, cables, and probes from serial data link and other signal integrity measurements.
Jun 9 ,2021
What Every Oscilloscope User Needs to Know About Transmission Lines
Join Eric Bogatin and Teledyne LeCroy as we introduce you to five simple, yet essential, principles of signal integrity which we will apply to understanding how to interpret oscilloscope measurements from DC to 1 GHz bandwidth.
Jun 9 ,2021
デジタル・オシロスコープ入門
テレダイン・レクロイの「デジタル・オシロスコープ入門」という小冊子は、長年に渡ってご好評を頂いておりますが、本セミナーでは、この小冊子に沿った内容を分かりやすく解説したものとなっています。初級者に限らず、中級者以上の方にも復習としておすすめのセミナーです。(日本語、34分)
Jun 3 ,2021
Beyond the TDR: Differential and Common impedance, Crosstalk and Mode Conversion
In Part 1 of our High Speed Interconnect Characterization Webinar Series, Eric Bogatin introduces the value of looking at multi-port and mixed-mode TDR and impedance measurements, the best measurement practices and how to analyze the results.
Jun 2 ,2021
Fundamentals of Power Integrity
Part 1: How to Become an Expert in Power Integrity Testing In this webinar we define what power integrity is and why should we care. Attendees will be given a thorough background in power integrity and how to assess it in a design.
May 27 ,2021
Introduction to Phone Projection, CarPlay and Android Auto
Join Teledyne LeCroy for a webinar on Introduction to Phone Projection, CarPlay and Android Auto. We explore the technologies and interoperability testing.
May 26 ,2021
Advanced Testing for ZNS-Enabled Solid-State Drives
Join OakGate Technology, Teledyne LeCroy for an in-depth webinar on Advanced Testing for Zoned Namespace (ZNS) Solid-state Drives (SSDs). The team examines how a ZNS SSD differs from a conventional SSD, its benefits and where the industry is at in terms of readiness. In addition, we review the three options for testing ZNS with the Industry’s leading SSD test and validation software, SVF Pro/Enduro.
May 26 ,2021
Validating Auto-negotiation and Link Training in PAM4 Ethernet Connections
This webinar introduces the viewer to the SierraNet protocol analysis tools for validating Ethernet connections, starting with AN/LT conformance and discussing some of the complexities.
May 26 ,2021
差動プローブを使う48V系電源の正しい測定&評価方法
(パワーエレクトロニクス協会 パワエレ動画集に掲載された動画です)欧州のマイルドハイブリッドをきっかけとして48V系給電システムが採用される動きが高まっています。このシステムには高スルーレートの次世代デバイスが採用されるため、帯域、入力レンジともに48V系にあわせた特性のプローブが必要となります。 今回は業界に先駆けて開発されたテレダイン・レクロイのDL10-HCMプローブと従来型プローブの測定結果を比較します。(日本語11分)
May 20 ,2021
Oscilloscope Coffee Break Series - Part 5: Optimizing Your Vertical Gain
In this session we review your oscilloscope’s vertical gain and why we should care about it.
May 20 ,2021
Best Practices for Validating 64Gb Fibre Channel
This webinar will help you to better understand how to address Fibre Channel issues and will also introduce the viewer to the latest features and updates for SierraNet and the Net Protocol Suite software. Valuable additions to the feature and functions of the SierraNet have been made in recent releases, most significantly for Storage Fabrics, the Fibre Channel Fabric Exerciser.
May 19 ,2021
Mastering the TDR in 45 Minutes
In this webinar Eric Bogatin will show you the right way to think about signals on transmission lines and how to interpret TDR results.
May 18 ,2021
Overview of PCIe® Protocol Analysis in Embedded Systems
Join our webinar where we walk through “PCIe protocol analysis in embedded systems”. You’ll come away with an understanding of PCIe protocol analysis for server and embedded systems, and essential tools required for debugging.
May 13 ,2021
Essentials of High Dynamic Range (HDR) for HDMI™ (Part Two)
Join Teledyne LeCroy with special guest HDR industry expert Joe Kane for a two-part webinar that covers the early evolution of HDR, how it is implemented, technical details and how HDR10 high dynamic range can be evaluated with test patterns and test images.
