LabMaster10Zi-A

Physical Layer Test Solutions

  • PCIe 6.0 64 GT/s Base Tx testing and Rx calibration
  • Automated Tx, Rx and LEQ compliance testing up to PCIe 5.0 32 GT/s
  • Visibility from physical layer through protocol operations
Explore Electrical Test Solutions for PCIe
image description

Protocol Layer Test Solutions

The leading provider of protocol analyzers, exercisers/emulators, jammers and verification/compliance tools

  • Full PCIe specification support
  • Industry leader in PCIe protocol analysis
  • Full range of tools - excercisers, jammers, interposers, etc.
Explore Protocol Test Solutions for PCIe
image description

Testing and Training

Teledyne LeCroy’s Austin Labs is a leading provider of independent testing and training services focused on server, storage, and networking interfaces, including PHY testing and protocols analysis.

  • Intermediate and advanced PCIe training classes - on site, onlocation, and virtual
  • Hardware and device testing services
Explore Austin Labs

PCI Express Product Lifecycle

Teledyne LeCroy has the right test tool for every stage of the product lifecycle and for every layer, from the physical to the application.

Training
image description

Training

To create a reliable product, the user must first understand the technology and know how to use the tools needed to develop, test and debug the relevant PCI Express specification.

Get to know Austin Labs
Prototype

Physical Layer

The first board turn provides the foundation for your design. Teledyne LeCroy’s WavePulser 40iX High-speed Interconnect Analyzer helps quickly and economically identify layout and interconnect issues. High Definition Oscilloscopes from 200 MHz – 8 GHz and power rail probes sniff out power integrity problems.

Featured Products

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • WavePro HD

    Oscilloscope

    Up to 5 Gpt of highly responsive acquisition memory gives more visibility into system behavior, and the exceptional analysis toolbox enables deep insight.

Power On

Physical Layer

8 GHz – 65 GHz high-bandwidth real-time oscilloscopes provide the required performance for multi-lane signal integrity testing at all data rates and all phases of the lifecycle.

Protocol Layer

PCIe Exercisers and Protocol Analyzers provide early status of bus operation and fundamental host device communication.

Featured Products

  • SDA 8 Zi-B

    Oscilloscope

    The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

  • LabMaster 10 Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly more processing power than competitors.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Bring Up

Protocol Layer

Protocol Exercisers, Analyzers and Jammers can provide a full range of testing by identifying any operational issues, emulating devices and systems or injecting errors into the communication path for live traffic testing.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Validation

Protocol Layer

Use of Protocol tools at this stage will ensure high performance error free operation and allow for various forms of corner case and regression testing.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Debug

Physical Layer

Debug state machine and other digital issues using ProtoSync oscilloscope-based Protocol Analysis Software, DH Series Active Differential Probes and protocol analyzer cross triggering.

Protocol Layer

PCIe Protocol Analyzers and exercisers provide PCIe, NVMe, and CXL emulation and monitoring of different types of systems giving maximum range of testing platforms.

Featured Products

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • ProtoSync

    Software

    The ProtoSync option extends the Teledyne LeCroy decode options by enabling industry-standard protocol analyzer software to be run directly on the oscilloscope.

  • DH Series (8-30 GHz)

    Differential Probes

    The DH series of 8 to 30 GHz active differential probes provides high input dynamic range, large offset capability, low loading and excellent signal fidelity with a range of connection options.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Compliance

Physical Layer

Perform PCI-SIG® automated compliance tests (transmitter, receiver, and industry leading Tx/Rx LinkEQ) using Teledyne LeCroy WaveMaster and LabMaster oscilloscopes, CLB/CBB fixtures from the PCI-SIG, and QualiPHY compliance test software

Show PCIe Electrical Test Solutions

Protocol Layer

Provide PCIe and NVMe compliance test suites for both hosts and devices. Ideal for self-testing your device in the comfort of your own lab. View detail results indicating specific failures. Export results to disseminate to other colleagues or subject matter experts.

Featured Products

  • QualiPHY

    Software

    QualiPHY software options QPHY-PCIE3-TX-RX, QPHY-PCIE4-TX-RX, and QPHY-PCIE5-TX-RX fully automate all aspects of PCIe compliance testing. Teledyne LeCroy provides full application support for all integrated electrical test solutions.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Problem Resolution

Protocol Layer

Capture and review traffic ensuring that all errors and issues have been resolved and that performance meets design requirements.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • Summit T416

    Protocol Analyzer

    The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Regression Testing

Protocol Layer

Bug fixes as well as software and hardware updates need to be tested, reviewed and matched against previous releases to provide forward compatibility and compliance to the specification.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

image description

Training

To create a reliable product, the user must first understand the technology and know how to use the tools needed to develop, test and debug the relevant PCI Express specification.