May 12 ,2021
Protocol Compliance Testing for HDMI 2.1
Part 2: HDMI® 2.1 Compliance Test Overview
In this webinar we will provide an overview of the compliance tests provided to verify the protocol layer as well as audio and video transmission.
May 6 ,2021
DDR Debug Scenarios and Virtual Probing
In Part 4 of our DDR Debug, Compliance & Validation Webinar Series, we demonstrate the utility of DDR eye patterns required for testing and debugging DDR3/LPDDR3 and higher speed DDR4/LPDDR4 signals using real-world DDR debug examples and specialized connectivity examples.
May 6 ,2021
Essentials of High Dynamic Range (HDR) for HDMI™ (Part One)
Join Teledyne LeCroy with special guest HDR industry expert Joe Kane for a two-part webinar that covers the early evolution of HDR, how it is implemented, technical details and how HDR10 high dynamic range can be evaluated with test patterns and test images.
May 5 ,2021
PHY Compliance Testing for HDMI 2.1 and Beyond
Part 1: HDMI® 2.1 Compliance Test Overview
In this session we review the physical layer compliance test requirements of the HDMI 2.1 CTS.
Apr 29 ,2021
Oscilloscope Coffee Break Series - Part 4: Setting up Your Timebase and Using Memory Correctly
In this session we review how to set up your oscilloscope's timebase and take a look at how memory length and sampling rate can impact our results.
Apr 28 ,2021
The Impact of Power Rail Noise on Clock Jitter
In this webinar Eric Bogatin demonstrates how to measure the jitter in both clocks and data and identify the contribution from noise on the power rail.
Apr 27 ,2021
How to Use Oscilloscopes Remotely and Offline
Getting the Most Out of MAUI Studio
In this webinar we describe and demonstrate best practices and capabilities for either using your oscilloscope remotely or analyzing your oscilloscope acquisitions offline on your personal computer.
Apr 23 ,2021
Bluetooth® Low Energy RF PHY Testing
Join Teledyne LeCroy for an in-depth webinar on Introduction to Bluetooth LE Radio Frequency testing. We explore the testing required for Bluetooth SIG Validation.
Apr 14 ,2021
How to Measure Motor Mechanical Speed, Torque and Power Using Digital and Analog Sensors
In Part 6 of our 3-phase Power and Motors Masters Webinar Series we focus on how to use the Motor Drive Analyzer (MDA) to measure motor mechanical shaft speed, torque and angle using a variety of analog, digital and serial data sensors.
Apr 13 ,2021
高分解能オシロスコープの設計手法とその活用例~微小な信号から大きな洞察を得るために
●垂直解像度と設計アプローチ ●実際のデータにおける8ビットと12ビット捕捉の違い ●応用例#1 筋繊維の酸素欠乏 ●応用例#2 医療用エレクトロニクス ●応用例#3 漏電遮断器 ●応用例#4 パワー計測(日本語、30分)
Apr 8 ,2021
Top Tips and Techniques for Better DDR Probing and Testing
In Part 3 of our DDR Debug, Compliance & Validation Webinar Series, we discuss how to address real-world probing and connectivity issues that impact DDR3/LPDDR3 and DDR4/LPDDR4 measurement capabilities. We will provide examples of what to do or not do and a pre-compliance test checklist will be reviewed.
Apr 7 ,2021
How to Perform AC input and Inverter/Drive Output Harmonic Analysis
In Part 5 of our 3-phase Power and Motors Masters Webinar Series we demonstrate how to perform total harmonic distortion (THD) and harmonic analysis on variable frequency waveforms on both AC line (50 or 60 Hz) inputs and variable frequency outputs.
Mar 31 ,2021
How to Measure Power During Volt-second and Other Short Power Periods
In Part 4 of our 3-phase Power and Motors Masters Webinar Series we review examples of power calculated during power periods equivalent to a device switching time.
Mar 30 ,2021
SSD Performance Testing and Analytics for the Data Center
Join OakGate Technology, Teledyne LeCroy and Facebook for an in-depth webinar that explores methods for simulating real-world workloads in the Data Center and employing the power of analytics to identify, characterize and solve performance problems. Workload analytics can also help solid-state device manufacturers improve the performance and functionality of their Enterprise SSDs in Data Center environments.
Mar 25 ,2021
Bluetooth® LE Debugging and Regression Testing
An in-depth webinar on Bluetooth Low Energy testing. We explore the testing required for Bluetooth SIG qualification and ongoing compliance.
Mar 25 ,2021
Oscilloscope Coffee Break Series - Part 3: Getting Your Trigger to Do What You Want
It’s circuit debug time! In this session we use the oscilloscope’s triggering features to define where we start our investigation to find the troublesome circuit issue.
Mar 24 ,2021
4 Practical Real-world Examples of Embedded System Validation and Debug
In Part 3 of our Debugging Embedded Systems with Your Oscilloscope Webinar Series we apply the display, measurement and waveform math tools covered in Part 1 and 2 to specific embedded design application examples.
Mar 23 ,2021
USB4™ Protocol Compliance Testing: A Guided Tour
In this technical webinar, we take an inside look at the USB4 compliance program. This technical tour de force will drill-down on the USB-IF’s Logical and Protocol Layer compliance specifications including key assertions and implementation details.
Mar 18 ,2021
Fundamentals of Advanced Oscilloscope Measurements and Math
In Part 2 of our Debugging Embedded Systems with Your Oscilloscope Webinar Series we develop skills for acquiring and performing measurements, waveform math, and analysis that isolate and help us locate amplitude and timing errors within an embedded design.
Mar 17 ,2021
How to Characterize Lossy Interconnects in High-speed Designs
In this webinar Dr. Eric Bogatin explores the properties of lossy transmission lines and how to extract their important figures of merit.
Mar 11 ,2021
Beyond DDR Compliance Testing — Using Advanced Debug Tools
In Part 2 of our DDR Debug, Compliance & Validation Webinar Series, we review the latest DDR test requirements and provide practical advice on solving test challenges.
Mar 10 ,2021
Fundamentals of Oscilloscope Signal Display and Measurements
In Part 1 of our Debugging Embedded Systems with Your Oscilloscope Webinar Series we discuss the various signal display and measurement tools available in oscilloscopes and how to avoid the traps and pitfalls that lead to inaccurate or inefficient measurements.
Mar 10 ,2021
パワー・エレクトロニクスにおけるプロービング -どのプローブを使うべきか?その理由 パート2
パワーエレクトロニクスでは、取り扱う電圧が高いことや、グランドから浮いている信号の計測など様々な課題があり、これらの課題に対応するプローブを適切に選択し、正しく使用することが必要となります。前回に続き、測定結果を使ってプローブの比較を解説します。(日本語、25分)
Mar 4 ,2021
How to use TDR Technology to Debug and Solve Signal Integrity Impairments
Join Teledyne LeCroy to learn how to measure and analyze impedance on cables, connectors and PCBs using TDR (Time Domain Reflectometry) instruments.
Mar 4 ,2021
64G Fibre Channel is Coming!
Learn more about the tools required to validate end-to-end interoperability and the advancements for Fibre Channel applications added to the Net Protocol Suite.
Feb 25 ,2021
Protocol Analysis using Wireless Protocol Suite
Join Teledyne LeCroy for an in-depth webinar on Protocol Analysis. Presenting Wireless Protocol Suite, a powerful solution for developers working with wireless technologies (Bluetooth LE, BR/EDR, 802.11 ac and 802.15.4) in the 2.4GHz and 5GHz bands. Wireless Protocol Suite provides all the analysis tools you need in a user configurable docking workspace.
Feb 25 ,2021
Oscilloscope Coffee Break Series - Part 2: Optimizing Your Display & Using Cursors and Measurements
In this session, we’ll use the oscilloscope’s display and measurement tools to validate our circuit’s performance and to confirm design margins are being achieved.