Get to know Austin Labs

Physical Layer

The first board turn provides the foundation for your design. Teledyne LeCroy’s WavePulser 40iX High-speed Interconnect Analyzer helps quickly and economically identify layout and interconnect issues. High Definition Oscilloscopes from 200 MHz – 8 GHz and power rail probes sniff out power integrity problems.

Featured Products

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • WavePro HD

    Oscilloscope

    Up to 5 Gpt of highly responsive acquisition memory gives more visibility into system behavior, and the exceptional analysis toolbox enables deep insight.

Physical Layer

8 GHz – 65 GHz high-bandwidth real-time oscilloscopes provide the required performance for multi-lane signal integrity testing at all data rates and all phases of the lifecycle.

Protocol Layer

PCIe Exercisers and Protocol Analyzers provide early status of bus operation and fundamental host device communication.

Featured Products

  • SDA 8 Zi-B

    Oscilloscope

    The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

  • LabMaster 10 Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly more processing power than competitors.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Protocol Layer

Protocol Exercisers, Analyzers and Jammers can provide a full range of testing by identifying any operational issues, emulating devices and systems or injecting errors into the communication path for live traffic testing.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Protocol Layer

Use of Protocol tools at this stage will ensure high performance error free operation and allow for various forms of corner case and regression testing.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Physical Layer

Debug state machine and other digital issues using ProtoSync oscilloscope-based Protocol Analysis Software, DH Series Active Differential Probes and protocol analyzer cross triggering.

Protocol Layer

PCIe Protocol Analyzers and exercisers provide PCIe, NVMe, and CXL emulation and monitoring of different types of systems giving maximum range of testing platforms.

Featured Products

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • ProtoSync

    Software

    The ProtoSync option extends the Teledyne LeCroy decode options by enabling industry-standard protocol analyzer software to be run directly on the oscilloscope.

  • DH Series (8-30 GHz)

    Differential Probes

    The DH series of 8 to 30 GHz active differential probes provides high input dynamic range, large offset capability, low loading and excellent signal fidelity with a range of connection options.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Physical Layer

Perform PCI-SIG® automated compliance tests (transmitter, receiver, and industry leading Tx/Rx LinkEQ) using Teledyne LeCroy WaveMaster and LabMaster oscilloscopes, CLB/CBB fixtures from the PCI-SIG, and QualiPHY compliance test software

Show PCIe Electrical Test Solutions

Protocol Layer

Provide PCIe and NVMe compliance test suites for both hosts and devices. Ideal for self-testing your device in the comfort of your own lab. View detail results indicating specific failures. Export results to disseminate to other colleagues or subject matter experts.

Featured Products

  • QualiPHY

    Software

    QualiPHY software options QPHY-PCIE3-TX-RX, QPHY-PCIE4-TX-RX, and QPHY-PCIE5-TX-RX fully automate all aspects of PCIe compliance testing. Teledyne LeCroy provides full application support for all integrated electrical test solutions.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Protocol Layer

Capture and review traffic ensuring that all errors and issues have been resolved and that performance meets design requirements.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • Summit T416

    Protocol Analyzer

    The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

Protocol Layer

Bug fixes as well as software and hardware updates need to be tested, reviewed and matched against previous releases to provide forward compatibility and compliance to the specification.

Featured Products

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

Test Solutions for Every Data Rate

Teledyne LeCroy provides solutions for every data rate: PCI Express® 1.0 through PCI Express 6.0. Protocol analyzers and oscilloscopes allow for a comprehensive view of your PCIe® environment, and ProtoSyncTM links Teledyne LeCroy protocol analyzers and oscilloscopes for a unified view of physical layer and protocol layer activities.

PCIe Leadership

PCIe Generations

PCI Express is the leading interconnect technology. Teledyne LeCroy offers a rich set of tools that aid in developing, testing, analyzing, and debugging PCI Express across ALL generations of the technology. Each generation offers a unique set of speed, capabilities, and features.

Teledyne LeCroy is widely recognized as having the most extensive range of test solutions and is the industry leader for all aspects of physical and protocol layer testing, and simultaneous time- correlated physical/protocol layer tests. Our physical layer and protocol layer tools work together to permit faster debug and more comprehensive support.

  • Gen 6.0
    64 GT/s

    • CrossSync PHY

      Software

      CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

    • 50 GHz LabMaster 10-50Zi-A

      Oscilloscope

      The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

    • WavePulser 40iX

      Analyzer

      The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Gen 5.0
    32 GT/s

    • Summit Z58

      Protocol Exerciser / Analyzer

      The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

    • Summit M5x

      Protocol Analyzer / Jammer

      The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

    • Summit T54

      Protocol Analyzer

      The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

    • CrossSync PHY

      Software

      CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

    • 50 GHz LabMaster 10-50Zi-A

      Oscilloscope

      The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

    • WavePulser 40iX

      Analyzer

      The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Gen 4.0
    16 GT/s

    • Summit Z416

      Exerciser

      PCIe Gen 4.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems.

    • Summit T416

      Protocol Analyzer

      The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

    • Summit T48

      Analyzer

      It is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

    • CrossSync PHY

      Software

      CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

    • 25 GHz LabMaster 10-25Zi-A

      Oscilloscope

      The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

    • WavePulser 40iX

      Analyzer

      The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Gen 3.0
    8 GT/s

    • Summit Z3-16

      Exerciser

      It can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.

    • Summit T34

      Analyzer

      It captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths

    • Summit T3-8

      Analyzer

      It captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths

    • Summit T3-16

      Analyzer

      The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4, x8, x16 lane widths.

    • CrossSync PHY

      Software

      CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

    • 13 GHz SDA 813Zi-B

      Oscilloscope

      The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

    • LabMaster 10 Zi-A

      Oscilloscope

      The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

    • WavePulser 40iX

      Analyzer

      The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Gen 2.0 & Gen 1.0
    5 GT/s - 2.5 GT/s

    • Summit T24

      Analyzer

      It is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications

    • Summit T28

      Analyzer

      captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths

    • 8 GHz SDA 808Zi-B

      Oscilloscope

      The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

    • WavePulser 40iX

      Analyzer

      The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Summit Z58

    Protocol Exerciser / Analyzer

    The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.

  • Summit M5x

    Protocol Analyzer /Jammer

    The Summit M5x is Teledyne LeCroy's PCIe/ NVMe Jammer solution and is the latest protocol analyzer targeted at high speed PCI Express 5.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit T54

    Protocol Analyzer

    The Summit T54 Protocol Analyzer captures, decodes and displays PCIe 5.0 protocol traffic data rates for x1, x2, x4 lane widths.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • 50 GHz LabMaster 10-50Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Summit Z416

    Exerciser

    PCIe Gen 4.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems.

  • Summit T416

    Protocol Analyzer

    The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • Summit T48

    Analyzer

    It is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • 25 GHz LabMaster 10-25Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Summit Z3-16

    Exerciser

    It can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.

  • Summit T34

    Analyzer

    It captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths

  • Summit T3-8

    Analyzer

    It captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths

  • Summit T3-16

    Analyzer

    The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4, x8, x16 lane widths

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • 13 GHz SDA 813Zi-B

    Oscilloscope

    The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

  • LabMaster 10 Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • Summit T24

    Analyzer

    It is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications

  • Summit T28

    Analyzer

    captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths

  • 8 GHz SDA 808Zi-B

    Oscilloscope

    The SDA 8 Zi-B combines the performance, signal fidelity and feature set needed for today’s high-speed measurements with the ease of use of a standard benchtop oscilloscope, at bandwidths from 4 to 20 GHz.

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

  • CrossSync PHY

    Software

    CrossSync PHY software and interposers merge the functions of your Teledyne LeCroy protocol analyzer and oscilloscope - giving insight into link behavior that no other instrument can provide.

  • 50 GHz LabMaster 10-50Zi-A

    Oscilloscope

    The LabMaster 10 Zi-A has superior signal fidelity from 20 GHz to 65 GHz, with a 20-core processor and up to 192 GB of RAM for significantly faster receiver test calibration and transmitter testing.

  • WavePulser 40iX

    Analyzer

    The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

On Demand Videos

 
PCI Express Electrical Test Solutions
Video
 
PCI Express 5.0 Transmitter Electrical Test
Video
 
PCI Express Transmitter Link Equalization Testing
Video
 
PCI Express Receiver Link Equalization Calibration and Test
Video
Summit M5x PCI Express Analyzer/Jammer Platform
Playlist, 9 videos
Video Library

Still have questions?

Contact Us