Feb 24 ,2021
How to Correlate Control Events to Power Events
In Part 3 of our 3-phase Power and Motors Masters Webinar Series we review examples of using calculated per-cycle power waveforms to validate and debug control system operation to power section behaviors.
Feb 24 ,2021
パワー・エレクトロニクスにおけるプロービング -どのプローブを使うべきか?その理由 パート1
パワーエレクトロニクスでは、取り扱う電圧が高いことや、グランドから浮いている信号の計測など様々な課題があり、これらの課題に対応するプローブを適切に選択し、正しく使用することが必要となります。このセミナーでは2回に分けて、どのようなプローブを選択するべきか、選択の基準をどこに置くべきなのかなどを解説します。(日本語、34分)
Feb 17 ,2021
How to Perform Static and Dynamic Power Analysis
In Part 2 of our 3-phase Power and Motors Masters Webinar Series we describe the differences between static and dynamic power analysis and how to optimize setup and measurement for each.
Feb 17 ,2021
Get Ready for PCI Express® 5.0 Protocol Testing
Join Teledyne LeCroy for an in-depth webinar on testing the new PCI Express 5.0 standard. We explore new features in the PCI Express Protocol including Alternate Protocol Negotiation, Precoding and 32GT/s Link Training mechanisms.
Feb 11 ,2021
Fundamentals of DDR Memory Physical Layer Testing
In Part 1 of our DDR Debug, Compliance & Validation Webinar Series, we provide an overview of DDR interfaces and test challenges with special attention paid to the differences between validation and compliance test requirements, and probing for optimum effectiveness.
Feb 10 ,2021
How to Measure Inverter Subsection Dead-times and Inverter Input/Output Power
In Part 1 of our 3-phase Power and Motors Masters Webinar Series we describe techniques for measuring dead-times for gate-drive signals and device outputs to ensure that margins are achieved.
Feb 10 ,2021
Essentials of HDMI™ Display Stream Compression (DSC) Compliance Testing
This webinar covers HDMI 2.1 FRL Display Stream Compression principles, theory of operation and compliance testing for both source and sink devices.
Feb 4 ,2021
How to Use High Definition Oscilloscopes to Get Big Insight from Small Signals
Join Teledyne LeCroy to learn how to get the most from your high-resolution oscilloscope when measuring small signals.
Feb 2 ,2021
Probing Part 2: Fundamentals of High BW Differential Probes
Serial data bit rates are steadily increasing, which makes signal probing more challenging. We will review during this webinar the impact a probe can have on High speed signals and what happens when the probe is connected on the board. High BW differential probes key specs will be explained as well.
Jan 28 ,2021
Oscilloscope Coffee Break Series - Part 1: Getting Your Oscilloscope Set Up Correctly
In this session we will focus on the key vertical, timebase, and trigger setups that ensure the highest accuracy, precision and efficiency measurements using your oscilloscope.
Jan 27 ,2021
Fundamentals of Characterizing High-speed Serial Data Interconnects
In this webinar, we will discuss S-parameters and impedance profiles and how to interpret them, and then use S-parameter files to make eye diagram and jitter measurements on a differential signal passing through a sample channel.
Jan 27 ,2021
測定する前に、おさえておきたいプローブの基礎
~これだけは分かっておきたいプローブの概要について、分かりやすく解説~ オシロスコープを用いた測定では、使用するプローブの選定と使用方法によっては、期待した信号波形が得られないことがあります。本セミナーでは、一般的なパッシブプローブを取り上げ、測定上注意しなければならない基礎を分かりやすく説明します。(日本語、14分)
Jan 26 ,2021
Probing Part 1: Fundamentals of passive and High Voltage Differential Probes
This is the first one of 2 webinars on probes. During this seminar we will learn what to expect from passive and high voltage probes. How probes are affecting the signal and the circuit under test and which are the intrinsic limits of these probes.
Jan 26 ,2021
최고의 측정 결과를 얻기 위한 오실로스코프 기본 개념
이번 온라인 세미나에서는 오실로스코프에서 사용할 때 최고의 측정 결과를 얻기 위해 알아야 할 기본적인 개념을 다룹니다.
Jan 26 ,2021